Epson Projector Pro G7000W User Manual
Have a look at the manual Epson Projector Pro G7000W User Manual online for free. It’s possible to download the document as PDF or print. UserManuals.tech offer 1734 Epson manuals and user’s guides for free. Share the user manual or guide on Facebook, Twitter or Google+.
181 Setting Options Description HDBaseT Control Communications Extron XTP Selects thecommunication settings forconnections toan HDBaseT transmitter orswitcher Control Communications : enables ordisables communication fromtheEthernet and serial portsonthe transmitter; turningonthis setting disables theprojectors LAN,RS- 232C ,and Remote ports(Extron XTP must beturned offtouse this setting) Extron XTP:set toOn when you connect anExtron XTP transmitter orswitcher tothe HDBaseT ports Multi-Projection Brightness Level Edge Blending Multi-screen Projector ID Select various optionswhen projecting frommultiple projectors Brightness Level:adjusts the brightness ofthe lamp; Power Consumption inthe Settings menu mustbeset toNormal to use thissetting Edge Blending :blends the border between multipleimages to create aseamless screen Multi-screen :adjusts thetintand brightness ofeach projected image Projector ID:sets theprojector to aparticular IDnumber which allows youtouse aremote control toindividually control projectors
182 Setting Options Description Schedule Settings — Schedule specificoperations to occur atapre-scheduled time Language Various languages available Selects thelanguage for projector menuandmessage displays (notchanged byReset option) Display settings Setting Description Menu Position Selects theposition ofthe projector menudisplayed onthe screen Messages Controls whethermessages aredisplayed onthe screen Display Background Selects thescreen colororlogo todisplay whennosignal is received Startup Screen Controls whetheraspecial screenappears whentheprojector starts up A/V Mute Selects thescreen colororlogo todisplay whenA/VMute is turned on Standby Confirmation Displays aconfirmation messageafterpressing theStandby button onthe remote control Air Filter Notice Displays amessage whenaclog inthe airfilter isdetected Screen Sets theaspect ratioandposition ofthe projected image according tothe type ofscreen beingused Panel Alignment Corrects colormisalignment inthe projected image Color Uniformity Adjusts thecolor tonebalance OSD Rotation Rotate themenu 90degrees Operation settings
183 Setting Options Description Direct Power On — Turns onthe projector whenyou plug itin Sleep Mode — Automatically placesthe projector instandby modeafter an interval ofinactivity Sleep ModeTimer 1 to 30 minutes Sets thetime before theprojector automatically turnsoff(Sleep Mode mustbeturned on) High Altitude Mode — Regulates theprojector ’s operating temperature at altitudes above4921feet (1500 m) Auto Source Search — Automatically selectaninput source Auto Power On — If Computer orBNC isselected, the projector turnsonwhen an input signal isdetected A/V Mute Settings Fade-in Fade-out Select thenumber ofseconds for the transition effect BNC Sync Termination — Sets thetermination forthe signal from theBNC port(normally should beoffunless analog termination suchasfor switchers is necessary) Remote ControlType Normal Simple Select Normal touse theremote control thatcame withthe projector orSimple touse a different Epsonprojector remote control anddisable theremote control thatcame withthe projector Beep — Turns onoroff the beep that sounds whenyouturn the projector onoroff
184 Setting Options Description Indicators — Select Offtoturn offprojector indications, exceptwarning indicators Instant Off — Select Enabled toplace the projector intostandby statusafter power offorDisabled tosend the projector intostandby status approximately 3minutes after power off Inv Direction Button — Enable thissetting ifyou installed the projector onaceiling and want toinvert thearrow buttons on the control panel Lens Type Various lensmodel numbers Select themodel number forthe attached lens Date &Time — Adjusts theprojectors system time anddate settings Lens Calibration — Display information aboutthe lens currently inuse Parent topic:Adjusting theMenu Settings
185 Projector NetworkSettings-Network Menu Settings onthe Network menuletyou view network information andsetupthe projector formonitoring and control overanetwork. Setting Options Description Wireless Mode — Enable ordisable wireless communication Net. Info-Wireless LAN Connection mode Antenna level Projector Name SSID DHCP IP Address Subnet Mask Gateway Address MAC Address Region Code Displays wirelessnetworkstatus and details
186 Setting Options Description Net. Info-Wired LAN Projector Name DHCP IP Address Subnet Mask Gateway Address MAC Address Displays wirednetwork status and details Display theQRCode Network Configuration Accesses additional network menus Configures yournetwork settings Parent topic:Adjusting theMenu Settings Related concepts Wireless NetworkProjection Wired Network Projection Projector Information Display-Info Menu You candisplay information abouttheprojector andinput sources byviewing theInfo menu. However, you cannot change anysettings inthe menu.
187 Note: Thelamp usage timerdoesnotregister anyhours untilyouhave usedthelamp foratleast 10 hours. Available settingsdependonthe current inputsource. Setting Options Description Projector Info Source Displays thename ofthe port to which thecurrent inputsource is connected Input Signal Displays theinput signal setting of the current inputsource Resolution Displays theresolution ofthe current inputsource Refresh Rate Displays therefresh rateofthe current inputsource Sync Info Displays information thatmay be needed byaservice technician Status Displays information about projector problems thatmay be needed byaservice technician Serial Number Displays theprojectors serial number Lens Type Displays thelens model number Event ID Displays theEvent IDnumber corresponding toaspecific projector problem;seethelistof Event IDcodes HDBaseT SignalQuality Displays theimage signal information fromtheHDBaseT port Lamp Info Lamp Hours Displays thenumber ofhours (H ) the lamp hasbeen usedin Normal andECO Power Consumption modes;ifthe information isdisplayed in yellow, obtainagenuine Epson replacement lampsoon
188 Setting Options Description Version Main Video Displays theprojectors firmware information Status Information — Displays theprojector status Event IDCode List Parent topic:Adjusting theMenu Settings Related references Projector LampSpecifications Optional Equipment andReplacement Parts Event IDCode List If the Event IDoption onthe Info menu displays acode number, checkthislistofEvent IDcodes forthe solution tothe projector problemassociated withthecode. Event IDcode Cause andsolution 0432 The networked programdidnot start. Turntheprojector offand then onagain. 0435 0434 Unstable networkcommunication. Checkthenetwork communication status,waita few moments, andtryconnecting tothe network again. 0482 0484 0485 0433 Cannot displaythetransferred images.Restartthenetworked program. 0481 Communication withcomputer wasdisconnected. Restartthenetwork program. 04FE The networked programquitunexpectedly. Checkthenetwork communication status, thenturntheprojector offand then onagain. 0483 04FF A projector systemerrorhasoccurred. Turntheprojector offand then onagain. 0479 0891 Cannot findanaccess pointwiththesame SSID. Setyour computer, accesspoint, and projector tothe same SSID.
189 Event IDcode Cause andsolution 0892 The WPA/WPA2 authentication typedoes notmatch. Makesurethewireless network securitysettingsarecorrect. 0893 The TKIP/AES encryption typedoes notmatch. Makesurethewireless network security settingsarecorrect. 0894 Communication withunauthorized accesspointwasdisconnected. Contactyour network administrator. 0898 Failed toacquire DHCP.MakesuretheDHCP serverisoperating correctly.Ifyou are notusing DHCP, turnoffthe DHCP setting inthe Network menus. 0899 Communication error.Restart thenetworked program. Parent topic:Projector Information Display-Info Menu Projector ResetOptions -Reset Menu You canreset mostofthe projector settingstotheir default valuesusingtheReset AllConfig optionon the Reset menu. You canalso reset theprojectors lampusage timertozero when youreplace thelamp using theReset Lamp Hours option, orreset thesaved names andsettings inthe Save Memory listusing theReset All Memories option.
190 You cannot resetthefollowing settingsusingtheReset AllConfig option: • Input Signal • Users Logo • Language • Network menuitems • Lamp Hours • Date &Time • Panel Alignment • Color Uniformity • Memory • Color Matching Parent topic:Adjusting theMenu Settings