Flir ThermovisionBTS Scout Operators Manual

 431-BTS0-00-10, Revision 110 5
2 Getting Started
The Scout Bi-Ocular camera with accessories is shown packed in its 
Hard Carrying Case. The available lenses are shown in “Lens Options” 
on page 7. Refer to the packing list enclosed with your camera 
shipment to determine the actual contents of your camera package 
and lens or lenses you have purchased.
QD100
QD65
QD35
431-BTS0-00-10 Scout Bi-Oc Ops Manual.book  Page 5  Thursday, March 29, 2012  1:27 PM 

2—Getting Started Scout Bi-Ocular Operator’s Manual
6 March 2012
2–1 Scout Bi-Ocular Camera Accessories
In addition to the camera and Hard Carrying Case, Quick Start card, 
Operator’s manual, and Documentation/Training CD or DVD; the 
following items are included in the camera package:
Neck Lanyard
Hot Shoe Video Output CableSD CardAC Power Adaptor
USB Cable
Rechargeable
AA Batteries
Video Jack
431-BTS0-00-10 Scout Bi-Oc Ops Manual.book  Page 6  Thursday, March 29, 2012  1:27 PM 

Scout Bi-Ocular Operator’s Manual 2—Getting Started
 431-BTS0-00-10, Revision 110 7
2–2 Lens Options
The QD35, QD65, and QD100 manual focus lenses (as selected at 
purchase) include a lens cap, rear lens cover, and lens cloth. Each lens 
has a dedicated storage location in the Hard Carrying Case, or the 
case can be adjusted to store the lens while still attached to the 
camera. 
Refer to “Field of View” on page30 for field of view details and 
minimum focus distance; and “Range Detection” on page 31 for...

2—Getting Started Scout Bi-Ocular Operator’s Manual
8 March 2012
431-BTS0-00-10 Scout Bi-Oc Ops Manual.book  Page 8  Thursday, March 29, 2012  1:27 PM 

 431-BTS0-00-10, Revision 110 9
3 Operating Your Camera
3–1 Camera Features and Controls
Power ZoomWhite hot/
Display 
Black hot/
EyepieceCapture
Brightness
SD Card
doorBatterydoor
Tripod mount
Hot Shoe 
contacts
Interocular
Adjustment
Instalert
Manual Focus Ring
(Option lenses)
431-BTS0-00-10 Scout Bi-Oc Ops Manual.book  Page 9  Thursday, March 29, 2012  1:27 PM 

3—Operating Your Camera Scout Bi-Ocular Operator’s Manual
10 March 2012
3–2 Installing the SD Card
Install the SD card included with your camera package as follows:
1.  Remove the small SD card door. 
No tools are required. 
2.  Install the SD card into card 
slot with label facing the 
front of the camera.
3.  S nap t he SD car d do or back 
into place, ensuring that 
the rubber lanyard retracts 
into the camera.
Grasp spring loaded buttons on SD card door edges and pull 
431-BTS0-00-10 Scout Bi-Oc Ops...

Scout Bi-Ocular Operator’s Manual 3—Operating Your Camera
 431-BTS0-00-10, Revision 110 11
3–3 Installing the Batteries
The batteries must be installed and charged before using your 
camera.
1.  Pull off the battery cover by 
lifting the latch as shown at the 
right.
2.  Install the batteries 
paying attention to 
the positive and 
negative markings, 
as shown at the 
right. 
3.  Re-install the battery 
cover by engaging 
the hinge and 
snapping the latch 
back in place.
If you have installed...

3—Operating Your Camera Scout Bi-Ocular Operator’s Manual
12 March 2012
3–4 Charging the Camera
The batteries in the camera must be fully charged prior to use. If not 
fully charged or if the recommended batteries are not installed, the 
battery status indicator may not accurately reflect the remaining 
battery life.
1.  Connect the Hot Shoe to your camera.
2.  Plug the power adapter provided with the camera into its power 
source and also into the Hot Shoe.
3.  Ensure that the plug is fully 
seated in...

Scout Bi-Ocular Operator’s Manual 3—Operating Your Camera
 431-BTS0-00-10, Revision 110 13
3–5 Scout Bi-Ocular Power Management
Your Scout Bi-Ocular camera is equipped with a power management 
system that provides up to five hours of continuous operation and up 
to five days of standby time between battery charges. To make the 
best use of the camera and to assure it is always ready when you need 
it, it is important to understand the basic power states of the camera.
The Scout Bi-Ocular camera is...

3—Operating Your Camera Scout Bi-Ocular Operator’s Manual
14 March 2012
Power States
• There are three power states: Off, On, and Standby
• The initial power-on Bootup process between the Off state and 
the On state takes about 90 seconds (fast flashing red state 
LED). During the Bootup process, pressing the Power button 
again will turn the camera off. After the camera finishes its 
power-on Bootup process, it is in the On state (state LED is off). 
After the camera is On, pressing the Power button...