Epson Projector Pro G7200W User Manual

							

61
There
aretwo ways toconnect toyour projector wirelessly:
 •
Using theoptional QuickWireless Connection USBKey(Windows only);yourcomputer doesnot
 need
tobe connected toawireless networkoruse additional networksoftware toconnect withthis
 option

•
Configuring theconnection manuallyusingtheprojectors Networkmenus
 After
setting upthe projector asdescribed here,install thenetwork software fromtheincluded CDor
 download
thesoftware andmanuals asnecessary.
 Note:
Ifyour projector isconnected viaaLAN cable toanetwork thatincludes awireless accesspoint,
 you
canconnect tothe projector wirelessly throughtheaccess pointusing theEpson network software.
 Installing
theWireless LANModule
 Using
QuickWireless Connection (WindowsOnly)
 Selecting
WirelessNetworkSettingsManually
 Selecting
WirelessNetworkSettingsinOS X
 Selecting
WirelessNetworkSettingsinWindows
 Parent
topic:UsingtheProjector onaNetwork
 Related
references
 Optional
Equipment andReplacement Parts
 Installing
theWireless LANModule
 To
use theprojector overawireless network, installtheoptional Epson802.11b/g/n wirelessLAN
 module.
Donot install anyother typeofwireless LANmodule.
 Caution:
Neverremove themodule whileitsindicator lightisgreen orflashing, orwhile youare
 projecting
wirelessly. Youmay damage themodule orlose data.
 1.
Turn offthe projector andunplug thepower cord. 
						

							

62
2.
Slide theairfilter cover latchandopen theairfilter cover.
 3.
Remove thescrew securing thewireless LANmodule stopper, thenremove thestopper.   
						

							

63
4.
Insert thewireless LANmodule intotheport.
 5.
Replace thewireless LANmodule stopper andsecure itusing thescrew youremoved.
 6.
Close theairfilter cover.
 7.
Plug inand turn onthe projector.
 Parent
topic:Wireless NetworkProjection   
						

							

64
Related
references
 Optional
Equipment andReplacement Parts
 Using
Quick Wireless Connection (WindowsOnly)
 You
canusetheQuick Wireless Connection USBkeytoquickly connect yourcomputer tothe projector
 wirelessly.
Thenyoucanproject yourpresentation andremove thekey when youaredone.
 Note:
TheQuick Wireless Connection USBkeyisnot included withyour projector andisoptional.
 Note:
Makesurethewireless LANmodule isinstalled. Thewireless LANmodule isnot included with
 your
projector andisoptional.
 1.
Turn onthe projector.
 2.
Press theLAN button onthe remote control.
 You
seeascreen likethis:
 3.
Verify thatanSSID andIPaddress aredisplayed, thenremove thewireless LANmodule fromthe
 projector
ifnecessary. 
						

							

65
4.
Insert theQuick Wireless Connection USBkeyinto thesame portused forthe wireless LANmodule.
 You
seeaprojected messagethatthenetwork information updateiscomplete.
 5.
Remove theUSB key.
 6.
Reinsert thewireless LANmodule intotheprojector.
 7.
Connect theUSB keytoaUSB portonyour computer orlaptop.
 Note:
InWindows Vista,ifyou seetheAutoPlay window,selectRunLaunchQWRD.exe ,then
 select
Allow onthe next screen.
 8.
Follow theon-screen instructions toinstall theQuick Wireless Connection driver.
 Note:
Ifyou seeaWindows Firewallmessage, clickYestodisable thefirewall forthis application.
 After
afew minutes, yourcomputer imageisdisplayed bythe projector. Ifitdoes notappear, press
 the
LAN button onyour remote controlorrestart yourcomputer.
 9.
Run your presentation asnecessary.
 10.
When youfinish projecting wirelessly, selecttheSafely Remove Hardware optioninthe Windows
 taskbar,
thenremove theUSB keyfrom yourcomputer.
 Note:
Youmay need torestart yourcomputer toreactivate yourwireless LANconnection.  
						

							

66
Parent
topic:Wireless NetworkProjection
 Selecting
WirelessNetworkSettingsManually
 Before
youcanproject fromyourwireless network, youmust select thenetwork settingsforthe projector
 using
itsmenu system.
 1.
Turn onthe projector.
 2.
Press theMenu button.
 3.
Select theNetwork menuandpress Enter.
 4.
Make suretheWireless Modesetting isset toWireless LANOn.
 5.
Select Network Configuration andpress Enter. 
						

							

67
6.
Select theBasic menuandpress Enter.
 7.
Select thefollowing basicoptions asnecessary:
 •
Projector Nameletsyou enter aname upto16 alphanumeric characterslongtoidentify the
 projector
overthenetwork.
 •
PJLink Password letsyou enter apassword upto32 alphanumeric characterslongforusing the
 PJLink
protocol forprojector control.
 •
Web Control Password letsyou enter apassword upto8alphanumeric characterslongfor
 accessing
theprojector overtheweb.
 •
Projector Keywordletsyou turn onasecurity password toprevent accesstothe projector by
 anyone
notinthe room withit.You must enter adisplayed, randomized keywordfromacomputer
 using
theEasyMP MultiPCProjection softwaretoaccess theprojector.
 •
Display LANInfoletsyou select howtheprojector displaysnetworkinformation. Youcanselect
 an
option todisplay aQR code thatletsyou quickly connect youriOSorAndroid devicesusingthe
 Epson
iProjection app.
 Note:
Usethedisplayed keyboardtoenter thename, passwords andkeyword. Pressthearrow
 buttons
onthe remote controltohighlight characters andpress Enter toselect them. 
						

							

68
8.
Select theWireless LANmenu andpress Enter.
 9.
Select thesettings onthe Wireless LANmenu asnecessary foryour network.
 10.
When youfinish selecting settings,selectComplete andfollow theon-screen instructions tosave
 your
settings andexitthemenus.
 After
youcomplete thewireless settingsforyour projector, youneed toselect thewireless networkon
 your
computer ,or iOS orAndroid device.
 Wireless
LANMenu Settings
 Parent
topic:Wireless NetworkProjection 
						

							

69
Wireless
LANMenu Settings
 Setting
 Options
 Description

Connection
Mode
 Quick

Advanced
 Selects
thetype ofwireless
 connection:

Quick
:lets you quickly connect
 to
one computer oruse the
 optional
QuickWireless
 Connection
USBkeytoconnect
 Advanced
:lets you connect to
 multiple
computers viaawireless
 network
accesspoint
 (infrastructure
mode)
 Security
 Open

WPA2-PSK

WPA/WPA2-PSK
 Selects
thetype ofwireless
 security
usedinthe wireless
 network

Passphrase
 Up
to64 alphanumeric
 characters
 Enter
aparaphrase forthe
 wireless
network
 Channel
 1ch

6ch

11ch
 In
Quick connection mode,
 selects
thefrequency band
 (channel)
usedbythe wireless
 LAN

Search
Access Point
 To
Search View
 Search
foravailable wireless
 network
accesspointsin
 Advanced
connection mode
 SSID
 Up
32alphanumeric characters
 Sets
theSSID (network name)of
 the
wireless LANsystem the
 projector
isconnecting to
 SSID
Display
 On

Off
 Selects
whether todisplay the
 SSID
onthe network standby
 screen 
						

							

70
Setting
 Options
 Description

IP
Settings
 —
 Turns
onDHCP ifyour network
 assigns
addresses automatically;
 set
toOff tomanually enterthe
 networks
IPAddress ,Subnet
 Mask
,and Gateway Address
 IP
Address Display
 On

Off
 Selects
whether todisplay theIP
 address
onthe network standby
 screen

Parent
topic:Selecting WirelessNetworkSettingsManually
 Selecting
WirelessNetworkSettingsinOS X
 Before
connecting tothe projector, selectthecorrect wireless networkinOS X.
 1.
Click theAirPort icononthe menu baratthe topofthe screen.
 2.
Make sureAirPort isturned on,then doone ofthe following:
 •
Ifyour projector isset uponanexisting network (Advanced mode),selectthenetwork name
 (SSID).

•
Ifyour projector isconfigured forQuick mode, selecttheprojectors SSID.
 Parent
topic:Wireless NetworkProjection
 Selecting
WirelessNetworkSettingsinWindows
 Before
connecting tothe projector, selectthecorrect wireless networkonyour computer.
 1.
Toaccess yourwireless utilitysoftware, accesstheDesktop anddouble-click thenetwork iconon
 the
Windows taskbar.
 2.
Doone ofthe following:
 •
Ifyour projector isset uponanexisting network (Advanced mode),selectthenetwork name
 (SSID).

•
Ifyour projector isconfigured forQuick mode, selecttheprojectors SSID.
 3.
Click Connect .
 Parent
topic:Wireless NetworkProjection