Farberware Millennium SS Blender FBL500SS User Manual
Have a look at the manual Farberware Millennium SS Blender FBL500SS User Manual online for free. It’s possible to download the document as PDF or print. UserManuals.tech offer 39 Farberware manuals and user’s guides for free. Share the user manual or guide on Facebook, Twitter or Google+.
USE & CARE INSTRUCTIONS 2 SPEED BLENDER FBL500SS LIMITED ONE-YEAR WARRANTY Warranty Coverage: This product is warranted to be free from defects in materials or workmanship for a period of one (1) year from the original purchase date. This product warranty is extended only to the original consumer purchaser of the product and is not transferable. For a period of one (1) year from the date of original purchase of the product, our Repair Center will, at its option, either (1) repair the product or (2) replace the product with a reconditioned comparable model. These remedies are the purchasers exclusive remedies under this warranty. Warranty Service: To obtain warranty service, you must call our warranty service number at 1-800-233-9054 for return instructions on how to deliver the product, in either the original packaging or packaging affording an equal degree of protection to the Repair Center specified below. You must enclose a copy of your sales receipt or other proof of purchase to demonstrate eligibility for warranty coverage. To returnthe appliance, ship to:To contact us,please write to, call, or email: ATTN: Repair Center Consumer Relations Department 708 South Missouri Street PO Box 7366 Macon, MO 63552 USA Columbia MO 65205-7366 USA 1-800-233-9054 E-mail:[email protected] What Is Not Covered: This warranty does not cover damage resulting from misuse, accident, commercial use, improper service or any other damage caused by anything other than defects in material or workmanship during ordinary consumer use. This warranty is invalid if the serial number has been altered or removed from the product. This warranty is valid only in the United States and Canada. LIMITATION ON DAMAGES: THERE SHALL BE NO LIABILITY FOR ANY INCIDENTAL OR CONSEQUENTIAL DAMAGES FOR BREACH OF ANY EXPRESS OR IMPLIED WARRANTY OR CONDITION ON THIS PRODUCT. DURATION OF IMPLIED WARRANTIES: EXCEPT TO THE EXTENT PROHIBITED BY APPLICABLE LAW, ALL IMPLIED WARRANTIES AND CONDITIONS, INCLUDING, WITHOUT LIMITATION, IMPLIED WARRANTIES AND CONDITIONS OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE OR USE ON THIS PRODUCT ARE LIMITED IN DURATION TO THE DURATION OF THIS WARRANTY. Some jurisdictions do not allow the exclusion or limitation of incidental or consequential damages, or allow limitations on how long an implied warranty lasts, so the above limitations or exclusions may not apply to you. This warranty gives you specific legal rights and you may have other rights under the laws of your jurisdiction. FARBERWARE® and Millennium® are registered trademarks of Farberware Inc.® Manufactured and sold pursuant to a license from Farberware Inc.® For more information on our products, visit our website: www.maxim-toastmaster.com. ©2006 All rights reserved. P/N 61835 Made in China 1/06 FBW_FBL500SS_IB_9-1-06 1/9/06 2:35 PM Page 1
6 USER MAINTENANCE INSTRUCTIONS This appliance requires little maintenance. It contains no user serviceable parts. Do not try to repair it yourself. Any servicing that requires disassembly other than cleaning must be performed by a qualified appliance repair technician. CAUTION: Never immerse the Motor Housing, plug or cord in water or any other liquid. 1. Always unplug the unit before cleaning. 2. Whenever possible, rinse parts immediately after processing to make cleanup easier. CAUTION: Use extreme care when handling the Blade Assembly. Do not touch the Blades with your fingers. The Blades are very sharp and can cause injury if touched. 3. Wash the Glass Blending Jar, Lid, Measuring Cap and Blade Assembly in warm soapy water. Rinse and dry thoroughly. Never use rough scouring pads or abrasive cleansers on any plastic or metal parts as the surface may be damaged. Do not wash any parts in the dishwasher. 4. If necessary, wipe exterior surface with a moist cloth or sponge and dry thoroughly. 5. Do not fill the Glass Blending Jar with boiling water or place any of the parts in boiling water. 6. Do not allow the Blade Assembly to soak in water for long periods of time. 7. For quick clean-ups, the interior of the Glass Blending Jar can be cleaned by using the PULSE setting. Plug the Blender into an electrical outlet and simply pour some warm water and a small amount of detergent into the Glass Blending Jar. Turn the Control Dial to (P) PULSE. Repeat for several short bursts. The unit will clean itself, without you having to handle the sharp Blades. Unplug the Blender, rinse and dry thoroughly, being careful as the Blades are sharp. 8. Properly reassemble all parts before storing. STORAGE CAUTION: Always assemble clean and dry Blender parts correctly before storing on the Motor Housing. Severe injury can result if Blender is accidentally turned ON when not properly assembled. Unplug and clean unit. Store in original box or in a clean, dry place. Never store Blender while it is hot or plugged in. Never wrap cord tightly around the appliance. Never place any stress on cord, especially where the cord enters the unit, as this could cause the cord to fray and break. 1 IMPOR TANT SAFEGUARDS When using electrical appliances, basic safety precautions should always be followed including the following: 1. Read all instructions. 2. To protect against risk of electrical shock do not put cord, plugs, or appliance in water or other liquid. 3. Close supervision is necessary when any appliance is used by or near children. 4. Unplug from outlet when not in use, before putting on or taking off parts, and before cleaning. 5. Avoid contacting moving parts. 6. Do not operate any appliance with a damaged cord or plug or after the appliance malfunctions, or is dropped or damaged in any manner. Contact Consumer Service for examination, repair or electrical or mechanical adjustment. 7. The use of attachments, including canning jars, not recommended by the manufacturer may cause a risk of injury to persons. 8. Do not use outdoors. 9. Do not let cord hang over edge of table or counter. 10. Do not let cord contact any hot surface, including the stove. 11.Keep hands and utensils out of the Glass Blending Jar while blending to reduce the risk of severe injury to persons or damage to the Blender. A scraper may be used but must be used only when the Blender is not running. 12. Blades are sharp. Handle carefully. 13. To reduce the risk of injury, never place Blade Assembly on Motor Housing without Blending Jar properly attached. 14. Always operate Blender with Blending Jar Lid in place. 15. Do not blend hot liquids. SAVE THESE INSTRUCTIONS THIS PRODUCT IS FOR HOUSEHOLD USE ONLY FBW_FBL500SS_IB_9-1-06 1/9/06 2:35 PM Page 3
6. Plug the power cord into a 120V AC electrical outlet. Turn the Control Dial to the desired speed setting: 1 is the lower speed; 2 is the higher. Blend until ingredients have reached desired consistency. CAUTION: If Glass Blending Jar rotates during blending, immediately turn Control Dial to (O) OFF, then secure by tightening the Collar and Blade Assembly on Blending Jar. •Do not touch Blades •Do not interfere with the Blade movement •Do not remove Blending Jar Lid 7. When blending is completed, turn the Control Dial to (O) OFF to stop the Blender and unplug the unit. PULSE SETTING 1. For short bursts of power, use the PULSE setting. Turn the Control Dial to (P) PULSE. 2. When pulsing is completed, turn the Control Dial to (O) OFF to stop the Blender. Unplug the unit. CRUSHING ICE Add 1 cup of ice cubes, about 9, to the Glass Blending Jar. Place the Lid on Glass Blending Jar then repeatedly turn the Control Dial to (P) PULSE until the cubes are reduced. 5 OPERATING INSTRUCTIONS (CONTINUED) 2ADDITIONAL IMPORTANT SAFEGUARDS 1. All users of this appliance must read and understand this Owner’s Manual before operating or cleaning this appliance. 2. The cord to this appliance should be plugged into a 120V AC electrical outlet only. 3. Do not leave this appliance unattended during use. 4. If this appliance begins to malfunction during use, immediately turn the Control Dial to the (O) OFF position and unplug the cord. Do not use or attempt to repair the malfunctioning appliance. 5. If this appliance falls or accidentally becomes immersed in water, unplug it immediately. Do not reach into the water! Do not use this appliance after it has fallen into or becomes immersed in water. 6. To reduce the risk of injury to persons or property, never use this appliance in an unstable position. 7. Do not use this appliance for other than its intended use. 8. Do not use if the Glass Blending Jar is cracked or chipped. POLARIZED PLUG This appliance has a polarized plug (one blade is wider than the other). To reduce the risk of electric shock, this plug is intended to fit into a polarized outlet only one way. If the plug does not fit fully in the outlet, reverse the plug. If it still does not fit, contact a qualified electrician. Do not attempt to modify the plug in any way. SHORT CORD INSTRUCTIONS Ashort power-supply cord is provided to reduce the risk resulting from becoming entangled in or tripping over a longer cord. Do not use an extension cord with this product. ELECTRIC POWER If the electrical circuit is overloaded with other appliances, your appliance may not operate properly. It should be operated on a separate electrical circuit from other appliances. PLASTICIZER WARNING CAUTION: To prevent Plasticizers from migrating from the finish of the counter top or table top or other furniture, place NON-PLASTICcoasters or place mats between the appliance and the finish of the counter top or table top. Failure to do so may cause the finish to darken. Permanent blemishes may occur or stains can appear. FBW_FBL500SS_IB_9-1-06 1/9/06 2:35 PM Page 5
4 BLENDER ASSEMBLY INSTRUCTIONS NOTE: Before assembling, make sure the cord is unplugged and the Control Dial is in (O) OFF position. CAUTION: Use extreme care when handling the Blade Assembly. Do not touch Blades with your fingers. The Blades are very sharp and can cause injury if touched. 1. Carefully place the Rubber Seal Ring over the Blade Assembly. 2. Place the Blade Assembly in the Glass Blending Jar. 3. Place the Collar over the Blade Assembly. Hold the Glass Blending Jar and turn the Collar clockwise to firmly secure it into position on the Glass Blending Jar. NOTE: The Collar and Blade must be firmly attached to the Blending Jar before putting any foods or liquids into the Blending Jar. OPERATING INSTRUCTIONS CAUTION: Keep hands and utensils out of the Blending Jar while blending to prevent the possibility of severe injury to persons or damage to the unit. A scraper may be used but must only be used when the unit is not running. CAUTION: Use extreme care when handling the Blade Assembly. Do not touch Blades with your fingers. The Blades are very sharp and can cause injury if touched. 1. Before starting, make sure power cord is unplugged and the Control Dial is in (O) OFF position. 2. Make sure that the Blade Assembly, Rubber Seal Ring, and Collar are properly assembled and securely fastened to the Blending Jar. See Assembly Instructions for details. 3. Place the Blending Jar on top of the Motor Housing making sure it is firmly seated and not tilting to one side. CAUTION: Never place the Blade Assembly on the Motor Housing without the Blending Jar being completely assembled and securely tightened. 4. Add ingredients to the Glass Blending Jar and secure the Blending Jar Lid. NOTE: Do not fill the Glass Blending Jar more than 3/4 full, 4.5 cups (36-oz.). Never operate when the Blending Jar is empty. 5. Place Blending Jar Lid with Measuring Cap on Glass Blending Jar. IMPORTANT: Always hold Lid in place during processing. BEFORE USING FOR THE FIRST TIME CAUTION: Use extreme care when handling the Blade Assembly. Do not touch the Blades with your fingers. The Blades are very sharp and can cause injury if touched. 1. Carefully unpack the Blender, Glass Blending Jar, and all parts. 2. Wash the Measuring Cap, Rubber Seal Ring, Glass Blending Jar, Blending Jar Lid, and Blade Assembly in warm soapy water. Rinse and dry thoroughly. 3. Make sure the cord is unplugged and the Control Dial is in the (O) OFF position. CAUTION: To protect against risk of electrical shock, do not place Motor Housing, plug or cord in water or any other liquid. 4. Wipe the Motor Housing clean with a moistened cloth. Dry thoroughly. GETTING TO KNOW YOUR FARBERWARE® 2 SPEED BLENDER PRODUCT MAY VARY SLIGHTLY FROM ILLUSTRATIONS 9. 8. 6. 1. 2. 3. 4. 5. 3 7. 1. Measuring Cap (P/N 71192) 2. Blending Jar Lid (P/N 71193) 3. Glass Blending Jar (P/N 71194) 4. Rubber Seal Ring (P/N 71195) 5. Blade Assembly (P/N 71196) 6. Collar (P/N 71197) 7. Motor Housing 8. Control Dial 9. Power Cord with Polarized Plug Control Dial FBW_FBL500SS_IB_9-1-06 1/9/06 2:35 PM Page 7
4 BLENDER ASSEMBLY INSTRUCTIONS NOTE: Before assembling, make sure the cord is unplugged and the Control Dial is in (O) OFF position. CAUTION: Use extreme care when handling the Blade Assembly. Do not touch Blades with your fingers. The Blades are very sharp and can cause injury if touched. 1. Carefully place the Rubber Seal Ring over the Blade Assembly. 2. Place the Blade Assembly in the Glass Blending Jar. 3. Place the Collar over the Blade Assembly. Hold the Glass Blending Jar and turn the Collar clockwise to firmly secure it into position on the Glass Blending Jar. NOTE: The Collar and Blade must be firmly attached to the Blending Jar before putting any foods or liquids into the Blending Jar. OPERATING INSTRUCTIONS CAUTION: Keep hands and utensils out of the Blending Jar while blending to prevent the possibility of severe injury to persons or damage to the unit. A scraper may be used but must only be used when the unit is not running. CAUTION: Use extreme care when handling the Blade Assembly. Do not touch Blades with your fingers. The Blades are very sharp and can cause injury if touched. 1. Before starting, make sure power cord is unplugged and the Control Dial is in (O) OFF position. 2. Make sure that the Blade Assembly, Rubber Seal Ring, and Collar are properly assembled and securely fastened to the Blending Jar. See Assembly Instructions for details. 3. Place the Blending Jar on top of the Motor Housing making sure it is firmly seated and not tilting to one side. CAUTION: Never place the Blade Assembly on the Motor Housing without the Blending Jar being completely assembled and securely tightened. 4. Add ingredients to the Glass Blending Jar and secure the Blending Jar Lid. NOTE: Do not fill the Glass Blending Jar more than 3/4 full, 4.5 cups (36-oz.). Never operate when the Blending Jar is empty. 5. Place Blending Jar Lid with Measuring Cap on Glass Blending Jar. IMPORTANT: Always hold Lid in place during processing. BEFORE USING FOR THE FIRST TIME CAUTION: Use extreme care when handling the Blade Assembly. Do not touch the Blades with your fingers. The Blades are very sharp and can cause injury if touched. 1. Carefully unpack the Blender, Glass Blending Jar, and all parts. 2. Wash the Measuring Cap, Rubber Seal Ring, Glass Blending Jar, Blending Jar Lid, and Blade Assembly in warm soapy water. Rinse and dry thoroughly. 3. Make sure the cord is unplugged and the Control Dial is in the (O) OFF position. CAUTION: To protect against risk of electrical shock, do not place Motor Housing, plug or cord in water or any other liquid. 4. Wipe the Motor Housing clean with a moistened cloth. Dry thoroughly. GETTING TO KNOW YOUR FARBERWARE® 2 SPEED BLENDER PRODUCT MAY VARY SLIGHTLY FROM ILLUSTRATIONS 9. 8. 6. 1. 2. 3. 4. 5. 3 7. 1. Measuring Cap (P/N 71192) 2. Blending Jar Lid (P/N 71193) 3. Glass Blending Jar (P/N 71194) 4. Rubber Seal Ring (P/N 71195) 5. Blade Assembly (P/N 71196) 6. Collar (P/N 71197) 7. Motor Housing 8. Control Dial 9. Power Cord with Polarized Plug Control Dial FBW_FBL500SS_IB_9-1-06 1/9/06 2:35 PM Page 7
6. Plug the power cord into a 120V AC electrical outlet. Turn the Control Dial to the desired speed setting: 1 is the lower speed; 2 is the higher. Blend until ingredients have reached desired consistency. CAUTION: If Glass Blending Jar rotates during blending, immediately turn Control Dial to (O) OFF, then secure by tightening the Collar and Blade Assembly on Blending Jar. •Do not touch Blades •Do not interfere with the Blade movement •Do not remove Blending Jar Lid 7. When blending is completed, turn the Control Dial to (O) OFF to stop the Blender and unplug the unit. PULSE SETTING 1. For short bursts of power, use the PULSE setting. Turn the Control Dial to (P) PULSE. 2. When pulsing is completed, turn the Control Dial to (O) OFF to stop the Blender. Unplug the unit. CRUSHING ICE Add 1 cup of ice cubes, about 9, to the Glass Blending Jar. Place the Lid on Glass Blending Jar then repeatedly turn the Control Dial to (P) PULSE until the cubes are reduced. 5 OPERATING INSTRUCTIONS (CONTINUED) 2ADDITIONAL IMPORTANT SAFEGUARDS 1. All users of this appliance must read and understand this Owner’s Manual before operating or cleaning this appliance. 2. The cord to this appliance should be plugged into a 120V AC electrical outlet only. 3. Do not leave this appliance unattended during use. 4. If this appliance begins to malfunction during use, immediately turn the Control Dial to the (O) OFF position and unplug the cord. Do not use or attempt to repair the malfunctioning appliance. 5. If this appliance falls or accidentally becomes immersed in water, unplug it immediately. Do not reach into the water! Do not use this appliance after it has fallen into or becomes immersed in water. 6. To reduce the risk of injury to persons or property, never use this appliance in an unstable position. 7. Do not use this appliance for other than its intended use. 8. Do not use if the Glass Blending Jar is cracked or chipped. POLARIZED PLUG This appliance has a polarized plug (one blade is wider than the other). To reduce the risk of electric shock, this plug is intended to fit into a polarized outlet only one way. If the plug does not fit fully in the outlet, reverse the plug. If it still does not fit, contact a qualified electrician. Do not attempt to modify the plug in any way. SHORT CORD INSTRUCTIONS Ashort power-supply cord is provided to reduce the risk resulting from becoming entangled in or tripping over a longer cord. Do not use an extension cord with this product. ELECTRIC POWER If the electrical circuit is overloaded with other appliances, your appliance may not operate properly. It should be operated on a separate electrical circuit from other appliances. PLASTICIZER WARNING CAUTION: To prevent Plasticizers from migrating from the finish of the counter top or table top or other furniture, place NON-PLASTICcoasters or place mats between the appliance and the finish of the counter top or table top. Failure to do so may cause the finish to darken. Permanent blemishes may occur or stains can appear. FBW_FBL500SS_IB_9-1-06 1/9/06 2:35 PM Page 5
6 USER MAINTENANCE INSTRUCTIONS This appliance requires little maintenance. It contains no user serviceable parts. Do not try to repair it yourself. Any servicing that requires disassembly other than cleaning must be performed by a qualified appliance repair technician. CAUTION: Never immerse the Motor Housing, plug or cord in water or any other liquid. 1. Always unplug the unit before cleaning. 2. Whenever possible, rinse parts immediately after processing to make cleanup easier. CAUTION: Use extreme care when handling the Blade Assembly. Do not touch the Blades with your fingers. The Blades are very sharp and can cause injury if touched. 3. Wash the Glass Blending Jar, Lid, Measuring Cap and Blade Assembly in warm soapy water. Rinse and dry thoroughly. Never use rough scouring pads or abrasive cleansers on any plastic or metal parts as the surface may be damaged. Do not wash any parts in the dishwasher. 4. If necessary, wipe exterior surface with a moist cloth or sponge and dry thoroughly. 5. Do not fill the Glass Blending Jar with boiling water or place any of the parts in boiling water. 6. Do not allow the Blade Assembly to soak in water for long periods of time. 7. For quick clean-ups, the interior of the Glass Blending Jar can be cleaned by using the PULSE setting. Plug the Blender into an electrical outlet and simply pour some warm water and a small amount of detergent into the Glass Blending Jar. Turn the Control Dial to (P) PULSE. Repeat for several short bursts. The unit will clean itself, without you having to handle the sharp Blades. Unplug the Blender, rinse and dry thoroughly, being careful as the Blades are sharp. 8. Properly reassemble all parts before storing. STORAGE CAUTION: Always assemble clean and dry Blender parts correctly before storing on the Motor Housing. Severe injury can result if Blender is accidentally turned ON when not properly assembled. Unplug and clean unit. Store in original box or in a clean, dry place. Never store Blender while it is hot or plugged in. Never wrap cord tightly around the appliance. Never place any stress on cord, especially where the cord enters the unit, as this could cause the cord to fray and break. 1 IMPOR TANT SAFEGUARDS When using electrical appliances, basic safety precautions should always be followed including the following: 1. Read all instructions. 2. To protect against risk of electrical shock do not put cord, plugs, or appliance in water or other liquid. 3. Close supervision is necessary when any appliance is used by or near children. 4. Unplug from outlet when not in use, before putting on or taking off parts, and before cleaning. 5. Avoid contacting moving parts. 6. Do not operate any appliance with a damaged cord or plug or after the appliance malfunctions, or is dropped or damaged in any manner. Contact Consumer Service for examination, repair or electrical or mechanical adjustment. 7. The use of attachments, including canning jars, not recommended by the manufacturer may cause a risk of injury to persons. 8. Do not use outdoors. 9. Do not let cord hang over edge of table or counter. 10. Do not let cord contact any hot surface, including the stove. 11.Keep hands and utensils out of the Glass Blending Jar while blending to reduce the risk of severe injury to persons or damage to the Blender. A scraper may be used but must be used only when the Blender is not running. 12. Blades are sharp. Handle carefully. 13. To reduce the risk of injury, never place Blade Assembly on Motor Housing without Blending Jar properly attached. 14. Always operate Blender with Blending Jar Lid in place. 15. Do not blend hot liquids. SAVE THESE INSTRUCTIONS THIS PRODUCT IS FOR HOUSEHOLD USE ONLY FBW_FBL500SS_IB_9-1-06 1/9/06 2:35 PM Page 3
USE & CARE INSTRUCTIONS 2 SPEED BLENDER FBL500SS LIMITED ONE-YEAR WARRANTY Warranty Coverage: This product is warranted to be free from defects in materials or workmanship for a period of one (1) year from the original purchase date. This product warranty is extended only to the original consumer purchaser of the product and is not transferable. For a period of one (1) year from the date of original purchase of the product, our Repair Center will, at its option, either (1) repair the product or (2) replace the product with a reconditioned comparable model. These remedies are the purchasers exclusive remedies under this warranty. Warranty Service: To obtain warranty service, you must call our warranty service number at 1-800-233-9054 for return instructions on how to deliver the product, in either the original packaging or packaging affording an equal degree of protection to the Repair Center specified below. You must enclose a copy of your sales receipt or other proof of purchase to demonstrate eligibility for warranty coverage. To returnthe appliance, ship to:To contact us,please write to, call, or email: ATTN: Repair Center Consumer Relations Department 708 South Missouri Street PO Box 7366 Macon, MO 63552 USA Columbia MO 65205-7366 USA 1-800-233-9054 E-mail:[email protected] What Is Not Covered: This warranty does not cover damage resulting from misuse, accident, commercial use, improper service or any other damage caused by anything other than defects in material or workmanship during ordinary consumer use. This warranty is invalid if the serial number has been altered or removed from the product. This warranty is valid only in the United States and Canada. LIMITATION ON DAMAGES: THERE SHALL BE NO LIABILITY FOR ANY INCIDENTAL OR CONSEQUENTIAL DAMAGES FOR BREACH OF ANY EXPRESS OR IMPLIED WARRANTY OR CONDITION ON THIS PRODUCT. DURATION OF IMPLIED WARRANTIES: EXCEPT TO THE EXTENT PROHIBITED BY APPLICABLE LAW, ALL IMPLIED WARRANTIES AND CONDITIONS, INCLUDING, WITHOUT LIMITATION, IMPLIED WARRANTIES AND CONDITIONS OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE OR USE ON THIS PRODUCT ARE LIMITED IN DURATION TO THE DURATION OF THIS WARRANTY. Some jurisdictions do not allow the exclusion or limitation of incidental or consequential damages, or allow limitations on how long an implied warranty lasts, so the above limitations or exclusions may not apply to you. This warranty gives you specific legal rights and you may have other rights under the laws of your jurisdiction. FARBERWARE® and Millennium® are registered trademarks of Farberware Inc.® Manufactured and sold pursuant to a license from Farberware Inc.® For more information on our products, visit our website: www.maxim-toastmaster.com. ©2006 All rights reserved. P/N 61835 Made in China 1/06 FBW_FBL500SS_IB_9-1-06 1/9/06 2:35 PM Page 1