Epson Projector Pro G7200W User Manual

161
•
Add New:Add anew scheduled event.
 7.
When youarefinished, selectReturn andpress Enter.
 8.
Select Setup complete andselect Yestosave yourchanges.
 Note:
Todelete allscheduled events,selectSchedule Resetandselect Yes.
 Parent
topic:Saving aScheduled Event
 Copying
MenuSettings Between Projectors
 After
youselect menusettings foryour projector, youcantransfer themtoanother projector ofthe same
 model.

Note:
Copytheprojectors settingsbeforeyouadjust theprojected imageusingtheprojectors
 Geometric...

162
Saving
Settings toaUSB Flash Drive
 You
cansave theprojector settingsyouwant totransfer toaUSB flash drive.
 Note:
Useanempty flashdrive. Ifthe drive contains otherfiles,thetransfer maynotcomplete correctly.
 1.
Turn offthe projector andunplug thepower cordfrom theprojectors powerinlet.
 2.
Insert theflash drive intothewireless LANmodule port.
 Note:
Connect theflash drive directly tothe projector. Donot use ahub oryour settings maynotbe
 saved
correctly.
 3.
Press andhold theEsc button onthe...

163
4.
When thepower andStatus lightsareblue andtheLamp andTemp lightsareorange, releasethe
 Esc
button.
 The
lights flashtoindicate thatsettings aretransferring tothe flash drive. When thelights stop
 flashing,
thepower lightturns blueandtheprojector entersstandby mode.
 Caution:
Donot unplug thepower cordorremove theflash drive while thelights areflashing. This
 could
damage theprojector.
 5.
Once theprojector entersstandby mode,remove theflash drive.
 Parent
topic:Copying MenuSettings Between...

164
Note:
Connect theflash drive directly tothe projector. Donot use ahub oryour settings maynotbe
 saved
correctly.
 3.
Press andhold theMenu button onthe control panelorremote controlasyou connect thepower
 cord
tothe projectors powerinlet.
 4.
When thepower andStatus lightsturnblue andtheLamp andTemp lightsturnorange, releasethe
 Menu
button.
 The
lights flashtoindicate thatsettings aretransferring tothe projector. Whenthelights stop
 flashing,
thepower lightturns blueandtheprojector entersstandby...

165
•
OS X10.6.x
 •
OS X10.7.x
 •
OS X10.8.x
 •
OS X10.9.x
 •
OS X10.10.x
 •
OS X10.11.x
 1.
Turn offthe projector andunplug thepower cordfrom theprojectors powerinlet.
 2.
Connect aUSB cable toyour projectors Serviceport.
 3.
Connect theother endtoany available USBportonyour computer.
 4.
Press andhold theEsc button onthe control panelorremote controlasyou connect thepower cord
 to
the projectors powerinlet.
 5.
When thepower andStatus lightsturnblue andtheLamp andTemp lightsturnorange, releasethe...

166
Transferring
SettingsFromaComputer
 After
saving projector settingstoacomputer, youcantransfer themtoanother projector ofthe same
 model.

Your
computer mustberunning oneofthe following operating systems:
 •
Windows Vista
 •
Windows 7
 •
Windows 8.x
 •
Windows 10
 •
OS X10.5.8
 •
OS X10.6.x
 •
OS X10.7.x
 •
OS X10.8.x
 •
OS X10.9.x
 •
OS X10.10.x
 •
OS X10.11.x
 Do
not adjust image settings onaprojector untilafter youtransfer settings toit.Otherwise, youmay have
 to
repeat youradjustments.
 1.
Turn...

167
5.
When thepower andStatus lightsturnblue andtheLamp andTemp lamps turnorange, releasethe
 Menu
button.
 The
projector showsupasaremovable diskonyour computer.
 6.
Copy thepjconfdata.bin filefrom yourcomputer tothe removable disk.
 Note:
Donot copy anyother filestothe removable disk.
 7.
Once thefilehas copied, doone ofthe following:
 •
Windows: OpentheMy Computer ,Computer ,or Windows Explorerutility.Right-click the
 name
ofyour projector (listedasaremovable disk)andselect Eject.
 •
OS X:Drag...

168
Adjusting
theMenu Settings
 Follow
theinstructions inthese sections toaccess theprojector menusystem andchange projector
 settings.

Using
theProjector s Menus
 Image
Quality Settings -Image Menu
 Input
Signal Settings -Signal Menu
 Projector
FeatureSettings -Settings Menu
 Projector
SetupSettings -Extended Menu
 Projector
NetworkSettings-Network Menu
 Projector
Information Display-Info Menu
 Projector
ResetOptions -Reset Menu
 Using
theProjector s Menus
 You
canusetheprojectors menustoadjust...

169
You
seethemenu screen displaying theImage menusettings.
 2.
Press theupordown arrow button tomove through themenus listedonthe left. The settings for
 each
menu aredisplayed onthe right.
 Note:
Theavailable settingsdependonthe current inputsource.
 3.
Tochange settings inthe displayed menu,pressEnter.
 4.
Press theupordown arrow button tomove through thesettings.
 5.
Change thesettings usingthebuttons listedonthe bottom ofthe menu screens.
 6.
Toreturn allthe menu settings totheir default values,...

170
Image
Quality Settings -Image Menu
 Settings
onthe Image menuletyou adjust thequality ofyour image forthe input source youarecurrently
 using.
Theavailable settingsdependonthe currently selectedinputsource.
 To
change settings foraninput source, makesurethesource isconnected andselect thatsource.
 Setting
 Options
 Description

Color
Mode
 See
thelistofavailable Color
 Modes
 Adjusts
thevividness ofimage
 colors
forvarious imagetypes
 and
environments
 Brightness
 Varying
levelsavailable
 Lightens...