Epson Stylus Pro 7400 User Manual

Printing with Mac OS X191
3
3
3
3
3
3
3
3
3
3
3
3
English
EPSON StatusMonitor
This utility provides you with printer status information, such as 
the amount of remaining ink.
Nozzle Check
This utility checks the print head nozzles for clogging. Check the 
nozzles when you notice the print quality has declined and after 
cleaning to confirm that the print head nozzles have been cleared. 
See “Checking the print head nozzles” on page 192.
If you click Auto in the Nozzle Check dialog, or turn on AUTO...

192Printing with Mac OS X
Print Head Alignment
This utility can be used to improve the print quality of your 
printed data. The alignment of the print head may need to be 
adjusted if vertical lines appear out of alignment or if white or 
black banding noise appear in your printed data. Use this utility 
to realign the print head. See “Aligning the print head” on page 
195.
EPSON LFP Remote Panel
This utility lets you optimize your printer. See “Starting EPSON 
LFP Remote Panel” on page 195. 
Print...

Printing with Mac OS X193
3
3
3
3
3
3
3
3
3
3
3
3
English
3. Click Print if you want to visually check to see if any print 
head nozzles are clogged, if you are using non-Epson special 
media, or if the width of paper you are using is less than 
210 mm. Click Auto if you want to perform an automatic 
nozzle check, and if the nozzle check indicates it is necessary.
Note:
If you turn on AUTO CLEANING from the control panel on the printer 
even though Print has been selected, the Nozzle Check utility not...

194Printing with Mac OS X
Cleaning the print head
If you find that the printed data is unexpectedly faint or dots in 
the printed data are missing, you may be able to solve these 
problems by using the Head Cleaning utility to clean the print 
head, which ensures that the nozzles are delivering ink properly.
To use the Head Cleaning utility, follow the steps below.
Note:
❏Do not start the Head Cleaning utility while printing is in progress; 
otherwise, your printout may be marred.
❏To save ink, use the...

Printing with Mac OS X195
3
3
3
3
3
3
3
3
3
3
3
3
English
❏Replace some of ink cartridges as they may be old or 
damaged.
If the print quality remains a problem after you have tried these 
solutions, contact your dealer. See “Contacting Customer 
Support” on page 352.
Aligning the print head
If you find misaligned lines or black or white banding on the 
printed data, you may be able to solve these problems by using 
the Print Head Alignment utility to align the print head. 
To use the Print Head...

196Printing with Mac OS X
Using the Print Assistant function
You can access the following information by clicking the Print 
Assistant button:
❏Reference Guide (Troubleshooting page)
❏Paper information that is most suitable for the printing
❏Technical Support Web Site
Getting Information Through Online Help
Your printer software has extensive online help, which provides 
you with instructions on printing, making printer driver settings, 
and using the printer utilities.
To access the online help, follow...

Printing with Mac OS X197
3
3
3
3
3
3
3
3
3
3
3
3
English
3. Double-click the Printer Driver folder.
4. Double-click the SPro9800_xxx, SPro9400_xxx, 
SPro7800_xxx, or SPro7400_xxx icon.
5. If the Authenticate dialog appears, enter the password or 
phrase and then click OK.
6. Click Continue.
7. Select Uninstall from the pull-down menu at the top left, and 
click the Uninstall button at the bottom right.
 

198The Control Panel
Chapter 4
The Control Panel
Buttons, Lights, Messages, and Icons
The control panel of the printer consists of 7 buttons, 4 lights, and 
a liquid crystal display (LCD). 
Buttons 
This section describes the functions of the buttons on the control 
panel.
Button Description
1 Power button  Turns the printer on or off. 
2 Pause button  Stops printing temporarily.
Restarts printing if pressed when the printer is in 
the pause mode.
The printer returns to the READY state when this 
button...

The Control Panel199
4
4
4
4
4
4
4
4
4
4
4
4
English
3 Menu button rEnters the Menu mode when pressed in the 
READY state. When pressed in the Menu mode, 
a desired menu can be selected.
Enters PRINTER STATUS menu if pressed during 
printing.
Cleans the print head if pressed and held for 3 
seconds.
4Paper Source 
button lSelects a paper source (Roll Auto Cut On   
/Roll Auto Cut Off  /Sheet  )
Returns to the previous level when pressed in 
the Menu mode.
Enters the cutter replacement mode if pressed...

200The Control Panel
Lights
This section describes the functions of the lights on the control 
panel.
The lights let you know the status of the printer and the type of 
an error when it occurs.
7 Enter button    Executes the item if the selected item is for 
execution only.
When Sheet   is selected, this button ejects 
the cut sheet if pressed and held for 3 seconds.
When Roll Auto Cut On   is selected, this 
button cuts the paper automatically if pressed 
and held for 3 seconds.
When Roll Auto Cut Off...