Ford Sync 3 Owners Manual

Action and Description
Menu Item
These change the hours and minutes of your GO Time. The
minutes change in increments of five. You can also switch the
settings for AM and PM by touching those buttons.
Time (+ and -)
These switch the setting for your selected cabin conditioning
temperature for this GO Time event. You can select from four
settings:
Cabin Conditioning
(+ and -)
Off
85°F (29.5°C)
72°F (22°C)
65°F (18.5°C)
Note: Cabin conditioning can perform differently depending on
if you plug into a 120V...

Action and Description
Menu Item
This displays the charging mode and off-peak times for your
Default Value Charge profile. The system displays off-peak times
for weekdays; the remaining hours of the day are considered peak
time. The system displays similar off-peak times for weekend
days.
Default
If you want your vehicle to immediately
charge when you plug it in at this profile
location.
Charge Now
If you want to take advantage of off-peak
electricity rates. The vehicle optimizes the
charge schedule to...

Action and Description
Menu Item
These buttons represent the voltage service that the default profile
is using. The system uses this selection to calculate estimated
charge times.
240V and 120V
Touching this button erases the Default Value Charge preferences.
Clear
Touching this button stores your Default Value Charge preferences.
If you touch the back arrow button to return to the previous screen
without saving your settings, the system does not store them and
you need to enter them again.
Save
Note:...

Description
Item
Callout
Shows the direction of power flow
between the wheels and the electric
motor.
Motor-to-Wheel Flow
A
Represents the hybrid electric motor. The
higher the motor power is, the larger the
circle around this node. Any time the
vehicle is ready to be driven, the motor
node illuminates.
Electric Motor
B
Shows the direction of power flow
between the high-voltage battery and the
electric motor. Flow toward the motor
indicates the battery is providing power to
accelerate the vehicle...

Description
Item
Callout
Represents your high-voltage battery. A
circle illuminates around the node when
the high-voltage battery is receiving power
from regenerative braking or engine char-
ging. The higher the power going into the
high-voltage battery, the larger the circle
around this node.
High Voltage Battery Power
G
Represents the fuel tank in the vehicle.
Fuel
H
Shows flow from the fuel tank to the
engine when the engine is on and using fuel
(there are some cases where the engine is
on, but not...

1
The battery-to-motor flow includes
battery power the vehicle is using for
acceleration. It does not include energy the
vehicle is using for accessories (such as air
conditioning, headlights and radio). This
screen displays accessories and climate
usage separately. 2
Accessories indicates electrical power
demands from your vehicle ’s accessory
systems. Accessories use power but do not
contribute to making the vehicle move. The
power flow displays power usage from the
climate control system and other...

Engine On due to
(Energi Only) The engine is on to optimize vehicle operation. The
vehicle returns to electric mode when possible.
Normal Operation
The engine is on to provide increased powertrain
braking. This can occur when you turn on the grade
assist feature, when speed control is on or when driving
with your foot off the accelerator pedal. Turning off
grade assist or speed control may allow the vehicle to
return to electric mode.
Engine Braking Active
Status
This indicates which mode is active...

Status
Privacy Notice for GPS Mapping with
MyFord and MyLincoln Mobile
MyFord or MyLincoln Mobile allows for GPS
mapping when a vehicle is registered to a
MyFord or MyLincoln Mobile account. To
remove the vehicle from the account,
thereby removing GPS mapping ability, a
Master Reset can be performed in the
vehicle.  See Settings (page 77).
Before transferring ownership of a vehicle,
owners may choose to execute a Master
Reset or Factory Reset (completed via the
MyFord or MyLincoln Mobile website).
Either...

Action and Descrip-
tion
Menu Item
SYNC 3 will search
and connect to
compatible app(s)
running on your
mobile device.
Find New Apps
Enabling SYNC 3 Mobile Apps
In order to enable mobile apps, SYNC 3
requires user consent to send and receive
app authorization information and updates
using the data plan associated with the
connected device.
The connected device sends data to Ford
in the United States. The information is
encrypted and includes your VIN, SYNC 3
module number, anonymous usage
statistics and...

Note:
In order to use SiriusXM Traffic and
Travel Link, your vehicle must have
navigation.
Note: A paid subscription is required to
access and use these features. Go to
www.siriusxm.com/travellink for more
information.
Note: Visit www.siriusxm.com/traffic and
click on Coverage map and details for a
complete listing of all traffic areas covered
by SiriusXM Traffic and Travel Link. Note:
Neither Sirius nor Ford is responsible
for any errors or inaccuracies in the SiriusXM
Traffic and Travel Link services...