Epson Stylus Photo R3000 User Manual
Have a look at the manual Epson Stylus Photo R3000 User Manual online for free. It’s possible to download the document as PDF or print. UserManuals.tech offer 1734 Epson manuals and user’s guides for free. Share the user manual or guide on Facebook, Twitter or Google+.
Caution: Don’t remove any other seals or the cartridges may leak. 4 Insert the cartridges in the holder for each color. 5 Press the cartridges down until they click. 6 Close the cartridge cover, then close the printer cover. 7 The printer begins priming the ink delivery system. This takes about 10 minutes. Do not turn off the printer, load paper, or open any covers until the process is complete. Caution: Don’t turn off the printer while it is priming or you’ll waste ink. Unpack Caution: Do not open ink cartridge packages until you are ready to install the ink. Cartridges are vacuum packed to maintain reliability. 1 Remove all protective materials. 2 Open the top cover and remove any tape inside. 3 Open the front cover and remove the transportation lock. Tip: Keep the transportation lock in the accessories box. You can also use the accessories box to store your printer manual and spare ink cartridges. 1 Turn on 1 Connect the power cable. Caution: Do not connect to your computer yet. 2 Press the power button. 3 Select your language. (Press OK for English.) To change the language, press or to select it, then press OK. 2 *412036900**412036900* 3 3 Load paper against the right edge and behind the tab. Then press the button on the edge guide and slide it to the edge of the paper. Note: Don’t load the paper sideways. Always load it short edge rst. Front manual feed tray You can print on these fine art media using the front manual feed tray: Epson Velvet Fine Art Paper Epson Watercolor Paper Radiant White Epson UltraSmooth® Fine Art Paper Epson Exhibition Fiber Paper Epson Hot Press Bright Epson Hot Press Natural Epson Cold Press Bright Epson Cold Press Natural PremierArt™ Matte Scrapbook Photo Paper for Epson Note: For instructions on loading roll paper, a CD or DVD, or thick media, see the printed Basics guide. 1 Remove any paper from the sheet feeder. 2 Open the rear support. 3 Fully extend the rear support. 4 Open the front cover, then push the center of the manual feed tray to extend it. 5 Insert a single sheet of fine art media. Insert it short end first with the printable side face up. 4120369 Rev.0 1-F C 4120369 Rev.0 1-F M 4120369 Rev.0 1-F Y 4120369 Rev.0 1-F K Start Here Epson Stylus ® Photo R3000 Read these instructions before using your product. 4 Load paper Sheet feeder You can load plain paper, and most glossy and matte papers, in the sheet feeder. 1 Open the paper support and pull up the extensions. 2 Open the front cover, then extend the output tray. Install ink cartridges 1 Open the printer cover, then open the ink cartridge cover. 2 Shake the ink cartridges gently 4 or 5 times, then unpack them. 3 Remove only the yellow tape from each cartridge.
Caution: Don’t remove any other seals or the cartridges may leak. 4 Insert the cartridges in the holder for each color. 5 Press the cartridges down until they click. 6 Close the cartridge cover, then close the printer cover. 7 The printer begins priming the ink delivery system. This takes about 10 minutes. Do not turn off the printer, load paper, or open any covers until the process is complete. Caution: Don’t turn off the printer while it is priming or you’ll waste ink. Unpack Caution: Do not open ink cartridge packages until you are ready to install the ink. Cartridges are vacuum packed to maintain reliability. 1 Remove all protective materials. 2 Open the top cover and remove any tape inside. 3 Open the front cover and remove the transportation lock. Tip: Keep the transportation lock in the accessories box. You can also use the accessories box to store your printer manual and spare ink cartridges. 1 Turn on 1 Connect the power cable. Caution: Do not connect to your computer yet. 2 Press the power button. 3 Select your language. (Press OK for English.) To change the language, press or to select it, then press OK. 2 *412036900**412036900* 3 3 Load paper against the right edge and behind the tab. Then press the button on the edge guide and slide it to the edge of the paper. Note: Don’t load the paper sideways. Always load it short edge rst. Front manual feed tray You can print on these fine art media using the front manual feed tray: Epson Velvet Fine Art Paper Epson Watercolor Paper Radiant White Epson UltraSmooth® Fine Art Paper Epson Exhibition Fiber Paper Epson Hot Press Bright Epson Hot Press Natural Epson Cold Press Bright Epson Cold Press Natural PremierArt™ Matte Scrapbook Photo Paper for Epson Note: For instructions on loading roll paper, a CD or DVD, or thick media, see the printed Basics guide. 1 Remove any paper from the sheet feeder. 2 Open the rear support. 3 Fully extend the rear support. 4 Open the front cover, then push the center of the manual feed tray to extend it. 5 Insert a single sheet of fine art media. Insert it short end first with the printable side face up. 4120369 Rev.0 1-F C 4120369 Rev.0 1-F M 4120369 Rev.0 1-F Y 4120369 Rev.0 1-F K Start Here Epson Stylus ® Photo R3000 Read these instructions before using your product. 4 Load paper Sheet feeder You can load plain paper, and most glossy and matte papers, in the sheet feeder. 1 Open the paper support and pull up the extensions. 2 Open the front cover, then extend the output tray. Install ink cartridges 1 Open the printer cover, then open the ink cartridge cover. 2 Shake the ink cartridges gently 4 or 5 times, then unpack them. 3 Remove only the yellow tape from each cartridge.
6 Feed the paper up to the line on the tray. Make sure the paper is flush against the right. 7 Press the OK button. The paper loads inside the printer. 8 When you see a message on the screen, close the manual feed tray. Push it in until it latches. 9 Extend the output tray. 4120369 Rev.0 1-B C 4120369 Rev.0 1-B M 4120369 Rev.0 1-B Y 4120369 Rev.0 1-B K Need paper and ink? Try Epson paper with Epson UltraChrome K3® ink for professional results. For the right supplies at the right time, you can purchase them at Epson Supplies Central at www.epson.com/ink3 (U.S. sales) or www.epson.ca (Canadian sales). You can also purchase supplies from an Epson authorized reseller. To nd the nearest one, call 800-GO-EPSON (800-463-7766). Genuine Epson Paper Epson offers a wide variety of papers to meet your needs; visit Epson Supplies Central for more information. Ultra Premium Photo Paper Luster Instant-drying RC photo paper for vivid, lifelike images that rival those of traditional silver halide prints. Its semigloss “E” surface and 10 mil thickness provide a true photographic look and feel. Genuine Epson Inks Photo BlackPhoto Noir 15 7 ® Look for the numbers below to nd your cartridges. It’s as easy as remembering your number! Epson Stylus Photo R3000 Series Ink Cartridges Color Part number Light Light Black157 Light Black157 Photo Black157 Matte Black157 Vivid Light Magenta157 Vivid Magenta157 Light Cyan157 Cyan157 Yellow157 Install software 1 Make sure the printer is NOT CONNECTED to your computer. Windows®: If you see a Found New Hardware screen, click Cancel and disconnect the USB cable. You can’t install your software that way. 2 Insert your product CD. Windows: If you see the AutoPlay window, click Run Setup.exe. If you see the User Account Control screen, click Ye s or Continue. Macintosh®: Double-click the Epson icon. 3 Windows: Click Install and follow the on-screen instructions. Macintosh: Select the items you want to install, then click Install. Tip: Be sure to install the professional print samples. When youre done with the installation, you can test your printers output in both color and black-and-white. 6 5 Choose your connection You can connect your printer to your existing network (wireless or wired) or directly to your computer using a USB cable (not included). See below for details on each connection method. Wireless Connection (802.11n) You must install the software on every computer from which you want to print. For the first installation, we recommend using a USB cable (not included) to simplify wireless setup. After the printer is connected to the network, you will be prompted to remove the cable. If you’re using Mac OS® X 10.6 or don’t have a USB cable, you will need to use the control panel on the printer to select wireless settings. Make sure you know your network name (SSID) and network password: Network name Network password If you don’t have this information, contact the person who set up your network. Note: For optimal print speed, your wireless router and/or laptop must conform to the 802.11n standard. Earlier standards (802.11a/b/g) are not supported. Direct USB Connection Make sure you have a USB cable (not included). Do not connect the printer to your computer until you’re instructed to do so. Wired Ethernet® Connection Make sure you have an Ethernet network cable (not included). You must install the software on every computer from which you want to print. Epson, Epson Stylus, and Epson UltraChrome K3 are registered trademarks, Epson Exceed Your Vision is a registered logomark, and Supplies Central is a service mark of Seiko Epson Corporation. Signature Worthy and UltraSmooth are registered trademarks and Designed for Excellence is a trademark of Epson America, Inc. General Notice: Other product names used herein are for identifi cation purposes only and may be trademarks of their respective owners. Epson disclaims any and all rights in those marks. This information is subject to change without notice. © 2010 Epson America, Inc. 11/10 CPD-28172R1 Printed in XXXXXX Any questions? Network Setup Follow the on-screen instructions when you insert your product CD. If you need additional help, see the printed Basics guide. You can also watch a video tutorial at: epson.com/support/wireless. Basics Guide Basic instructions for loading paper, printing, maintenance, and network setup. On-screen help with your software Select Help or ? when you’re using your software. User’s Guide Click the shortcut on your desktop (or in the Applications/Epson Software/ Guide folder on Macintosh) to access the online User’s Guide, software downloads, Epson Supplies CentralSM, and more (requires an Internet connection). Epson Technical Support Visit epson.com/support/r3000 (U.S.) or epson.ca/support/r3000 (Canada) where you can download drivers, view manuals, get FAQs, or e-mail Epson. You may also speak with a support specialist by calling: U.S.: (562) 276-7272, 6 AM to 8 PM, Paci c Time, Monday through Friday, and 7 AM to 4 PM Saturday Canada: (905) 709-2567, 6 AM to 8 PM, Paci c Time, Monday through Friday Days and hours of support are subject to change without notice. Toll or long distance charges may apply. Any problems? If you experience problems during setup, see below: Network setup was unsuccessful. Make sure you select the right network name. If you see a rewall alert message, click Unblock or Allow to let setup continue. If your network has security enabled, make sure you enter your network password (WEP key or WPA passphrase) correctly. If it has uppercase (ABC) or lowercase (abc) letters, make sure you enter them correctly. Function buttons Press, ,, oron the printer to highlight a letter or function button on the screen. Press to select it. Use the function buttons to select uppercase (AB12), lowercase (ab12), symbols (!#%@), or spaces (), or to delete characters (). When you’re nished, highlight Done and press OK. The printer’s LCD screen is dark. Press any button to wake the printer from sleep mode. Setup is unable to find my printer after connecting it with a USB cable. Make sure it is securely connected as shown:
6 Feed the paper up to the line on the tray. Make sure the paper is flush against the right. 7 Press the OK button. The paper loads inside the printer. 8 When you see a message on the screen, close the manual feed tray. Push it in until it latches. 9 Extend the output tray. 4120369 Rev.0 1-B C 4120369 Rev.0 1-B M 4120369 Rev.0 1-B Y 4120369 Rev.0 1-B K Need paper and ink? Try Epson paper with Epson UltraChrome K3® ink for professional results. For the right supplies at the right time, you can purchase them at Epson Supplies Central at www.epson.com/ink3 (U.S. sales) or www.epson.ca (Canadian sales). You can also purchase supplies from an Epson authorized reseller. To nd the nearest one, call 800-GO-EPSON (800-463-7766). Genuine Epson Paper Epson offers a wide variety of papers to meet your needs; visit Epson Supplies Central for more information. Ultra Premium Photo Paper Luster Instant-drying RC photo paper for vivid, lifelike images that rival those of traditional silver halide prints. Its semigloss “E” surface and 10 mil thickness provide a true photographic look and feel. Genuine Epson Inks Photo BlackPhoto Noir 15 7 ® Look for the numbers below to nd your cartridges. It’s as easy as remembering your number! Epson Stylus Photo R3000 Series Ink Cartridges Color Part number Light Light Black157 Light Black157 Photo Black157 Matte Black157 Vivid Light Magenta157 Vivid Magenta157 Light Cyan157 Cyan157 Yellow157 Install software 1 Make sure the printer is NOT CONNECTED to your computer. Windows®: If you see a Found New Hardware screen, click Cancel and disconnect the USB cable. You can’t install your software that way. 2 Insert your product CD. Windows: If you see the AutoPlay window, click Run Setup.exe. If you see the User Account Control screen, click Ye s or Continue. Macintosh®: Double-click the Epson icon. 3 Windows: Click Install and follow the on-screen instructions. Macintosh: Select the items you want to install, then click Install. Tip: Be sure to install the professional print samples. When youre done with the installation, you can test your printers output in both color and black-and-white. 6 5 Choose your connection You can connect your printer to your existing network (wireless or wired) or directly to your computer using a USB cable (not included). See below for details on each connection method. Wireless Connection (802.11n) You must install the software on every computer from which you want to print. For the first installation, we recommend using a USB cable (not included) to simplify wireless setup. After the printer is connected to the network, you will be prompted to remove the cable. If you’re using Mac OS® X 10.6 or don’t have a USB cable, you will need to use the control panel on the printer to select wireless settings. Make sure you know your network name (SSID) and network password: Network name Network password If you don’t have this information, contact the person who set up your network. Note: For optimal print speed, your wireless router and/or laptop must conform to the 802.11n standard. Earlier standards (802.11a/b/g) are not supported. Direct USB Connection Make sure you have a USB cable (not included). Do not connect the printer to your computer until you’re instructed to do so. Wired Ethernet® Connection Make sure you have an Ethernet network cable (not included). You must install the software on every computer from which you want to print. Epson, Epson Stylus, and Epson UltraChrome K3 are registered trademarks, Epson Exceed Your Vision is a registered logomark, and Supplies Central is a service mark of Seiko Epson Corporation. Signature Worthy and UltraSmooth are registered trademarks and Designed for Excellence is a trademark of Epson America, Inc. General Notice: Other product names used herein are for identifi cation purposes only and may be trademarks of their respective owners. Epson disclaims any and all rights in those marks. This information is subject to change without notice. © 2010 Epson America, Inc. 11/10 CPD-28172R1 Printed in XXXXXX Any questions? Network Setup Follow the on-screen instructions when you insert your product CD. If you need additional help, see the printed Basics guide. You can also watch a video tutorial at: epson.com/support/wireless. Basics Guide Basic instructions for loading paper, printing, maintenance, and network setup. On-screen help with your software Select Help or ? when you’re using your software. User’s Guide Click the shortcut on your desktop (or in the Applications/Epson Software/ Guide folder on Macintosh) to access the online User’s Guide, software downloads, Epson Supplies CentralSM, and more (requires an Internet connection). Epson Technical Support Visit epson.com/support/r3000 (U.S.) or epson.ca/support/r3000 (Canada) where you can download drivers, view manuals, get FAQs, or e-mail Epson. You may also speak with a support specialist by calling: U.S.: (562) 276-7272, 6 AM to 8 PM, Paci c Time, Monday through Friday, and 7 AM to 4 PM Saturday Canada: (905) 709-2567, 6 AM to 8 PM, Paci c Time, Monday through Friday Days and hours of support are subject to change without notice. Toll or long distance charges may apply. Any problems? If you experience problems during setup, see below: Network setup was unsuccessful. Make sure you select the right network name. If you see a rewall alert message, click Unblock or Allow to let setup continue. If your network has security enabled, make sure you enter your network password (WEP key or WPA passphrase) correctly. If it has uppercase (ABC) or lowercase (abc) letters, make sure you enter them correctly. Function buttons Press, ,, oron the printer to highlight a letter or function button on the screen. Press to select it. Use the function buttons to select uppercase (AB12), lowercase (ab12), symbols (!#%@), or spaces (), or to delete characters (). When you’re nished, highlight Done and press OK. The printer’s LCD screen is dark. Press any button to wake the printer from sleep mode. Setup is unable to find my printer after connecting it with a USB cable. Make sure it is securely connected as shown: