Epson Vs410 Users Guide

Rear

Front
Ceiling
 Rear
Ceiling
 Wherever
yousetupthe projector, makesuretoposition itsquarely infront ofthe center ofthe screen,
 not
atan angle, ifpossible.
 If
you project fromtheceiling orfrom therear, besure toselect thecorrect Projection optioninthe
 projectors
menusystem.
 Parent
topic:Projector Placement
 21    

Related
references
 Projector
SetupSettings -Extended Menu
 Projection
Distance
 The
distance atwhich youplace theprojector fromthescreen determines theapproximate sizeofthe
 image.
Theimage sizeincreases thefarther theprojector isfrom thescreen, butcan vary depending on
 the
zoom factor, aspect ratio,andother settings.
 Use
thetables heretodetermine approximately howfartoplace theprojector fromthescreen basedon
 the
size ofthe projected image.(Conversion figuresmayhave been rounded upordown.)
 VS410...

Screen
or
 Projection
distance
 image
size
 Wide
toTele
 1
 50
inches
 58.7
to95.7 inches (149to243 cm)
 2
 80
inches
 94
to153.5 inches (239to390 cm)
 3
 100
inches
 118.1
to192.1 inches (300to488 cm)
 4
 150
inches
 177.6
to288.6 inches (451to733 cm)
 Parent
topic:Projector Placement
 Projector
Connections
 You
canconnect theprojector toavariety ofcomputer, video,andaudio sources todisplay
 presentations,
movies,orother images, withorwithout sound.
 •
Connect anytype ofcomputer thathasaUSB...

Connecting
toaComputer forSound
 Parent
topic:Projector Connections
 Connecting
toaComputer forUSB Video andAudio
 If
your computer meetsthesystem requirements, youcansend video andaudio output tothe projector
 through
thecomputers USBport(preferably USB2.0).Connect theprojector toyour computer usinga
 USB
cable.
 1.
Inthe projectors Extendedmenu,setthe USB Type Bsetting toUSB Display .
 2.
Turn onyour computer.
 3.
Connect thecable toyour projectors USBTypeB port.
 4.
Connect theother endtoany...

Related
references
 Projector
SetupSettings -Extended Menu
 USB
Display System Requirements
 Connecting
toaComputer forVGA Video
 You
canconnect theprojector toyour computer usingaVGA computer cable.
 Note:
Toconnect aMac thatincludes onlyaMini DisplayPort orMini-DVI portforvideo output, youneed
 to
obtain anadapter thatallows youtoconnect tothe projectors VGAvideo port.Contact Applefor
 compatible
adapteroptions.
 1.
Ifnecessary, disconnectyourcomputers monitorcable.
 2.
Connect theVGA computer...

1.
Connect theUSB cable toyour projectors USBTypeB port.
 2.
Connect theother endtoany available USBportonyour computer.
 3.
Ifnecessary, configureyourcomputer towork withanexternal USBmouse. Seeyour computer
 documentation
fordetails.
 Parent
topic:Connecting toComputer Sources
 Related
references
 Projector
SetupSettings -Extended Menu
 Projector
Parts-Remote Control
 Related
tasks
 Using
theRemote ControlasaWireless Mouse
 Connecting
toaComputer forSound
 If
your computer presentation...

Parent
topic:Connecting toComputer Sources
 Connecting
toVideo Sources
 Follow
theinstructions inthese sections toconnect videodevices tothe projector.
 Connecting
toaComponent-to-VGA VideoSource
 Connecting
toaComposite VideoSource
 Connecting
toan S-Video VideoSource
 Connecting
toaVideo Source forSound
 Parent
topic:Projector Connections
 Connecting
toaComponent-to-VGA VideoSource
 If
your video source hascomponent videoports, youcanconnect itto the projector usingacomponent-
 to-VGA
videocable....

Connecting
toaComposite VideoSource
 If
your video source hasacomposite videoport,youcanconnect itto the projector usinganoptional
 RCA-style
videoorA/V cable.
 1.
Connect thecable withtheyellow connector toyour video sources yellowvideooutput port.
 2.
Connect theother endtothe projectors Videoport.
 Parent
topic:Connecting toVideo Sources
 Connecting
toan S-Video VideoSource
 If
your video source hasanS-Video port,youcanconnect itto the projector usinganoptional S-Video
 cable.

1.
Connect theS-Video...

1.
Connect theaudio cabletoyour video sources audio-out ports.
 2.
Connect theother endofthe cable tothe projectors Audioports.
 Parent
topic:Connecting toVideo Sources
 Related
references
 Projector
SetupSettings -Extended Menu
 Installing
Batteriesinthe Remote Control
 The
remote controlusesthetwo AAbatteries thatcame withtheprojector.
 1.
Open thebattery coverasshown.
 29   

2.
Insert thebatteries withthe+and –ends facing asshown.
 3.
Close thebattery coverandpress itdown untilitclicks intoplace.
 Parent
topic:Setting Upthe Projector
 30