European American Armory Air Rifle Mp651k Instruction Manual

MP651K
AIR PISTOL/
RIFLE
INSTRUCTION
MANUALEuropean American Armory Corp.
3855 North U.S. Highway One
Cocoa, Florida 32927
(407) 639-4842
www.eaacorp.com
E-mail: [email protected]
© Copyright EAA Corp. 11/98 

EAA MODEL: MP651K
AIR PISTOL / RIFLE
INSTRUCTION MANUAL
WARNING AND INSTRUCTION MANUAL
PLEASE READ THESE INSTRUCTIONS
CAUTION: Air Pistol / Rifles are not toys.  This Air Pistol / Rifle is recommended
for adult use.  Misuse or careless use may cause serious injury or death. This
Air Pistol / Rifle is dangerous within 500 yards.
Do NOT pressurize or handle your Air Pistol / Rifle before you read and under-
stand the instructions and warnings contained in this manual.
FOR YOUR SAFETY AND THE SAFETY OF...

10 LIFE SAVING WARNINGS:
1.  Thinking the air Pistol / Rifle is unloaded does not mean it is unloaded.  If a
Pellet or BB is in the chamber and the Pistol / Rifle has pressurized CO2 car-
tridge, this Pistol / Rifle can be fired.  Always treat your air Pistol / Rifle as if it is
loaded.
2. Always point the muzzle of any air Pistol / Rifle in a safe direction whether
the Pistol / Rifle is loaded or unloaded...
3. No hands over the muzzle / no way / no time / no how.
4. Only use lead .177 pellets or 4.5mm...

grip may cause poor accuracy. Do not over tighten the grip screw.  Make sure
that the grip is tight to the receiver of the air Pistol / Rifle.
4. The Barrel of your air Pistol / Rifle is made of steel and has groove rifling.
Never put the barrel in a position where it could be bent or damaged. A bent
barrel will lead to accuracy problems or could even lead to a Pellet or BB being
stuck in the barrel.  After shooting, always clean the barrel with
a light oil.
5. The Sights on your air Pistol / Rifle are...

CHARGING/ PRESSURIZING YOUR AIR PISTOL / RIFLE:A. Make sure that the air Pistol / Rifle is pointed in a safe
direction and the trigger safety is on (trigger blocked). Remove
the pistol grip or stock ( see above grip or stock info). (SEE
Figure 2)
B. Warning: Before you preform this step make sure that if
there is a CO2 cylinder in the frame that all the pressure
has been released. At the bottom of the grip you will find a
sling swivel. Turn the swivel counter clock wise slowly (make
sure that the...

cylinder make sure the pellet skirts are flush with the ratchet side of the cylinder.
Now  reinstall the cylinder by pulling the Pellet Cylinder Base Pin Release and
insert the cylinder into the cylinder slot and release the Pellet Cylinder Base
Pin Release. Make sure that the Pellet Cylinder Base Pin moved into the center
of the cylinder.  (See Fig E)
FIRING THE AIR PISTOL / RIFLE:
After completing the above loading step make sure that the Pistol / Rifle is
pointed at what you intend to shoot, disengage...

Never leave a air Pistol / Rifle unattended or where it could fall and fire.
If an air Pistol / Rifle is hit sharply or dropped, damage to the internal precision
mechanism may result and consequently an accidental firing.
Store air Pistol / Rifles and Pellets or BBs separately beyond the reach of
children.  Make sure the air Pistol / Rifle and lead Pellets or BBs are properly
locked and secured so children and un- trained individuals will be denied
access.
Test your air Pistol / Rifle’s operation ONLY at...

Use only the correct size lead Pellets or BBs for your air Pistol / Rifle.  Do NOT
use steel shot or darts.
Teach children NOT to touch an air Pistol / Rifle or Pellets or BBs.
Remember an air Pistol / Rifle has the capability of taking your life or the life of
someone else.  Be careful with your air Pistol / Rifle -- an accident is almost
always the result of not following basic safety rules.
WRITE US concerning any items or circumstances which you don’t understand
and which might relate to your safety...

W A R N I N G
Altering or modifying parts is dangerous and will void the warranty.  This
air Pistol / Rifle was manufactured to perform properly with the original parts
as designed.  It is your duty to make sure any parts you buy are made for this
air Pistol / Rifle and are installed correctly and that neither the replacements
nor originals are altered or changed.  Your air Pistol / Rifle is a complex precision
tool with many parts that must relate correctly to other parts in order for proper
and safe...

IZH-651K: Periscopical UnitIZH-651K: Valve Unit
1.valve bushing
2.valve
3.locking element
4.valve spring
5.O-ring
6.adapter
7.O-ringIZH-651K:   Pistol
Component Parts
and Assemblies
1.barrel jacket
2.storage tube
3.feeder spring
4.lock
5.spring
6.feeder
7.slider
8.barrel gasket
9.magazine
10.spring
11.sear
12.valve unit
13.pin
14.screw
15.rear sight
16.grip
17.grip screw
18.cover
19.trigger
20.spring
21.ball
22.safety
23.screw
24.screw
25.barrel