Epson Stylus Photo 1200 User Manual

 



  10Choose one of the following options for Rendering Intent:
wPerceptual
For printing scanned photographs. Maintains the relationship 
between colors as it scales them to fit within your printer’s color 
gamut.
wSaturation
For printing graphics-intensive documents like presentation pages 
with charts and graphs. Maintains the relative saturation of colors 
from one gamut to another.
wColorimetric
For all other document types. Maintains colors that fall within the 
gamut of both your...

 



 
 
   	Follow these steps to select paper options on the Paper tab:
1Create your image or document in your application software.
2Access the printer settings dialog box as described in Printing from 
Windows
.
3Click the Paper tab. You see the Paper dialog box:
Click to select 
your Paper Size 
Printer graphic 
reflects changes 
to Orientation 
and Printable Area 
settingsPage graphics 
change to show 
Collate and 
Reverse Order 
settings
 

 



  4Click the Paper Size drop-down list to select the size of paper you 
loaded in the printer. 
The sizes marked with an asterisk (*) are larger than you can load in 
the printer and can be used only with the Reduce/Enlarge setting on 
the Layout tab; see Reducing and Enlarging Your Document Size
 for 
more information.
5If you loaded Photo Paper that you cut from a roll, select Banner as 
the Paper Source setting. See EPSON Banner Photo Paper
 for 
instructions on preparing and...

 



  6If you did not or cannot select the number of copies you want to print in 
your application program’s Print dialog box, choose the number in the 
Copies box. Don’t select the number of copies here and in your 
application’s Print dialog box; you may get twice the number of copies 
you want.
7If you’re printing multiple copies of a multi-page document and you 
want the copies printed in sets, click the Collate checkbox. The page 
graphics change to show collated documents.
8If...

 



 	 10The Standard Printable Area setting uses the maximum printable area 
of your paper with a minimum bottom margin of 0.55 inch (14 mm). To 
decrease the minimum bottom margin to 0.12 inch (3 mm), set the 
Printable Area setting to Maximum. To center your document on the 
page using either setting, select the Centered checkbox.
11Click a tab for the settings you want to check or change next, or click 
OK to print your document.

 
 
  You can create up to...

 



 
 4Type a name (up to 24 characters) for your custom paper size in the 
Paper Size Name field. Then select a Paper Width and Paper Height 
for the paper. To use centimeters instead of inches, click the 0.01cm 
option. When you’re finished, click Save. The paper size name 
appears in the Paper Size list in the dialog box. Add more sizes if you 
want, and click OK when you’re done.
5You see the Paper tab again. The paper size name you defined is 
added to the Paper Size list and...

 



 

     Follow these steps to select the Paper Size and Orientation:
1Create your image or document in your application software.
2Open the File menu and select Page Setup. You see the Page Setup 
dialog box:
3Click the Paper Size pop-up list to select the size of paper you loaded. 
If you don’t see the exact size you need, you can create a custom 
paper size; see Creating Custom Paper Sizes
.
Paper Size 
Printer graphic 
reflects changes 
to...

 



  4If you loaded Photo Paper that you cut from a roll, select Banner as 
the Paper Source setting. See EPSON Banner Photo Paper
 for 
instructions on preparing and loading roll paper. With Banner selected, 
you can’t change the Collate, Reverse Order, Rotate by 180,° or 
Printable Area settings, or any Layout settings.
5Select the direction of printing on the page with the Orientation options. 
To print your document oriented as shown in one of the following 
illustrations, select...

 



  If you’ve finished selecting options, click OK to close the Page Setup 
dialog box. Then select Print from the File menu to print your 
document.

	
 

 	 You can create up to 8 custom paper sizes and add them to the Paper 
Size list. This is useful if you’re printing a custom size document, such as 
a banner. You can select any width from 3.5 to 12.95 inches, and any 
height (length) from 3.5 to 44 inches.
1Open your application’s File menu and select Page...

 



 	 5Type a name for your paper size in the New Paper Size field, then 
click OK. The name is added to the Paper Size list and selected as the 
current setting in the Page Setup dialog box. 
6Click OK to return to the Page Setup dialog box.
   Follow these steps to use the Collate and Reverse Order options:
1Open your application program’s File menu and select Print.
2Click the  Layout icon. You see the Layout dialog box:
3If you’re printing multiple copies of...