Epson Stylus Pro 4400 User Manual

Printing with Mac OS 9.x131
2
2
2
2
2
2
2
2
2
2
2
2
English
3. Click Preview. The Preview dialog appears, and displays a 
preview of your data.
The Preview dialog contains several icon buttons that you can 
use to perform the following functions.
Zoom Click this button to enlarge or reduce the size 
of the previewed page.
Show/Hide 
Printable 
AreaClick this button to display or hide the 
borderlines which indicate the printable area. 
The printer cannot print anything which is 
outside of this area.
Add...

132Printing with Mac OS 9.x 4. If you are satisfied with the previewed data, click Print. If you 
are not satisfied with the appearance of the data, click 
Cancel. The Preview and Print dialogs close with the current 
print settings preserved. Open the Print dialog again to make 
additional changes to the print settings.
Making Settings in the Page Setup Dialog
You can make the Paper Size, Paper Source, Borderless, Auto Cut, 
Orientation, Reduce or Enlarge, Printable Area, and Roll Paper 
Option settings...

Printing with Mac OS 9.x133
2
2
2
2
2
2
2
2
2
2
2
2
English
1. Click Customize. The following dialog appears.
2. To define a new paper size, click New.
3. Type a unique name for the paper size in the paper size list.
4. Specify the measurement unit as either cm or inch.
5. Enter the width and height of your paper by typing the text 
in the appropriate text boxes.
Note:
The maximum paper height is 44 inches (111.76 cm).
6. Specify the margins by typing in the Margin text boxes or by 
manipulating the...

134Printing with Mac OS 9.x
Making the Borderless setting
You can print your data without margins on paper. 
For this printing mode, Epson recommends the following media 
conditions.
Accommodate media width:
Note:
❏You cannot perform borderless printing on cut-sheet media with a 
width of 420 mm (A2).
❏When printing on roll paper with a width of 8 inches (203.2 inch) 
or 420 mm (A2), attach the spacer to the spindle. See “Attaching 
the spacer to the spindle” on page 260.
❏If your application has margin...

Printing with Mac OS 9.x135
2
2
2
2
2
2
2
2
2
2
2
2
English
❏Printing with this feature takes longer time than normal printing.
❏Only Plain Paper and Plain Paper (line drawing) can set the bottom 
margin to 3 mm. When printing on the other media, the bottom 
margin is always 14 mm.
❏When Premium Glossy Photo Paper (250) roll paper or Premium 
Semigloss Photo Paper (250) roll paper is used in printing, the top 
margin is always 20 mm.
❏Smear may result in the top and bottom areas depending on the 
media....

136Printing with Mac OS 9.x 3. Choose Auto Expand or Retain Size from the pull-down 
menu.
4. Make the Auto Cut setting. See “Making the Auto Cut setting” 
on page 137.
5. Click OK.
Auto ExpandSelect this setting if you want to enlarge the size of 
print data automatically and print with no margins. 
You can choose the amount of enlargement by 
moving the slider.
Note:
Enlarged areas that exceed the paper size will not 
be printed on the paper.
Retain SizeSelect this setting if you do not want to change...

Printing with Mac OS 9.x137
2
2
2
2
2
2
2
2
2
2
2
2
English
6. Start printing your data from your application.
Making the Auto Cut setting
This setting is available only when Roll Paper or Roll Paper 
(Banner) is selected as the Paper Source setting. You can select 
how the paper is cut after printing. 
Single Cut
Select this setting if you want to save paper. 
If you select this setting, the boundary of a picture or the boundary 
of a page is cut. However, the cut position may shift slightly.
Note:...

138Printing with Mac OS 9.x
Double Cut
Select this setting to avoid the slight gap that occurs with the 
Single Cut setting. A margin is created between pictures, and 
1 mm along the inside of each picture is cut.
Note:
This setting appears only when the Borderless check box is selected.
Normal Cut
Select this setting to keep margins at the top and bottom of the 
printed data.
 

Printing with Mac OS 9.x139
2
2
2
2
2
2
2
2
2
2
2
2
English
Off
Select this setting to cut printouts manually. To cut printouts 
manually, follow the steps below.
1. Press the Paper Feed  or Paper Feed  button, and then 
match the cutting position with the scissors mark on the left 
side of the print head.
2. Press the Paper Source  button to select Auto Cut On . 
3. Press and hold the Paper Source  button for 3 seconds. The 
paper cutter cuts the printout at the cutting position.
 

140Printing with Mac OS 9.x
Making the Orientation setting
You can specify the direction of printing on the page.
Making Double-sided Printing setting
You can perform double-sided printing. There are two types of 
double-sided printing available. Standard double-sided printing 
allows you to print the odd-numbered pages first. Once these 
pages are printed, the paper can then be reloaded for printing the 
even-numbered pages onto the opposite side of the paper. 
PortraitPrint direction is short edge...