Epson Proyector S 12 Manual

1.
Hold down theFreeze buttononthe remote controluntilyouseethePassword Protectmenu.This
 takes
about fiveseconds.
 2.
Press thedown arrow toselect Password andpress Enter.
 You
seetheprompt Change thepassword?.
 3.
Select Yesandpress Enter.
 4.
Hold down theNum button onthe remote controlandusethenumeric buttonstoset afour-digit
 password.

The
password displaysas**** asyou enter it.Then youseetheconfirmation prompt.
 5.
Enter thepassword again.
 You
seethemessage Password accepted.
 6.
Press...

Parent
topic:Password SecurityTypes
 Selecting
Password SecurityTypes
 After
setting apassword, youseethePassword Protectmenu.Selectthepassword securitytypesyou
 want
touse.
 If
you donot see thismenu, holddown theFreeze buttononthe remote controlforfive seconds untilthe
 menu
appears.
 1.
Toprevent unauthorized useofthe projector, selectPower OnProtect ,press Enter,select On,and
 press
Esc.
 2.
Toprevent changes tothe Users Logoscreen orrelated display settings, selectUsers Logo
 Protect
,press...

You
must enter thecorrect password touse theprojector.
 1.
Hold down theNum button onthe remote controlwhileyouenter thepassword usingthenumeric
 buttons.

The
password screencloses.
 2.
Ifthe password isincorrect, thefollowing mayhappen:
 •
You seeawrong password messageandaprompt totry again. Enterthecorrect password to
 proceed.

•
Ifthe password isincorrect threetimes, youseeamessage thattheprojector islocked anda
 request
code.Writedown thecode, turntheprojector off,and disconnect thepower...

displayed
requestcodeandyour proof ofpurchase information toobtain acode tounlock the
 projector.)

•
Ifthe password isincorrect 30times inarow, theprojector remainslocked.Youmust send the
 projector
toEpson forservice.
 Parent
topic:Password SecurityTypes
 Saving
aUser s Logo Image toDisplay
 You
cantransfer animage tothe projector andthen display itwhenever theprojector turnson.You can
 also
display theimage whentheprojector isnot receiving aninput signal orwhen youtemporarily stop
 projection...

6.
Select Yesandpress Enter.(If you want tochange theselected area,select No,press Enter,and
 repeat
thelast step.)
 You
seetheUsers Logozoom factor menu.
 7.
Select azoom percentage andpress Enter.
 You
seeaprompt askingifyou want tosave theimage asthe Users Logo.
 8.
Select Yesandpress Enter.
 Note:
Ittakes afew moments forthe projector tosave theimage; donot use theprojector, itsremote
 control,
orany connected equipment untilitis finished.
 You
seeacompletion message.
 9.
Press Esctoexit themessage...

Locking
theProjector s Buttons
 You
canlock thebuttons onthe projectors controlpaneltoprevent anyonefromusing theprojector. You
 can
lock allthe buttons orall the buttons exceptthepower button.
 1.
Press theMenu button.
 2.
Select theSettings menuandpress Enter.
 3.
Select theControl PanelLocksetting andpress Enter.
 4.
Select oneofthese locktypes andpress Enter:
 •
To lock allofthe projectors buttons,selectFullLock .
 •
To lock allbuttons exceptthepower button, selectPartial Lock.
 You...

Installing
aSecurity Cable
 You
caninstall twotypes ofsecurity cablesonthe projector todeter theft.
 •
Use thesecurity slotonthe back ofthe projector toattach aKensington MicrosaverSecuritysystem,
 available
fromEpson.
 •
Use thesecurity cableattachment pointonthe projector toattach awire cable andsecure itto aroom
 fixture
orheavy furniture.
 Parent
topic:Projector SecurityFeatures
 Related
references
 Projector
Parts-Rear
 77  

Adjusting
theMenu Settings
 Follow
theinstructions inthese sections toaccess theprojector menusystem andchange projector
 settings.

Using
theProjector s Menus
 Image
Quality Settings -Image Menu
 Input
Signal Settings -Signal Menu
 Projector
FeatureSettings -Settings Menu
 Projector
SetupSettings -Extended Menu
 Projector
Information Display-Info Menu
 Projector
ResetOptions -Reset Menu
 Using
theProjector s Menus
 You
canusetheprojectors menustoadjust thesettings thatcontrol howyour projector...

2.
Press theupordown arrow buttons tomove through themenus listedonthe left. The settings for
 each
menu aredisplayed onthe right.
 Note:
Theavailable settingsdependonthe current inputsource.
 3.
Tochange settings inthe displayed menu,pressEnter.
 4.
Press theupordown arrow button tomove through thesettings.
 5.
Change thesettings usingthebuttons listedonthe bottom ofthe menu screens.
 6.
Toreturn allthe menu settings totheir default values, selectReset.
 7.
When youfinish changing settingsonamenu,...

To
change settings foraninput source, makesurethesource isconnected andselect thatsource.
 Setting
 Options
 Description

Color
Mode
 See
thelistofavailable Color
 Adjusts
thevividness ofimage
 Modes
 colors
forvarious imagetypes
 and
environments
 Brightness
 Varying
levelsavailable
 Lightens
ordarkens theoverall
 image

Contrast
 Varying
levelsavailable
 Adjusts
thedifference between
 light
anddark areas ofthe image
 Color
Saturation
 Varying
levelsavailable
 Adjusts
theintensity ofthe image
 colors...