European American Armory Double Action Revolver Windicator Instruction Manual

Windicator Series
DOUBLE ACTION REVOLVER 

EAA MODEL: EA/R (WINDICATOR)
DOUBLE ACTION REVOLVER
READ THESE INSTRUCTIONS
MANUAL FOR:
MODEL NUMBER
EAIR
BARREL LENGTHCALIBERSFINISH
4” or 
6”.22LR or 22WRMB
2” or 4” or 6”38SPLB orC
2” or 4” or 6”.36SPL or 367MAGB
FINISH CODE:
B=BLUE, C=CHROME
GENERAL INFORMATION
Capacity - 6 chambers (load only 5); Internal Safety
Sights 
- fixed or adjustable ; Grips - Synthetic
Weight (average) 
- 2” Barrel = 26 oz., 4” = 30 oz., 6” = 34 oz.
FOR YOUR SAFETY AND THE SAFETY OF OTHERS, this owner’s manual con-
tains...

TYPE OF AMMUNITION TO BE USEDIt is suggested that high quality commercially manufactured ammunition be used
in this firearm. Some factory ammunition works better than others and you
should stick with the brand you find works well in your revolver. Avoid military
surplus or hot loaded ammo. The use of reloaded. Super-Vel. 
+P hiah oressure
or hand loaded ammunition will void the warrantv.NOTICE
REVOLVERS ARE CLASSIFIED AS FIREARMS OR DANGEROUS WEAPONS and
are sold by European American Armory Corporation...

6. NEVER assume any gun is unloaded. Before handling, check to make sure all
the firing chambers are empty. See unloading Instructions and then unload
any ammunition.Make sure you know that this or any firearm is fully unloaded
before displaying or handling it. When handling any firearm, keep your fingers
away from the trigger at all times until you intend to fire.
7. WARNING: The actual firearm does not contain any lead; however, it does fire
ammunition containing lead or lead compounds known to the...

Store guns and ammunition separately beyond the reach of children.
Make sure that they are properly secured so untrained individuals and children
will be denied access to your guns and ammo.
Test your gun’s operation and safeties only at a shooting range while the firearm
is pointed in a safe direction.
Know your target and what is beyond. Ask yourself what your bullet will 
hll if it
misses the target or passes through the intended target.Remember, a fired bullet
can travel over a mile (including a...

Do NOT alter or modify your gun.Don’t try to change your gun’s trigger pull,
because it may affect sear engagement and thereby cause accidental firing.
Do NOT remove any internal safety or safety device on the firearm. Safety
mechanisms are designed to protect you from injury or death.
Do maintain and keep your gun clean. Keep in a dry place away from other
metals and water. If your gun shows sign of corrosion or improper operation,
have it serviced by a competent gunsmith.
Keep the muzzle pointed in a...

USED FIREARMS - lf you got your European American Armory firearm as a used
gun, BEFORE USING IT you should unload it and check all its functions to be
sure it works correctly. Firearms are some times altered to work incorrectly, or
parts may be removed, lost or replaced with incorrect parts. First, unload it and
check it yourself and then take it to a good gunsmith who knows European
American Armory firearms, and have him examine it.
WRITE US concerning any items or circumstances which you don’t...

2. HOW TO LOAD AND UNLOAD
When loading, use two hands to control the revolver so it does not fall from your
grasp. Push the cylinder latch forward with the thumb of one hand, and with your
other hand push on the right side of the cylinder. It will swing out of the frame to
the left.
With the barrel pointing down, load the chambers. Then keep your finger off the
trigger, push the cylinder back into the frame with your hand and press firmly until
you feel it latch into place.
THE REVOLVER IS NOW LOADED AND...

SINGLE ACTION FIRING (NOT FOR BOBBED HAMMER)
WARNING: When cocking the hammer, have a firm hold
on the grip with the shooting hand.
DO NOT TOUCH THE
TRIGGER WHILE COCKING THE HAMMER. TOUCH THE
TRIGGER ONLY WHEN YOU ARE READY TO FIRE.
COCKED FOR FIRING
COCKING - Place the fore portion of the thumb firmly onSINQLE ACTION
the hammer spur and pull the hammer fully to the rear
until it stops. Then, permit the hammer to move very slightly forward until the
trigger engages the hammer at full cock.
FIRING 
-...

Parts list for ENR revolverla
Banei Y (not available)34Firing pin plate1 bBarrel 4” (not avaiiab4)35set-pin for grip
2set screw3mmdii.xlQmm3Hammer36set-pin for grip4 sear2.5 mm dia. x 17.5 mm
5Sear pin36 setscrewforgrip5a searspring3Qa Smaiigrtpforn
6Hammer bushing3QbSmall grip (wood) for Y7Maim spring guide3Qc Standardgripfor4”6Main spring3QdStandard grip (wood) for 4”9Main spring seat41Grip frame with trigger guard.10 Trigger42Fmme(notavaHable)11Trigger set pin54 crane2 mm dia. x 9.5 mm59Firing pin...