Epson Projector PowerLite Pro Z9870UNL User Manual

3.
Replace thelens cover.
 4.
SettheLens Typesetting inthe Extended menuforthe type oflens youinstalled.
 Parent
topic:Attaching andRemoving aLens
 Attaching
andRemoving theCable Clips
 You
caninstall thecable clipsthatcame withyour projector toprovide additional supporttothe power
 cord
andHDMI cable.
 1.
Connect thepower cordandHDMI cabletothe projector.
 2.
Insert theend ofeach cable clipanchor intothecable clipslot above thepower inletandHDMI port
 as
shown.
 51   

1
 Cable
clipslot
 2
 Cable
clipanchor
 3
 Power
cableclip
 4
 HDMI
cableclip
 3.
Place theopen cable clipsaround thepower cordandHDMI cable, butdonot lock them.
 4.
Slide eachcable cliponto theanchors andlock theclips ontothepower andHDMI anchors as
 shown.

To
remove thecable clips,opentheclips anddisconnect thecables. Thenpinch thesides ofeach cable
 clip
anchor andcarefully pullthem outofthe cable clipslots.
 Parent
topic:Setting Upthe Projector
 Related
tasks
 Connecting
toaComputer forHDMI Video...

2.
Insert thebatteries withthe+and –ends facing asshown.
 3.
Close thebattery coverandpress itdown untilitclicks intoplace.
 Warning:
Disposeofused batteries according tolocal regulations. Donot expose batteries toheat
 or
flame. Keepbatteries outofthe reach ofchildren; theyarechoking hazards andarevery
 dangerous
ifswallowed.
 Parent
topic:Setting Upthe Projector
 53   

Using
theProjector onaNetwork
 Follow
theinstructions inthese sections toset upyour projector foruse onanetwork.
 Wired
Network Projection
 Wireless
NetworkProjection
 Setting
UpProjector NetworkE-MailAlerts
 Setting
UpMonitoring UsingSNMP
 Controlling
aNetworked ProjectorUsingaWeb Browser
 Crestron
RoomView Support
 Wired
Network Projection
 You
cansend images toyour projector throughawired network. Todothis, youconnect theprojector to
 your
network, andthen setupyour projector andcomputer fornetwork...

Note:
Ifyour projector isconnected viaaLAN cable toanetwork thatincludes awireless accesspoint,
 you
canconnect tothe projector wirelessly throughtheaccess pointusing theEasyMP Network
 Projection
software.
 Connecting
toaWired Network
 Selecting
WiredNetwork Settings
 Parent
topic:UsingtheProjector onaNetwork
 Related
references
 Projector
NetworkSettings-Network Menu
 Connecting
toaWired Network
 To
connect theprojector toawired localareanetwork (LAN),usea100Base-TX or10Base-T network
 cable....

Note:
Makesureyoualready connected theprojector toyour wired network usingtheLAN port.
 1.
Turn onthe projector.
 2.
Press theMenu button.
 3.
Select theNetwork menuandpress Enter.
 4.
Select Network Configuration andpress Enter.
 56 

5.
Select theBasic menuandpress Enter.
 6.
Select thefollowing basicoptions asnecessary:
 •
Projector Nameletsyou enter aname upto16 alphanumeric characterslongtoidentify the
 projector
overthenetwork.
 •
PJLink Password letsyou enter apassword upto32 alphanumeric characterslongforusing the
 PJLink
protocol forprojector control.
 •
Web Control Password letsyou enter apassword upto8alphanumeric characterslongfor
 accessing
theprojector overtheweb. (Default username isEPSONWEB ;default password is...

7.
Select theWired LANmenu andpress Enter.
 8.
Ifnecessary, selectIPSettings andpress Enter.
 9.
Select yourIPSettings asnecessary:
 •
Ifyour network assignsaddresses automatically, turnonthe DHCP setting.
 •
Ifyou must setaddresses manually,turnoffDHCP andenter theprojectors IPAddress ,Subnet
 Mask
,and Gateway Addressasneeded.
 Note:
Tohighlight thenumbers youwant fromthedisplayed keyboard, pressthearrow buttons on
 the
remote control. Toselect ahighlighted number,pressEnter.Or, press andhold theNum...

Note:
Ifyour projector isconnected viaaLAN cable toanetwork thatincludes awireless accesspoint,
 you
canconnect tothe projector wirelessly throughtheaccess pointusing theEasyMP Network
 Projection
softwarewithouttheneed forthe optional wireless module.
 After
installing themodule andsetting upthe projector, installthenetwork software fromtheEpson
 Projector
SoftwareCDordownload thesoftware, asnecessary. Usethefollowing softwareand
 documentation
toset up, control, andmonitor wireless projection:
 •...

Caution:
Neverremove theLAN module whileitsindicator lightisgreen orflashing, orwhile youare
 projecting
wirelessly. Youmay damage themodule orlose data.
 Note:
Thewireless LANmodule isnot included withyour projector andisoptional.
 1.
Push upand hold theinterface coverlatchwhile pressing thebutton onthe side asshown. Pullthe
 interface
coverstraight offthe projector.
 2.
Insert thewireless LANmodule intotheport.
 Parent
topic:Wireless NetworkProjection
 60