Epson Projector Pro G7905U User Manual
Have a look at the manual Epson Projector Pro G7905U User Manual online for free. It’s possible to download the document as PDF or print. UserManuals.tech offer 1734 Epson manuals and user’s guides for free. Share the user manual or guide on Facebook, Twitter or Google+.
111 10. Adjust theprojectors positionanduselens shifttocenter theimage overthepoint where thetwo surfaces meet.(Therestofthese stepsshowHorizontal Cornerasthe selected CornerTypebutthe steps arethesame forVertical Corner.) Note: Youcanpress Enter toshow orhide theimage andgridtocheck theresults.
112 11. Use thearrow buttons onthe projector orthe remote controltoselect thearea youwant toadjust. Then press Enter. • For horizontal corners,adjustthetoparea using thelowest point(indicated bythe blue arrow) as your reference. Adjustthelower areausing thehighest point(indicated bythe pink arrow) asyour reference. • For vertical corners, adjusttheleftand right areas usingthepoints nearest thecenter ofthe image as your reference points.
113 Note: Toreset youradjustments, pressandhold theEsc button foratleast 2seconds todisplay a reset screen. Thenselect Yes. 12. Press andhold thearrow buttons onthe projector orremote controltoadjust theimage shape. 13. Repeat theprevious twosteps asnecessary toadjust otherimage areas. If the image expands orcontracts, continuewiththenext steptoadjust thelinearity. 14. Press theEsc button toreturn tothe Corner Wallscreen. 15. Select theLinearity settingandpress Enter. 16. Adjust thelinearity bydoing thefollowing asnecessary: • Press andhold theleftarrow button tocontract thedistance between thelines closest tothe leftor top ofthe image. • Press andhold theright arrow button tocontract thedistance between thelines closest tothe right or bottom ofthe image. 17. When youarefinished, presstheMenu button. Note: Ifnecessary, youcanfine-tune theresults ofyour Corner Walladjustments usingPointCorrection. Parent topic:Image Shape
114 Related references Projector FeatureSettings -Settings Menu Related tasks Displaying aTest Pattern Correcting ImageShape withPoint Correction Selecting anImage Source If you connected multipleimagesources tothe projector, suchasacomputer andDVD player, youmay want toswitch fromoneimage source tothe other. 1. Make suretheconnected imagesource youwant touse isturned on. 2. Forvideo image sources, insertaDVD orother video media andpress itsplay button, ifnecessary. 3. Doone ofthe following: • Press theSource Searchbuttononthe projector orthe Search buttononthe remote controluntil you seetheimage fromthesource youwant.
115 • Press thebutton forthe source youwant onthe remote control. 1 HDMI portsource 2 HDBaseT portsource 3 Computer portsource 4 Network portsource 5 BNC source 6 DVI-D source Parent topic:UsingBasicProjector Features Remote ControlOperation The remote controlletsyou control theprojector fromalmost anywhere inthe room, upto98.4 feet (30 m)away. Youcanpoint itat the front orrear ofthe projector.
116 Make surethatyouaimtheremote controlatthe projectors receiverswithintheangles listedhere. 1 98 feet (30m) 2 ± 60 ° 3 ± 20 ° 4 ± 30 ° 5 +10 °to +50 ° Note: Avoidusingtheremote controlinconditions withbright fluorescent lightsorindirect sunlight, or the projector maynotrespond tocommands. Ifyou willnot use theremote controlforalong time, remove thebatteries. Parent topic:UsingBasicProjector Features Related tasks Replacing theRemote ControlBatteries
117 Projection Modes Depending onhow youpositioned theprojector, youmay need tochange theprojection modesoyour images projectcorrectly. • Front (default setting)letsyou project fromatable infront ofthe screen. • Front/Ceiling flipstheimage overtop-to-bottom toproject upside-down fromaceiling orwall mount. • Rear flipstheimage horizontally toproject frombehind atranslucent screen. • Rear/Ceiling flipstheimage overtop-to-bottom andhorizontally toproject fromtheceiling andbehind a translucent screen. Note: Toview 3Dimages, youmust project ontothefront ofasilver screen designed forpassive 3D images. Changing theProjection ModeUsing theRemote Control Changing theProjection ModeUsing theMenus Parent topic:UsingBasicProjector Features Changing theProjection ModeUsing theRemote Control You canchange theprojection modetoflip the image overtop-to-bottom. 1. Turn onthe projector anddisplay animage. 2. Hold down theA/V Mute button onthe remote controlforfive seconds. The image disappears brieflyandreappears flippedtop-to-bottom. 3. Tochange projection backtothe original mode,holddown theA/V Mute button forfive seconds again. Parent topic:Projection Modes
118 Changing theProjection ModeUsing theMenus You canchange theprojection modetoflip the image overtop-to-bottom and/orleft-to-right usingthe projector menus. 1. Turn onthe projector anddisplay animage. 2. Press theMenu button. 3. Select theExtended menuandpress Enter. 4. Select theProjection settingandpress Enter. 5. Select aprojection modeandpress Enter. 6. Press Menu orEsc toexit themenus. Parent topic:Projection Modes Image Aspect Ratio The projector candisplay images indifferent width-to-height ratioscalled aspect ratios.Normally the input signal fromyourvideo source determines theimages aspectratio.However, forcertain images you canchange theaspect ratiotofityour screen bypressing abutton onthe remote control. If you always wanttouse aparticular aspectratioforacertain videoinputsource, youcanselect itusing the projectors menus.
119 Changing theImage Aspect Ratio Available ImageAspect Ratios Parent topic:UsingBasicProjector Features Related references Image Quality Settings -Image Menu Changing theImage Aspect Ratio You canchange theaspect ratioofthe displayed imagetoresize it. Note: SettheScreen Typesetting inthe projectors Extendedmenubefore changing theaspect ratio. 1. Turn onthe projector andswitch tothe image source youwant touse. 2. Press theAspect buttononthe remote control. The shape andsize ofthe displayed imagechanges, andthename ofthe aspect ratioappears briefly onthe screen. 3. Tocycle through theavailable aspectratiosforyour input signal, presstheAspect button repeatedly. Parent topic:Image Aspect Ratio Available ImageAspect Ratios You canselect thefollowing imageaspect ratios,depending onthe selected ScreenTypesetting and the input signal fromyourimage source. Note: Blackbands andcropped orstretched imagesmayproject incertain aspectratios,depending on the aspect ratioandresolution ofyour input signal.
120 Screen Typesetting Available aspectratios 4:3 Auto, Normal, 4:3,6:9,Native* 16:9 Auto, Normal, Full,H-Zoom, V-Zoom,Native 16:10 Auto, Normal, 16:9,Full,H-Zoom, V-Zoom,Native *Available onlywhen projecting computerimages,orfrom sources connected tothe HDMI port Aspect ratiosetting Description Auto Automatically setstheaspect ratioaccording tothe input signal. Normal Displays imagesinthe same aspect ratioofthe input signal. 4:3 Displays imagesata4:3 aspect ratio. 16:9 Displays imagesata16:9 aspect ratio. Full Displays imagesusingthefullsize ofthe projection area,butdoes not maintain theaspect ratio. H-Zoom V-Zoom Displays imagesusingthefullwidth (H-Zoom) orfull height (V- Zoom) ofthe projection areaandmaintains theaspect ratioofthe image. Areasthatexceed theedges ofthe projected screenarenot projected. Native Displays imagesasis(aspect ratioandresolution aremaintained). Areas thatexceed theedges ofthe projected screenarenot projected. Parent topic:Image Aspect Ratio Related tasks Setting theScreen Type Color Mode The projector offersdifferent ColorModes toprovide optimum brightness, contrast,andcolor fora variety ofviewing environments andimage types.Youcanselect amode designed tomatch yourimage and environment, orexperiment withtheavailable modes. If you always wanttouse aparticular colormode foracertain videoinputsource, youcanselect itusing the projector menus. Changing theColor Mode