Epson Projector Pro G7000W User Manual

51
5.
Hold thelens firmly andslide thelock lever tothe Lock position (asshown) untilitlocks.
 6.
Replace thelens cover.
 7.
Ifprompted, selectYestocalibrate thelens.
 Note:
Lenscalibration helpstheprojector tocorrectly acquirethelens position andadjustment
 range,
andcantake upto100 seconds tocomplete. Whencalibration isfinished, thelens returns to
 the
same position itwas inbefore calibration. (ELPX01returnstothe standard position.)
 8.
When usingoneofthe following lenses,selectthelens type inthe...

52
Caution:
Removethelens onlywhen necessary andmake surethefront ofthe projector isnot facing up
 when
youremove thelens. Thisprevents dirtordust from entering theprojector andlowering the
 projection
quality.Avoidtouching thelens withyour bare hands toprevent fingerprints onordamage to
 the
lens surface.
 1.
Center thelens using theLens Shift(remote) orLens (control panel)button.
 2.
Turn offthe projector andunplug thepower cord.
 3.
Pull thelens cover offofthe projector.
 4.
Hold thelens firmly...

53
Attaching
andRemoving theCable Cover
 You
canattach thecable cover thatcame withyour projector tohide theattached cablesfromview.
 1.
Bundle thecables together usingaband orother fastener (notprovided).
 Caution:
Donot bundle thepower cordtothe other cables. Otherwise, afire may occur.
 2.
Place thecable cover onthe projector asshown, guiding thecables through thenotch onthe base of
 the
cable cover.   

54
3.
Tighten bothcable cover screws.
 To
remove thecover, loosen bothscrews andpullthecover offofthe projector.
 Parent
topic:Setting Upthe Projector
 Installing
Batteriesinthe Remote Control
 The
remote controlusesthetwo AAbatteries thatcame withtheprojector.
 Caution:
Useonly thetype ofbatteries specified inthis manual. Donot install batteries ofdifferent types,
 or
mix new andoldbatteries.  

55
1.
Remove thebattery cover.
 2.
Insert thebatteries withthe+and –ends facing asshown.   

56
3.
Replace thebattery coverandpress itdown untilitclicks intoplace.
 Warning:
Disposeofused batteries according tolocal regulations. Donot expose batteries toheat
 or
flame. Keepbatteries outofthe reach ofchildren; theyarechoking hazards andarevery
 dangerous
ifswallowed.
 Parent
topic:Setting Upthe Projector  

57
Using
theProjector onaNetwork
 Follow
theinstructions inthese sections toset upyour projector foruse onanetwork.
 Wired
Network Projection
 Wireless
NetworkProjection
 Setting
UpProjector NetworkE-MailAlerts
 Selecting
OtherNetwork Settings
 Controlling
aNetworked ProjectorUsingaWeb Browser
 Crestron
RoomView Support
 Wired
Network Projection
 You
canproject through awired network. Todothis, youconnect theprojector toyour network, andthen
 set
upyour projector andcomputer fornetwork projection....

58
2.
Connect theother endofthe cable tothe projectors LANport.
 Parent
topic:WiredNetwork Projection
 Selecting
WiredNetwork Settings
 Before
youcanproject fromcomputers onyour network, youmust select thenetwork settingsforthe
 projector
usingitsmenu system.
 Note:
Makesureyoualready connected theprojector toyour wired network usingtheLAN port.
 1.
Turn onthe projector.
 2.
Press theMenu button.
 3.
Select theNetwork menuandpress Enter.  

59
4.
Select Network Configuration andpress Enter.
 5.
Select theBasic menuandpress Enter.
 6.
Select thefollowing basicoptions asnecessary:
 •
Projector Nameletsyou enter aname upto16 alphanumeric characterslongtoidentify the
 projector
overthenetwork.
 •
Remote Password letsyou enter apassword upto8alphanumeric characterslongforaccessing
 the
Remote inthe Epson WebControl. (Defaultusername isEPSONREMOTE ;default password
 is
guest .)
 •
Web Control Password letsyou enter apassword upto8alphanumeric...

60
7.
Select theWired LANmenu andpress Enter.
 8.
Select yourIPSettings asnecessary:
 •
Ifyour network assignsaddresses automatically, turnonthe DHCP setting.
 •
Ifyou must setaddresses manually,turnoffDHCP andenter theprojectors IPAddress ,Subnet
 Mask
,and Gateway Addressasneeded.
 Note:
Tohighlight thenumbers youwant fromthedisplayed keyboard, pressthearrow buttons on
 the
remote control. Toselect ahighlighted number,pressEnter.
 9.
Toprevent displayofthe IPaddress onthe standby...