Ford Mustang Owners Manual

AUTO: Touch to engage automatic operation, then set the temperature using
the temperature control. The system automatically controls fan speed, airflow
distribution, A/C on or off and the use of fresh or recirculated air.
G
Heated rear window:
 Turns the heated rear window on and off.  See Heated
Windows and Mirrors (page 90).
H
MAX Defrost:
 Distributes outside air through the windshield air vents and
automatically turns the air conditioning on. The fan is set to the highest speed
and the temperature to...

Voice commands
Climate on
Climate off Adjust the temperature to between 15°C (59.0°F) -
30°C (86.0°F)
Set temperature
NAVIGATION
Note: The navigation SD card must be in
the SD card slot to operate the navigation
system. If you need a replacement SD card,
contact an authorized dealer. Note:
The SD card slot is spring-loaded. To
remove the SD card, just push the card in
and release it. Do not attempt to pull the
card out to remove it; this could cause
damage.
Your navigation system is comprised of
two main...

To set your destination, enter the
necessary information into the highlighted
text fields (in any order).
For an address destination entry, press: Action and Description
Menu Item
Pressing this button makes the addresslocation appear on the map.
Go
To choose a previous destination, press: Action and Description
Menu Item
The last 20 destinations you have selectedappear.
Previous destinations
Once you have chosen you destination press: Action and Description
Menu Item
To make this your destination. You...

Action and Description
Menu Item
During route guidance, you can press the talking bubble icon
that appears in the upper right navigation corner (green bar)
if you want the system to repeat route guidance information. When the system repeats the last guidance instruction, it
updates the distance to the next guidance instruction, since it detects when the vehicle is moving.
To set route preferences press: Action and Description
Menu Item
In route preferences you can set preferences like avoidingmotorways,...

To access the settings options, press:
Menu Item
Settings
Navigation
Then select any of the following:
Map Preferences Second Level Messages, Actions and Descriptions
Menu Item
Map preferences
Then select any of the following: Display your vehicle’s previously traveled route with white dots.
You can switch this feature:
Breadcrumbs
Off
On
Have the system display your turn list:
Turn list format
Bottom to top
Top to bottom
When parking point of interest notification is on, the icons
display on the map...

Second Level Messages, Actions and Descriptions
Menu Item
Bypass route selection in destination programming. The system only
calculates one route based on preferred route setting.
Always use
preferred route
When activated, the system uses your selected route type to calculate
only one route to the desired destination.
Select a level of cost for the calculated Eco Route. The higher the
setting, the longer the time allotment is for the route.
Eco time
penalty
When activated, you can to choose to have the...

Second Level Messages, Actions and Descriptions
Menu Item
Have the system always provide a
traffic alert notification for traffic
incidents along the planned route.
You have a choice to accept or ignore
the notification before making the
route deviation.
Manual
Activate traffic alert notifications on or off.
Traffic alert notification
You can choose to activate any of the following Traffic Icon
Settings.
Traffic Icon Settings
Have the system avoid traffic problems automatically.
Switch traffic alert...

Avoid Area
Second Level Messages, Actions and Descriptions
Menu Item
Choose areas which you want the system to avoid when
calculating a route for you.
Avoid areas
Then select any of the following:
Once you make a selection, the system tries to avoid the
area(s) if possible for all routes. To program an entry, press:
Add
To delete a section choose the listing on the screen. The screen
will change, then press:
Delete
Map Mode
Press the green bar in the upper right area
of the touchscreen to view map mode....

3D map mode provides an
elevated perspective of the map.
This viewing angle can be
adjusted and the map can be
rotated 180 degrees by touching
the map twice, and then dragging your
finger along the shaded bar with arrows at
the bottom of the map.
You can also select the following
options: Menu Items
Switches between
full map, street list and exit view in
route guidance.
View
Displays a pop-upbox that allows
direct access to
navigation settings.
Menu Press the speaker button on the
map to mute route...

Home indicates the location on
the map currently stored as the
home position. You can only
save one address from the
Address Book as your Home
entry. You cannot change this icon. POI (Point Of Interest) icons
indicate locations of any point
of interest categories you choose
to display on the map. You can
choose to display three point of
interest categories on the map at one time. Starting point
 indicates the
starting point of a planned route. Waypoint indicates the location
of a waypoint on the map....