FDT FD7903 User Manual

 
FDT Technologies-http://www.fdt.us 
 
 
2) Wireless 
Here you can search the WIFI AP around your camera, then select and apply one of them 
to your camera. Please make sure you enable the wifi before you start to use it. 
You can also check your settings by click the “Check” button after you save your settings. 
  

 
FDT Technologies-http://www.fdt.us 
 
Note: The FDT camera use the wired Ethernet cable by default, it will work on the 
wireless status automatically if you disconnect the Ethernet cable. But the wireless will not 
work if you still connect the Ethernet cable in your camera. 
 
3) DDNS 
Here you can set the third-party DDNS like Dyndns.org/3322.org/dynddns.us/No-ip.com 
and the status of the UPnP for your camera. You can get the public IP address of the LAN 
your camera works by click the “Query”...

 
FDT Technologies-http://www.fdt.us 
 
 
5) P2P 
Here you can query the UID of your camera for P2P, and you can enable or disable the 
P2P feature of your camera as you need. 
 
 
6.4.3 Alarm 
1) Audio Alarm 
Here you can enable/disable the audio alarm of your camera. You can set the sensitivity of 
the audio alarm for the responding of your camera. 
 
 
2) Motion Detection(Only for IE/Firefox in windows) 
Here you can set the areas for the motion detection and the sensitivity of each area. You 
can...

 
FDT Technologies-http://www.fdt.us 
 
 
3) Alarm link 
Here you can enable or disable the alarm actions once the alarm triggered, including send 
email with picture, save alarm picture or video to SD card or FTP server, go to one certain 
preset point and also the picture numbers for capturing. 
 
 
4) Schedule 
Here you can set the schedule for the motion detection alarm, red means enable and  

 
FDT Technologies-http://www.fdt.us 
white means disable. You can select certain one or several days or hours you like to 
enable or disable the motion detection features. 
 
 
6.4.4 Advance 
1) User 
Here you can edit the account information of the FDT camera, such as change the 
username or password, the default account is admin/admin. 
 
 
2) Auto Snap 
Here you can set the save path and time interval for the feature of capture pictures 
automatically. You can select to save the picture to SD card,...

 
FDT Technologies-http://www.fdt.us 
 
 
4) Email 
Here you can set the sending or receiving email for your email alarm. 
Note:  
SMTP port is usually set as 25. Some SMTP servers have special port, such as 587 or 
465. 
Authentication is used for transport layer security, it is usually none. If you use gmail and 
enable the authentication with TLS or STARTTLS, the SMTP port must be set to 465 or 
587, it depends the authentication type you selected. 
You can click the “Test” button to check whether...

 
FDT Technologies-http://www.fdt.us 
 
 
6) PTZ 
Here you can set the configurations about Pan/Tilt motion for your camera. 
Cruise cycles decide the time for your vertical and horizontal cruise. 
If you enable the “Return to center preset”, it will go to the center preset when the cruise is 
complete. 
The “Indicator Display Mode” decides the status for the system LED status in the 
front-head of the Pan/Tilt. 
 
 
7) Multiple Setting(Only for IE in windows) 
Here you can search the FDT cameras in your...

 
FDT Technologies-http://www.fdt.us 
 
 
 
8) Privacy Mask(Only for IE/Firefox in windows) 
Here you can set the area and color for the privacy mask of your camera, it up to 4 areas. 
You can set the color of the mask, change the size of the area by dragging the 
right-bottom corner, change the position of the area by dragging the area.  

 
FDT Technologies-http://www.fdt.us 
 
 
6.4.5 System 
1) Time 
Here you can set the time and date, the status for NTP and DST, the time zone for your 
camera. 
 
 
2) Maintenance  

 
FDT Technologies-http://www.fdt.us 
 
Reboot: reboot the camera. 
Factory Default: restore the camera settings to the factory default settings. 
Backup Configuration: backup the current settings of the camera, it will generate a file 
name “config_backup.bin” for you to save.  
Restore Configuration: Import and restore the configuration file you backup before. 
Please browse and select the file you want to import, then click the “Import” button. 
Upgrade: Upgrade the firmware. Please browse and select...