Epson Projector Pro G7500U User Manual

101
3.
Select theSettings menuandpress Enter.
 4.
Select theGeometric Correction settingandpress Enter.
 5.
Select theQuick Corner settingandpress Enter.Then press Enter again.
 You
seetheQuick Corner adjustment screen: 

102
6.
Use thearrow buttons onthe projector orthe remote controltoselect thecorner ofthe image you
 want
toadjust. Thenpress Enter.
 7.
Press thearrow buttons toadjust theimage shape asnecessary.
 8.
When youarefinished, pressEsc.
 Parent
topic:Image Shape
 Related
references
 Projector
FeatureSettings -Settings Menu
 Related
tasks
 Displaying
aTest Pattern
 Correcting
ImageShape withCurved Surface
 You
canusetheprojectors CurvedSurface settingtoadjust theshape ofan image projected ona
 curved...

103
2.
Press theMenu button.
 3.
Select theSettings menuandpress Enter.
 4.
Select theGeometric Correction settingandpress Enter.
 5.
Select theCurved Surface settingandpress Enter.
 Note:
Ifyou seeaconfirmation message,pressEnter.
 You
seethisscreen:
 6.
Select theCorrect Shapesettingandpress Enter. 

104
7.
Use thearrow buttons onthe projector orthe remote controltoselect thearea youwant toadjust.
 Then
press Enter.
 Note:
Toreset youradjustments, pressandhold theEsc button foratleast 2seconds todisplay a
 reset
screen. Thenselect Yes.
 8.
Use thearrow buttons onthe projector toadjust theimage shape.
 Note:
Ifthe adjustment triangleturnsgray,youcannot adjusttheshape anyfurther inthat direction.  

105
9.
Press theEsc button toreturn tothe Curved Surface menuscreen.
 10.
Repeat theprevious threesteps asnecessary toadjust otherimage areas.
 If
the image expands orcontracts, continuewiththenext steptoadjust thelinearity.
 11.
Select oneofthe following fromtheCurved Surface menuscreen:
 •
Horizontal Linearity:Adjusts horizontal expansion orcontraction.
 •
Vertical Linearity :Adjusts verticalexpansion orcontraction.
 12.
Select adisplayed linetouse asabaseline andpress Enter.
 The
selected baseline...

106
Related
references
 Projector
FeatureSettings -Settings Menu
 Related
tasks
 Displaying
aTest Pattern
 Correcting
ImageShape withPoint Correction
 Correcting
ImageShape withPoint Correction
 You
canusetheprojectors PointCorrection featuretofine-tune theimage shape usingpoints onagrid.
 This
isuseful foradjusting overlapping areasinmultiple projected imagesthatdonot line upcorrectly.
 1.
Turn onthe projector anddisplay animage.
 Note:
Youcandisplay apattern toaid inadjusting theprojected...

107
You
seethisscreen:
 6.
Select thePoint Correction settingandpress Enter.
 7.
Select thenumber ofgrid lines todisplay andpress Enter.
 Note:
Ifyou need tochange thecolor ofthe grid lines, select thePattern Colorsetting andselect a
 suitable
color.
 8.
Use thearrow buttons onthe projector orremote controltomove tothe point onthe grid thatyou
 want
toadjust. Thenpress Enter.
 The
boxchanges fromasingle linetoadouble-lined square.  

108
9.
Use thearrow buttons tocorrect theimage shape inall necessary directions.
 Note:
Youcanpress Enter toshow orhide theimage andgridtocheck theresults.
 10.
Press Esctoreturn tothe previous screenandselect another pointtocorrect, ifnecessary.
 11.
When youarefinished, presstheMenu button.
 Parent
topic:Image Shape
 Related
references
 Projector
FeatureSettings -Settings Menu
 Related
tasks
 Displaying
aTest Pattern
 Correcting
ImageShape withCorner Wall
 You
canusetheprojectors CornerWallsetting...

109
1.
Turn onthe projector anddisplay animage.
 Note:
Youcandisplay apattern toaid inadjusting theprojected imageusingtheSettings menu.
 Note:
Youcanalso display apattern toaid inadjusting theprojected imageusingtheTest Pattern
 button
onthe remote control.
 2.
Press theMenu button.
 3.
Select theSettings menuandpress Enter.
 4.
Select theGeometric Correction settingandpress Enter.
 5.
Select theCorner Wallsetting andpress Enter.
 Note:
Ifyou seeaconfirmation message,pressEnter. 

110
You
seethisscreen:
 6.
Select theCorner Typesetting andpress Enter.
 7.
Select oneofthe following:
 •
Horizontal Cornerwhenthesurfaces lineuphorizontally
 •
Vertical Cornerwhenthesurfaces lineupvertically
 8.
Press theEsc button toreturn tothe Corner Wallmenu screen.
 9.
Select theCorrect Shapesettingandpress Enter.