European American Armory Pump Action Shotgun Izh81 Instructions Manual

11 **WARNING**
Never insert the magazine into the receiver
until you are ready to fire the shotgun...
7) FIG 5:  With the forearm / slide in the
rearward position, push the magazine release
lever forward to permit insertion of the
magazine. A pendulum motion of the
magazine during insertion insures that the lips
of the magazine body will be to securely
engaged.
8) FIG 6:  With the magazine in place slide the
forearm / slide forward until the action locks.
This procedure will load a cartridge into the...

12 2)  Engage safety if not already engaged
3)  To begin firing disengage the safety, make sure you are ready to fire and the
shotgun is pointed in a safe direction to be fired. After you have fired the first
round by pulling the trigger to the rear move the forearm / slide back to the rear
and the spent cartridge will be ejected. When you move the forearm / slide
forward the bolt will strip a round from the magazine and load it into the
chamber. If you pull the trigger again the gun will fire. You may...

13 CLEANING AND MAINTENANCE OF SHOTGUN
A)  Follow procedures for unloading shotgun as described previously
B)  Follow procedures for disassembly of shotgun as described previously
1) Materials needed to clean this shotgun are: a cleaning rod, cotton bore
patches, brass bore brush, powder solvent, a small soft brush and good quality
gun oil.
WARNING: Lead or lead compounds are known to the State of California to
cause cancer, birth defects, reproductive toxicity, and other serious physical
injury.  Those...

14 occurring in connection with or as the result of the use of European American
Armory shotguns of faulty, non-standard, remanufactured, hand loaded or
reloaded ammunition, used cartridges or cartridges other than factory
cartridges for which the firearm was originally chambered.
LUBRICATION WARNING
Firing a shotgun with oil, grease or any other material even partially obstructing
the bore may result in damage to the shotgun and injury to the shooter and
those nearby.  Do not spray or apply lubricants...

15 W A R N I N G
Altering or modifying parts and/or internal safeties is dangerous and will void
the warranty.  This shotgun was manufactured to perform properly with the
original parts as designed.  It is your duty to make sure any parts you buy are
made for this firearm and are installed correctly and that neither the
replacements nor originals are altered or changed.  Your gun is a complex
precision tool with many parts that must relate correctly to other parts in order
for proper and safe operation....

161.barrel
2.choke tube
3.receiver
4.magazine
5.barrel nut
6.forend with slide bar
7.breech bolt
8.firing pin
9.firing pin spring
10.bolt slide
11.extractor
12.extractor spring
13.extractor plunger
14.pin
15.bolt lock
16.extractor
17.extractor spring
18.firing mechanism plate
19.elevator
20.hammerPARTS LIST
Fig. 1 - IZH81M or KM Exploded View
21.sear
22.trigger with pushing rod
23.pin
24.hammer pin
25.mainspring plunger
26.mainspring
27.sear plunger
28.sear spring
29.detent button
30.detent
31.firing...