Epson Stylus Pro 3800 User Manual

11
Introduction|11
Options and Supplies
Your Epson Stylus® Pro 3800 offers these optional upgrades and supplies:
You can purchase genuine Epson
® ink and paper from an authorized Epson 
reseller. To find the nearest reseller, call 800-GO-EPSON (800-463-7766). 
Or you can purchase online at www.epsonstore.com (U.S. sales) or 
www.epson.ca (Canadian sales). 
OptionProduct code
One-year extended warranty EPP38B1 
Two-year extended warranty EPP38B2 
Replacement Ink Maintenance Cartridge  T582000
Ink...

12
12|Introduction
Where To Get Help
Epson provides technical support and information on the installation, 
configuration, and operation of professional printing products through the 
Epson Preferred Protection Plan. Dial (888) 377-6611, 6
AM to 6PM, 
Pacific Time, Monday through Friday. Support hours and days are subject 
to change without notice. 
Before you call, make sure you have your Unit ID number, which is 
included with the Epson Preferred Protection Plan information that came 
with your...

13
Introduction|13

If you use a stand for the printer, make sure it can support at least 43 lb 
(20 kg)
Use only the type of power source indicated on the label.
Use only the power cord that comes with the printer. Use of another 
cord may result in fire or electric shock.
The printer’s power cord is designed for use with the printer only. Using 
it with other equipment may result in fire or electric shock.
Do not use a damaged or frayed power cord.
If you use an extension cord with the printer, make...

14
14|Introduction
Ink Cartridge Safety Instructions
Keep ink cartridges out of the reach of children and do not drink the 
ink.
Store ink cartridges in a cool, dark place.
If ink gets on your skin, wash it off with soap and water. If ink gets in 
your eyes, flush them immediately with water.
Shake an ink cartridge well before installing it for best results. 
Do not use an ink cartridge beyond the date printed on the cartridge 
carton.
Use up the ink cartridge within six months of installation for best...

15
15
If you are using the printer on a network, follow the instructions in this 
chapter to:
Connect the printer to the network
Configure the network interface
Install the printer software
To connect the printer directly to your computer’s USB port, see the 
Start Here sheet.
Connecting to the Network
Make sure you have the correct cable for connecting the printer. To connect 
to a network switch or hub, you need a standard RJ-45 “straight-through” 
network cable. To connect directly to your computer’s...

1-16
16|Setting Up the Printer On a Network
Configuring the Network Interface
1. Make sure that the printer is turned on and the LCD displays READY.
2. Press the 
Menu r button on the printer’s control panel to enter the 
printer’s menu system.
3. Press d to highlight 
NETWORK SETUP, then press r.
4. Press r then d to highlight 
ENABLE.
5. Press   Enter. An asterisk appears next to ENABLE to show that it’s 
selected.
6. Press l then d to highlight 
IP ADDRESS SETTING.
7. Press r and then u or d to choose...

1-17
Setting Up the Printer On a Network|17
12. Press u or d to change each octet value, then press r to select the next 
octet. When you have changed the value of the last octet, press 
r. The 
LCD displays the 
DEFAULT GATEWAY.
13. Press u or d to change each octet value, then press r to select the next 
octet. When you have changed the value of the last octet, press   Enter, 
then press the 
+Cancel button to exit the printer menu.
14. Turn the printer off then back on again.
15. Make sure that the...

1-18
18|Setting Up the Printer On a Network
4. Double-click User’s Guide and Network Guide and wait while the 
guides are installed. 
5. Double-click 
Stylus Pro 3800 Driver. 
6. Enter your password and follow the on-screen instructions to install 
your software.
7. Enter your password again and follow the on-screen instructions to 
install the EPSON LFP Remote Panel.
8. Enter your password again and follow the on-screen instructions to 
install EpsonNet Config.
9. Restart your Macintosh when prompted....

1-19
Setting Up the Printer On a Network|19
Adding the Printer in Mac OS X 10.4.x
1. Open the Applications folder, then open the Utilities folder and start 
the 
Printer Setup Utility.
2. If you see a message like this, click 
Add, then skip to step 4. 
3. Click the 
Add icon at the top of the Printer List window.
sp3800Guide.book  Page 19  Monday, January 29, 2007  11:08 AM
 

1-20
20|Setting Up the Printer On a Network
You see your printer in the Printer Browser:
4. Select your printer, then wait while your Macintosh finds the printer 
driver and the 
Add button becomes available. Then click the Add 
button. 
Your printer appears in the Printer List window.
5. Close the Printer Setup Utility.
Adding the Printer in Mac OS X 10.3.9
1. Open the Applications folder, then open the Utilities folder and start 
the 
Printer Setup Utility.
2. If you see a message like this, click...