Epson Projector Pro G7805 User Manual

							

131
1.
Toprevent unauthorized useofthe projector, selectPower OnProtection ,press Enter,select On,
 press
Enter again, andpress Esc.
 2.
Toprevent changes tothe Users Logoscreen orrelated display settings, selectUsers Logo
 Protection
,press Enter,select On,press Enter again, andpress Esc.
 3.
Toprevent changes tonetwork settings, selectNetwork Protection ,press Enter,select On,press
 Enter
again, andpress Esc.
 4.
Toprevent changes tothe projectors timeorschedule settings,selectSchedule Protection ,press
 Enter
,select On,press Enter again, andpress Esc.
 Note:
Besure tokeep theremote controlinasafe place; ifyou lose it,you willnot beable toenter the
 password
requiredtouse theprojector.
 Parent
topic:Password SecurityTypes
 Entering
aPassword toUse theProjector
 If
a password isset upand aPower OnProtection passwordisenabled, youseeaprompt toenter a
 password
whenever youturn onthe projector.
 You
must enter thecorrect password touse theprojector. 
						

							

132
1.
Press andhold down theNum button onthe remote controlwhileyouenter thepassword usingthe
 numeric
buttons.
 Note:
Thedefault password is0000 .
 The
password screencloses.
 2.
Ifthe password isincorrect, thefollowing mayhappen:
 •
You seeawrong password messageandaprompt totry again. Enterthecorrect password to
 proceed.

•
Ifyou enter anincorrect password severaltimesinsuccession, theprojector displaysarequest
 code
andamessage tocontact EpsonSupport. Donot attempt toenter thepassword again.
 When
youcontact EpsonSupport, providethedisplayed requestcodeandproof ofownership for
 assistance
inunlocking theprojector.
 Parent
topic:Password SecurityTypes
 Saving
aUser s Logo Image toDisplay
 You
cantransfer animage tothe projector andthen display itwhenever theprojector turnson.You can
 also
display theimage whentheprojector isnot receiving aninput signal orwhen youtemporarily stop
 projection
(usingtheA/V Mute feature). Thistransferred imageiscalled theUsers Logoscreen.
 The
image youselect asthe Users Logocanbeaphoto, graphic, orcompany logo,which isuseful in
 identifying
theprojectors ownertohelp deter theft.Youcanprevent changes tothe Users Logoby
 setting
uppassword protection forit.
 1.
Display theimage youwant toproject asthe Users Logo.  
						

							

133
2.
Press theMenu button, selecttheExtended menu,andpress Enter.
 3.
Select theUsers Logosetting andpress Enter.
 You
seeaprompt askingifyou want touse thedisplayed imageasausers logo.
 4.
Select Yesandpress Enter.
 You
seeaselection boxoverlaying yourimage.
 5.
Use thearrow buttons onthe remote controlorcontrol paneltosurround theimage areayouwant to
 use
asthe Users Logoandpress Enter.
 You
seeaprompt askingifyou want toselect thisimage area.
 6.
Select Yesandpress Enter.(If you want tochange theselected area,select No,press Enter,and
 repeat
thelast step.) 
						

							

134
You
seetheUsers Logozoom factor menu.
 7.
Select azoom percentage andpress Enter.
 You
seeaprompt askingifyou want tosave theimage asthe Users Logo.
 8.
Select Yesandpress Enter.
 You
seeacompletion message.
 9.
Press Esctoexit themessage screen.
 10.
Select theExtended menuandpress Enter.
 11.
Select Display andpress Enter.
 12.
Select whenyouwant todisplay theUsers Logoscreen:
 •
To display itwhenever thereisno input signal, selectDisplay Background andsetitto Logo .
 •
To display itwhenever youturn theprojector on,select Startup Screenandsetitto On .
 •
To display itwhenever youpress theA/V Mute button, selectA/VMute andsetitto Logo .
 To
prevent anyonefromchanging theUsers Logosettings withoutfirstentering apassword, seta
 password
andenable UsersLogosecurity.
 Parent
topic:Password SecurityTypes
 Locking
theProjector s Buttons
 You
canlock thebuttons onthe projectors controlpaneltoprevent anyonefromusing theprojector. You
 can
lock allthe buttons orall the buttons exceptthepower button.
 1.
Press theMenu button. 
						

							

135
2.
Select theSettings menuandpress Enter.
 3.
Select LockSetting andpress Enter.
 4.
Select theControl PanelLocksetting andpress Enter.
 5.
Select oneofthese locktypes andpress Enter:
 •
To lock allofthe projectors buttons,selectFullLock .
 •
To lock allbuttons exceptthepower button, selectPartial Lock.
 You
seeaconfirmation prompt.
 6.
Select Yesandpress Enter.
 Unlocking
theProjector s Buttons
 Parent
topic:Projector SecurityFeatures
 Related
references
 Projector
Parts-Control Panel
 Unlocking
theProjector s Buttons
 If
the projectors buttonshavebeen locked, holdtheEnter button onthe projectors controlpanelfor
 seven
seconds tounlock them.
 Parent
topic:Locking theProjector s Buttons 
						

							

136
Installing
aSecurity Cable
 You
caninstall twotypes ofsecurity cablesonthe projector todeter theft.
 •
Use thesecurity slotonthe projector toattach aKensington lock.Seeyour local computer or
 electronics
dealerforpurchase information.
 •
Use thesecurity cableattachment pointonthe projector toattach awire cable andsecure itto aroom
 fixture
orheavy furniture.
 Note:
Donot pass drop-prevention cablesthrough thesecurity cableattachment pointwhen mounting
 the
projector onawall orceiling.
 Parent
topic:Projector SecurityFeatures
 Related
references
 Projector
Parts-Rear  
						

							

137
Projecting
TwoImages Simultaneously
 You
canusethesplit screen feature tosimultaneously projecttwoimages fromdifferent imagesources
 next
toeach other. Youcancontrol thesplit screen feature usingtheremote controlorthe projector
 menus.

Note:
Whileyouusethesplit screen feature, otherprojector featuresmaynotbeavailable andsome
 settings
maybeautomatically appliedtoboth images.
 1.
Press theSplit button onthe remote control.
 The
currently selectedinputsource movestothe leftside ofthe screen.
 2.
Press theMenu button.   
						

							

138
You
seethisscreen:
 3.
Toselect aninput source forthe other image, selecttheSource setting,pressEnter,select the
 input
source, selectExecute ,and press Enter.(You canalso change imagesources, ifnecessary.)
 4.
Toswitch theimages, selecttheSwap Screens settingandpress Enter.
 5.
Tochange theimage sizes,select theScreen Sizesetting, pressEnter,select asizing option,
 press
Enter,and press Menu toexit.
 Note:
Depending onthe video inputsignals, theimages maynotappear atthe same sizeeven ifyou
 choose
theEqual setting.
 6.
Tochoose theaudio youwant tohear, select theAudio Source setting,pressEnter,select an
 audio
option, pressEnter,and press Menu toexit.
 Note:
Select Autotohear audio fromthelargest screen orthe leftscreen.
 7.
Toexit thesplit screen feature, presstheSplit orEsc button.
 Parent
topic:Adjusting ProjectorFeatures 
						

							

139
Using
Multiple Projectors
 You
cancombine theprojected imagesfromtwoormore projectors tocreate onelarge image. The
 following
optionsareavailable:
 •
Project different imagesfromeach projector andcreate oneseamless image
 •
Project thesame image fromeach projector andusetheScale feature tocreate oneseamless image
 Follow
theinstructions inthese sections tosetup andproject frommultiple projectors.
 Projector
Identification SystemforMultiple Projector Control
 Adjusting
thePosition ofthe Projected ImageFromMultiple Projectors   
						

							

140
Scaling
anImage
 Adjusting
theLamp s Brightness
 Blending
theImage Edges
 Adjusting
theBlack Level
 Matching
theImage Colors
 Adjusting
theColor Tone(Color Uniformity)
 Adjusting
theColor Convergence (PanelAlignment)
 Configuring
Tiling
 Parent
topic:Adjusting ProjectorFeatures
 Projector
Identification SystemforMultiple Projector Control
 You
canoperate multiple projectors usingoneremote controlformore elaborate presentations. Todo
 this,
youassign anidentification numbertoeach projector andtothe remote control. Thenyoucan
 operate
allthe projectors atonce orindividually.
 You
canalso match thecolors displayed byany projectors youplan touse near each other.
 Caution:
Leaveatleast 20inches (50cm) ofspace between theprojectors toprevent themfrom
 overheating.

Setting
theProjector ID
 Setting
theRemote ControlID
 Parent
topic:UsingMultiple Projectors
 Setting
theProjector ID
 If
you want tocontrol multiple projectors fromaremote control, giveeach projector aunique ID.
 1.
Press theMenu button.
 2.
Select theExtended menuandpress Enter.
 3.
Select theMulti-Projection settingandpress Enter.