Epson Projector Pro G7000W User Manual

151
Related
concepts
 Color
Mode
 Adjusting
theColor Tone(Color Uniformity)
 You
canusetheColor Uniformity featuretomanually adjustthecolor tonebalance inthe projected
 image.

1.
Press theMenu button.
 2.
Select theExtended menuandpress Enter.
 3.
Select theDisplay settingandpress Enter.
 4.
Select theColor Uniformity settingandpress Enter.
 5.
Press Enterandselect On.
 6.
Press Esc.
 7.
Select theAdjustment Levelsetting andpress Enter.
 8.
Press theright andleftarrow buttons toadjust thelevel,...

152
9.
Select theStart Adjustments settingandpress Enter.
 10.
Select thearea ofthe screen thatyouwant toadjust andpress Enter.
 11.
Select thecolor (Red ,Green ,or Blue )you want toadjust, andusetheleftarrow button toweaken
 the
color toneandtheright arrow button tostrengthen thecolor tone.
 12.
Press Esc.
 13.
Repeat steps10and 11for each areayouwant toadjust.
 14.
When youarefinished, presstheMenu button.
 Parent
topic:UsingMultiple Projectors
 Adjusting
theColor Convergence (PanelAlignment)
 You...

153
2.
Select theExtended menuandpress Enter.
 3.
Select theDisplay settingandpress Enter.
 4.
Select thePanel Alignment settingandpress Enter.
 5.
Press Enterandselect On.
 6.
Press Esc.
 7.
Select theSelect Colorsetting andchoose oneofthe following:
 •
Rto adjust thered color convergence
 •
Bto adjust theblue color convergence
 Note:
Youcanadjust onlythered orblue color convergence; youcannot adjustthestandard green
 color
panel.
 8.
Select thePattern Colorsetting andpress Enter.
 9.
Select...

154
You
seethisscreen:
 11.
Use thearrow buttons onthe remote controltoadjust thecolor alignment inthe corner ofthe screen
 highlighted
bythe orange box.
 12.
Press theEnter button tomove tothe next corner ofthe screen.
 13.
When youarefinished adjusting eachcorner ofthe screen, pressEnter.
 You
seethisscreen: 

155
14.
Doone ofthe following:
 •
Ifyour projectors panelalignment isnow correct, selectExitandpress Enter toreturn tothe
 Panel
Alignment menu.
 •
Ifyour projector needsadditional panelalignment, selectSelect intersection andadjust and
 press
Enter.Use thearrow keysonthe remote controltohighlight thecorner ofany boxonthe
 screen
thatismisaligned andpress Enter toadjust thecolor convergence. Repeatthisstep as
 necessary.

Parent
topic:UsingMultiple Projectors
 Configuring
Tiling
 You
canproject thesame...

156
9.
Select theLocation Setupmenuandpress Enter.
 10.
Settheposition ofeach projected imageinRow Order andColumn Order.
 Row
Order :Layout thescreens fromtoptobottom insequential order,starting with1at the top.
 Column
Order:Layout thescreens fromlefttoright, starting withAon the left.
 11.
Choose theinput signal andproject theimage.
 12.
Select Extended >Multi-Projection >Scale ,select Auto,and press Enter.
 The
scale andcliprange areautomatically setaccording tothe blending width.
 13.
Fine tune...

157
You
seetheProtocol Emulation screen.
 4.
Select oneofthe following andpress Enter:
 •
Type Pfor Panasonic projectors
 •
Type Mfor Mitsubishi projectors
 •
Type Nfor NEC projectors
 •
Type Sfor Sony projectors
 5.
Turn theprojector offand onagain toenable thecontrol codeyouselected.
 Parent
topic:Adjusting ProjectorFeatures
 Viewing
3DImages
 Using
anoptional polarizer and3Dglasses, youcanusetwoprojectors toproject andview passive 3D
 images.
Seetheinstructions suppliedwiththeoptional equipment...

158
You
seethisscreen:
 6.
Select oneofthe following options:
 •
Load Memory :Overwrites yourcurrent settings withsaved settings
 •
Save Memory :Saves yourcurrent settings tomemory (10memories withdifferent namesare
 available)

Note:
Amemory namethathasalready beenusedisindicated byablue mark. Saving overa
 previously
savedmemory overwrites thesettings withyour current settings.
 •
Erase Memory :Erases theselected memorysettings
 •
Rename Memory:Renames asaved memory
 •
Reset Memory :Delete allsaved...

159
2.
Select theExtended menuandpress Enter.
 3.
Select theSchedule Settingssettingandpress Enter.
 The
Schedule Settingsscreenappears.
 4.
Select theSchedule menuandpress Enter.
 5.
Select AddNew andpress Enter.
 6.
Inthe Event Settings section,selecttheevents youwant tohave occur. (Select NoChange for
 events
thatyoudonot want tooccur.)
 7.
Inthe Date/Time Settingssection,setthe date andtime forthe scheduled eventstooccur.
 8.
When youarefinished, selectSaveandpress Enter.
 9.
Toschedule moreevents,...

160
The
colored boxesinthe calendar indicatethefollowing aboutthescheduled events:
 One-time
event
 Reoccurring
event
 Communication
ison/off
 Event
isinvalid
 Parent
topic:Saving aScheduled Event
 Editing
aScheduled Event
 You
caneditany currently scheduled event.
 1.
Press theMenu button.
 2.
Select theExtended menuandpress Enter.
 3.
Select theSchedule Settingssettingandpress Enter.
 You
seeascreen likethis:
 4.
Press theleftorright arrow buttons tohighlight thedate onthe calendar containing...