Epson V600 Manual

(None) OffThe  scanner  is off.
Top
Buttons
Before using the  scanner  buttons, make sure you  have  installed Epson  Scan.Button Function
 StartEpson  Scan  starts.
 CopyCopy  Utility  starts.
 E -mail
Epson  Scan  automatically  scans, then the  Send  File  Via E -mail  window appears.
 PDF The  Scan  to  PDF  window appears.
See  Using the  Scanner Buttons .
Top 

Home > Placing Originals on  the Scanner
Placing Documents or Photos
Placing  Documents  or  Photos on  the  Document  Table
Placing  Large  or  Thick  Documents
Caution:
Do not  place  heavy  objects  on  the  document table glass  and do  not  press the  glass  with  too  much force.
Placing Documents or Photos on the Document Table
Open  the  scanner  cover.
Make  sure the  document mat is installed inside  the  cover.  If it is not  installed, see  Replacing  the  Document  Mat  for
instructions.
a....

Note:
If you  are  scanning  multiple  photos at once,  position  each photo at least 20 mm  (0.8 inch)  apart  from the
others.
Close the  scanner  cover  gently  so  that  your original  does  not  move.
Note: Always keep  the  document table clean.
Do not  leave photos on  the  document table for an  extended period  of time  as  they  may stick  to  the
glass. 

To  start  scanning,  see  Starting  Epson  Scan for instructions.
Top
Placing Large or Thick Documents
When you  scan a  large  or  thick  document,  you  can pull  the  scanner  cover  straight up.
Place a  large  or  thick  document on  the  document table.
Close the  document cover  and hold  it down firmly as  you  scan.
Top 

Home > Placing Originals on  the Scanner
Placing Film  or Slides
Removing the  Document  Mat
Placing  Film in  the  Holder
Placing  Slides in  the  Holder
Replacing  the  Document  Mat
Removing the Document Mat
To  scan film strips or  slides, you  need  to  remove the  document mat from the  scanner  cover.  This  uncovers  the  transparency
unit  window so  your scanner  can use it to  scan your film or  slides.
Open  the  scanner  cover  and gently  slide up the  document mat to  remove it.
Use  a...

a. transparency unit  window
To  place  film for scanning,  see  Placing  Film in  the  Holder .
To  place  slides  for scanning,  see  Placing  Slides in  the  Holder .
To  replace  the  document mat,  see  Replacing  the  Document  Mat .
Top
Placing Film in the Holder
Placing 35  mm  Film Strips
Open  the  cover  of the  35 mm  film strip  holder.
Slide one  or  two  film strips all  the  way  into  the  film holder with  the  shiny base  side  facing  down.  Your images and any
wording  on  the  film...

Note:Hold the  edge  of the  film gently  or  use gloves  to  touch the  film;  otherwise you  may damage  the  film.
Make  sure the  white  stickers  on  the  back  of the  film holder and the  areas  around  them are  not
scratched, dusty,  or  covered in  any  way. If the  areas  are  obscured,  the  scanner  may have  trouble
recognizing  your film in  Full Auto  Mode.
Do not  cover  the  small  holes  in  the  film holder.
Make  sure the  film strip  is placed  as  shown.
Close the  cover  and press...

Make  sure you  removed  the  document mat.  See Removing the  Document  Mat.
Close the  scanner  cover.
To  scan your film,  see  Starting  Epson  Scan .
When you  are  finished  scanning  film,  be  sure to  replace  the  document mat before scanning  documents or  photos.  See
Replacing  the  Document  Mat .
Placing Medium  Format  Film
Open  the  cover  on  the  medium format film holder.
Slide one  medium format film image into  the  film holder with  the  shiny base  side  facing  down.  Your image...

Make  sure the  film strip  is placed  as  shown.
Close the  cover  over  the  film and press it down until  it clicks. Then press down on  all  the  edges of the  cover  to  secure it.
Place the  film holder on  the  document table so  that  it is aligned  with  the  upper  left  corner. Make  sure the  tab  labelled
“B”  on  the  film holder fits  into  the  area  labelled “B”  on  the  scanner.
Make  sure you  removed  the  document mat.  See Removing the  Document  Mat.
Close the  scanner  cover. 

Note:
You cannot use Full Auto  Mode to  scan medium format film.
When you  are  finished  scanning  film,  be  sure to  replace  the  document mat before scanning  documents or  photos.  See
Replacing  the  Document  Mat .
Using the  scanning  support  sheet
When the  film is curled,  flatten  the  film using the  scanning  support  sheet  that  came with  the  medium format film holder.
Caution:
Keep  at least 2  mm  space between the  image frame  and scanning  support  sheet.
Make  sure that  the...