Home > Epson > Projector > Epson Projector PowerLite Pro Z9870UNL User Manual

Epson Projector PowerLite Pro Z9870UNL User Manual

    Download as PDF Print this page Share this page

    Have a look at the manual Epson Projector PowerLite Pro Z9870UNL User Manual online for free. It’s possible to download the document as PDF or print. UserManuals.tech offer 1734 Epson manuals and user’s guides for free. Share the user manual or guide on Facebook, Twitter or Google+.

    							
    
    4.
    Select theOthers menuandpress Enter.
     5.
    Enter uptotwo IPaddresses toreceive SNMPnotifications, using0to 255 foreach address field.
     Note:
    Donot use these addresses: 127.x.x.xor224.0.0.0 through255.255.255.255 (wherexis a
     number
    from0to 255).
     6.
    Ifavailable, selectthePriority Gateway settingforyour network.
     7.
    Ifyour network environment usesanAMX controller, turnonthe AMX Device Discovery settingto
     allow
    theprojector tobe detected.
     8.
    Ifyour network environment usesaCrestron RoomView controller,turnonthe Crestron RoomView
     setting
    toallow theprojector tobe detected.
     9.
    Ifyou areconnecting toanetwork usingBonjour, turnonthe Bonjour setting.
     10.
    Ifyou want thisprojector toreceive broadcasted messagesoverthenetwork, turnonthe Message
     Broadcasting
    setting.Administrators canbroadcast messages overthenetwork usingtheMessage
     Broadcasting
    plug-inforEasyMP Monitor(Windows only).
     11.
    When youfinish selecting settings,selectComplete andfollow theon-screen instructions tosave
     your
    settings andexitthemenus.
     Parent
    topic:UsingtheProjector onaNetwork
     71 
    						
    							
    
    Controlling
    aNetworked ProjectorUsingaWeb Browser
     Once
    youhave connected yourprojector toyour network, youcanselect projector settingsandcontrol
     projection
    usingacompatible webbrowser. Thisletsyou access theprojector remotely.
     Note:
    Theweb setup andcontrol features supportMicrosoft InternetExplorer 8.0orlater, andSafari on
     networks
    thatdonot use aproxy server forconnection. Youcannot selectallofthe projector menu
     settings
    orcontrol allprojector functions usingaweb browser.
     Note:
    Ifyou setStandby ModetoCommunication On,you canuseaweb browser toselect settings
     and
    control projection evenifthe projector isin standby mode.
     1.
    Make suretheprojector isturned on.
     2.
    Start yourwebbrowser onacomputer connected tothe network.
     3.
    Type theprojectors IPaddress intothebrowsers addressboxand press thecomputers Enterkey.
     You
    seetheWeb Control screen.
     Note:
    Youmay need tolog inbefore youseetheWeb Control screen. Ifyou seealog inwindow,
     enter
    yourusername andpassword. (Thedefault username isEPSONWEB andthedefault
     password
    isadmin .)
     4.
    Toselect projector menusettings, selectthename ofthe menu andfollow theon-screen instructions
     to
    select settings.
     5.
    Tocontrol projection remotely,selecttheWeb Remote option.
     72 
    						
    							
    
    You
    seeascreen likethis:
     1
     Power
    onbutton control
     2
     Input
    source selection controls(somebuttons maynotbeavailable depending onthe model)
     3
     Freeze
    buttoncontrol
     4
     Shutter
    buttoncontrol
     5
     Page
    Upand Page Down button controls
     6
     Source
    searchcontrol
     7
     Power
    offbutton control
     6.
    Select theicon corresponding tothe projector functionyouwant tocontrol.
     Operating
    aLens fromaWeb Browser
     Parent
    topic:UsingtheProjector onaNetwork
     Related
    references
     Projector
    SetupSettings -Extended Menu
     Operating
    aLens fromaWeb Browser
     You
    canoperate alens from theweb browser.
     73  
    						
    							
    
    1.
    Make suretheprojector isturned on.
     2.
    Start yourwebbrowser onacomputer connected tothe network.
     3.
    Type theprojectors IPaddress intothebrowsers addressboxand press thecomputers Enterkey.
     You
    seetheWeb Control screen.
     Note:
    Youmay need tolog inbefore youseetheWeb Control screen. Ifyou seealog inwindow,
     enter
    yourusername andpassword. (Thedefault username isEPSONWEB andthedefault
     password
    isadmin .)
     4.
    Select theLens Control option.
     74  
    						
    							
    
    You
    seeascreen likethis:
     5.
    Use thebuttons onthe screen toadjust theFocus ,Zoom ,Vertical LensShift,and Horizontal
     Lens
    Shiftfeatures.
     Parent
    topic:Controlling aNetworked ProjectorUsingaWeb Browser
     Crestron
    RoomView Support
     If
    you areusing theCrestron RoomView networkmonitoring andcontrol system, youcansetupyour
     projector
    foruse onthe system. Crestron RoomView letsyou control andmonitor yourprojector usinga
     web
    browser.
     Note:
    Youcannot usetheEpson WebControl featureorthe Message Broadcasting plug-inforEasyMP
     Monitor
    whenyouuseCrestron RoomView.
     75  
    						
    							
    
    For
    additional information onCrestron RoomView, contactCrestron.
     Setting
    UpCrestron RoomView Support
     Controlling
    aNetworked ProjectorUsingCrestron RoomView
     Parent
    topic:UsingtheProjector onaNetwork
     Setting
    UpCrestron RoomView Support
     To
    set upyour projector formonitoring andcontrol usingaCrestron RoomView system,makesureyour
     computer
    andprojector areconnected tothe network. Ifyou areconnecting wirelessly,setupthe
     projector
    usingtheAdvanced networkconnection mode.
     Note:
    Ifyou want touse theCrestron RoomView systemwhentheprojector isturned off,you need to
     adjust
    theStandby Modesettings inthe Extended menu.
     1.
    Press theMenu button.
     2.
    Select theNetwork menuandpress Enter.
     3.
    Select Network Configuration andpress Enter.
     4.
    Select theOthers menuandpress Enter.
     5.
    SettheCrestron RoomView settingtoOn toallow theprojector tobe detected.
     76 
    						
    							
    
    Note:
    Enabling CrestronRoomView disablestheEpson Message Broadcasting featureinthe
     EasyMP
    Monitorsoftware.
     6.
    When youfinish selecting settings,selectComplete andfollow theon-screen instructions tosave
     your
    settings andexitthemenus.
     7.
    Turn offthe projector, thenturniton again toenable thesetting.
     Parent
    topic:Crestron RoomView Support
     Related
    references
     Projector
    SetupSettings -Extended Menu
     Controlling
    aNetworked ProjectorUsingCrestron RoomView
     Once
    youhave setupyour projector touse Crestron RoomView, youcancontrol andmonitor projection
     using
    acompatible webbrowser.
     1.
    Start yourwebbrowser onacomputer connected tothe network.
     2.
    Type theprojectors IPaddress intothebrowsers addressboxand press thecomputers Enterkey.
     You
    seethisscreen:
     3.
    Select theinput source thatyouwant tocontrol inthe Sources Listbox. Youcanscroll through
     available
    sourcesusingtheupand down arrows inthe box.
     77  
    						
    							
    
    4.
    Tocontrol projection remotely,clicktheon-screen buttonsthatcorrespond tothe projectors remote
     control
    buttons. Youcanscroll through buttonoptions atthe bottom ofthe screen.
     Note:
    These on-screen buttonsdonot directly correspond tothe projectors remotecontrolbuttons:
     •
    OK acts asthe Enter button
     •
    Menu displays theprojectors menu
     5.
    Toview information abouttheprojector, clicktheInfo tab.
     6.
    Tochange projector, Crestron,andpassword settings,clicktheTools tab,select settings onthe
     displayed
    screen,andclick Send .
     7.
    When youfinish selecting settings,clickExittoexit theprogram.
     Parent
    topic:Crestron RoomView Support
     78 
    						
    							
    
    Using
    BasicProjector Features
     Follow
    theinstructions inthese sections touse your projectors basicfeatures.
     Turning
    Onthe Projector
     Turning
    Offthe Projector
     Selecting
    theLanguage forthe Projector Menus
     Setting
    theScreen Type
     Adjusting
    theImage Position UsingLensShift
     Adjusting
    theImage Position UsingScreen Position
     Displaying
    aTest Pattern
     Adjusting
    theImage Height
     Image
    Shape
     Resizing
    theImage withtheZoom Button
     Focusing
    theImage UsingtheFocus Button
     Remote
    ControlOperation
     Selecting
    anImage Source
     Selecting
    theLamp
     Projection
    Modes
     Image
    Aspect Ratio
     Color
    Mode
     Setting
    theDate andTime
     Turning
    Onthe Projector
     Turn
    onthe computer orvideo equipment youwant touse before youturn onthe projector soitcan
     display
    theimage source.
     79 
    						
    							
    
    1.
    Connect thepower cordtothe projectors powerinlet.
     2.
    Plug thepower cordintoanelectrical outlet.
     Note:
    WithDirect Power Onturned on,theprojector turnsonassoon asyou plug itin.
     The
    projectors powerlightturns blue.Thisindicates thattheprojector isreceiving power.
     3.
    Press theOnbutton onthe projector orremote controltoturn onthe projector.
     The
    Status lightflashes blueasthe projector warmsup.Once theprojector iswarmed up,theStatus
     light
    stops flashing andturns blue.
     Warning:
    Neverlookintotheprojector lenswhen thelamp ison. This candamage youreyes andis
     especially
    dangerous forchildren.
     If
    you donot see aprojected imagerightaway, trythe following:
     •
    Turn onthe connected computerorvideo device.
     •
    Insert aDVD orother video media andpress theplay button, ifnecessary.
     •
    Press theSearch buttononthe remote controltodetect thevideo source.
     •
    Press thebutton forthe video source onthe remote control.
     Parent
    topic:UsingBasicProjector Features
     Related
    references
     Projector
    SetupSettings -Extended Menu
     80  
    						
    All Epson manuals Comments (0)

    Related Manuals for Epson Projector PowerLite Pro Z9870UNL User Manual