Epson Projector PowerLite Pro Z9800WNL User Manual

4.
Select theOthers menuandpress Enter.
 5.
Enter uptotwo IPaddresses toreceive SNMPnotifications, using0to 255 foreach address field.
 Note:
Donot use these addresses: 127.x.x.xor224.0.0.0 through255.255.255.255 (wherexis a
 number
from0to 255).
 6.
Ifavailable, selectthePriority Gateway settingforyour network.
 7.
Ifyour network environment usesanAMX controller, turnonthe AMX Device Discovery settingto
 allow
theprojector tobe detected.
 8.
Ifyour network environment usesaCrestron RoomView...

Controlling
aNetworked ProjectorUsingaWeb Browser
 Once
youhave connected yourprojector toyour network, youcanselect projector settingsandcontrol
 projection
usingacompatible webbrowser. Thisletsyou access theprojector remotely.
 Note:
Theweb setup andcontrol features supportMicrosoft InternetExplorer 8.0orlater, andSafari on
 networks
thatdonot use aproxy server forconnection. Youcannot selectallofthe projector menu
 settings
orcontrol allprojector functions usingaweb browser.
 Note:
Ifyou setStandby...

You
seeascreen likethis:
 1
 Power
onbutton control
 2
 Input
source selection controls(somebuttons maynotbeavailable depending onthe model)
 3
 Freeze
buttoncontrol
 4
 Shutter
buttoncontrol
 5
 Page
Upand Page Down button controls
 6
 Source
searchcontrol
 7
 Power
offbutton control
 6.
Select theicon corresponding tothe projector functionyouwant tocontrol.
 Operating
aLens fromaWeb Browser
 Parent
topic:UsingtheProjector onaNetwork
 Related
references
 Projector
SetupSettings -Extended Menu...

1.
Make suretheprojector isturned on.
 2.
Start yourwebbrowser onacomputer connected tothe network.
 3.
Type theprojectors IPaddress intothebrowsers addressboxand press thecomputers Enterkey.
 You
seetheWeb Control screen.
 Note:
Youmay need tolog inbefore youseetheWeb Control screen. Ifyou seealog inwindow,
 enter
yourusername andpassword. (Thedefault username isEPSONWEB andthedefault
 password
isadmin .)
 4.
Select theLens Control option.
 74  

You
seeascreen likethis:
 5.
Use thebuttons onthe screen toadjust theFocus ,Zoom ,Vertical LensShift,and Horizontal
 Lens
Shiftfeatures.
 Parent
topic:Controlling aNetworked ProjectorUsingaWeb Browser
 Crestron
RoomView Support
 If
you areusing theCrestron RoomView networkmonitoring andcontrol system, youcansetupyour
 projector
foruse onthe system. Crestron RoomView letsyou control andmonitor yourprojector usinga
 web
browser.
 Note:
Youcannot usetheEpson WebControl featureorthe Message Broadcasting...

For
additional information onCrestron RoomView, contactCrestron.
 Setting
UpCrestron RoomView Support
 Controlling
aNetworked ProjectorUsingCrestron RoomView
 Parent
topic:UsingtheProjector onaNetwork
 Setting
UpCrestron RoomView Support
 To
set upyour projector formonitoring andcontrol usingaCrestron RoomView system,makesureyour
 computer
andprojector areconnected tothe network. Ifyou areconnecting wirelessly,setupthe
 projector
usingtheAdvanced networkconnection mode.
 Note:
Ifyou want touse...

Note:
Enabling CrestronRoomView disablestheEpson Message Broadcasting featureinthe
 EasyMP
Monitorsoftware.
 6.
When youfinish selecting settings,selectComplete andfollow theon-screen instructions tosave
 your
settings andexitthemenus.
 7.
Turn offthe projector, thenturniton again toenable thesetting.
 Parent
topic:Crestron RoomView Support
 Related
references
 Projector
SetupSettings -Extended Menu
 Controlling
aNetworked ProjectorUsingCrestron RoomView
 Once
youhave setupyour projector touse Crestron...

4.
Tocontrol projection remotely,clicktheon-screen buttonsthatcorrespond tothe projectors remote
 control
buttons. Youcanscroll through buttonoptions atthe bottom ofthe screen.
 Note:
These on-screen buttonsdonot directly correspond tothe projectors remotecontrolbuttons:
 •
OK acts asthe Enter button
 •
Menu displays theprojectors menu
 5.
Toview information abouttheprojector, clicktheInfo tab.
 6.
Tochange projector, Crestron,andpassword settings,clicktheTools tab,select settings onthe
 displayed...

Using
BasicProjector Features
 Follow
theinstructions inthese sections touse your projectors basicfeatures.
 Turning
Onthe Projector
 Turning
Offthe Projector
 Selecting
theLanguage forthe Projector Menus
 Setting
theScreen Type
 Adjusting
theImage Position UsingLensShift
 Adjusting
theImage Position UsingScreen Position
 Displaying
aTest Pattern
 Adjusting
theImage Height
 Image
Shape
 Resizing
theImage withtheZoom Button
 Focusing
theImage UsingtheFocus Button
 Remote
ControlOperation
 Selecting...

1.
Connect thepower cordtothe projectors powerinlet.
 2.
Plug thepower cordintoanelectrical outlet.
 Note:
WithDirect Power Onturned on,theprojector turnsonassoon asyou plug itin.
 The
projectors powerlightturns blue.Thisindicates thattheprojector isreceiving power.
 3.
Press theOnbutton onthe projector orremote controltoturn onthe projector.
 The
Status lightflashes blueasthe projector warmsup.Once theprojector iswarmed up,theStatus
 light
stops flashing andturns blue.
 Warning:...