Epson Projector PowerLite Pro Z11005NL User Manual

Using
Frame Interpolation
 You
canusetheprojectors FrameInterpolation featuretosmooth fast-moving videobycomparing
 consecutive
imageframes andinserting anintermediate imageframebetween them(PowerLite Pro
 Z9750UNL/Z9870UNL/Z10000UNL/Z10005UNL).

1.
Press theMenu button.
 2.
Select theSignal menuandpress Enter.
 3.
Select theFrame Interpolation settingandpress Enter.
 You
seeascreen likethis:
 4.
Select thelevel ofinterpolation andpress Enter.
 151 

5.
When youarefinished, presstheMenu button.
 Note:
Ifyour resulting imagescontainnoise,turnoffthe Frame Interpolation setting.
 Parent
topic:Adjusting ProjectorFeatures
 Viewing
3DImages
 Using
anoptional polarizer kit(ELPPL01), passive3Dglasses (ELPGS02A/ELPGS02B), andtwo
 installation
frames(ELPMB44), youcanusetwoprojectors toproject andview passive 3Dimages. See
 the
instructions suppliedwiththeoptional equipment forsetup anduse.
 For
optimal viewing, selectthe3DSetup setting fromtheSignal...

You
seethisscreen:
 5.
Select oneofthe following options:
 •
Load Memory :Overwrites yourcurrent settings withsaved settings
 •
Save Memory :Saves yourcurrent settings tomemory (10memories withdifferent namesare
 available)

Note:
Amemory namethathasalready beenusedisindicated byablue mark. Saving overa
 previously
savedmemory overwrites thesettings withyour current settings.
 •
Erase Memory :Erases theselected memorysettings
 •
Rename Memory:Renames asaved memory
 6.
Press Esctoexit.
 Parent...

Note:
TheTime/Schedule Protectionsettinginthe Password Protection menumustbeturned offto
 schedule
anevent.
 Saving
aScheduled Event
 Viewing
Scheduled Events
 Editing
aScheduled Event
 Parent
topic:Adjusting ProjectorFeatures
 Saving
aScheduled Event
 You
canselect projector commands youwant toperform andschedule themasan event.
 1.
Press theMenu button.
 2.
Select theExtended menuandpress Enter.
 3.
Select theSchedule Settingssettingandpress Enter.
 The
Schedule Settingsscreenappears.
 4.
Select...

You
seeascreen likethis:
 The
colored boxesinthe calendar indicatethefollowing aboutthescheduled events:
 One-time
event
 Reoccurring
event
 Communication
ison/off
 Event
isinvalid
 Parent
topic:Scheduling ProjectorEvents
 Editing
aScheduled Event
 You
caneditany currently scheduled event.
 1.
Press theMenu button.
 2.
Select theExtended menuandpress Enter.
 3.
Select theSchedule Settingssettingandpress Enter.
 155  

You
seeascreen likethis:
 4.
Press theleftorright arrow buttons tohighlight thedate onthe calendar containing thescheduled
 event
youwant toedit.
 5.
Press theupordown arrow buttons tohighlight theevent youwant toedit, andpress Esc.
 6.
Select oneofthe following:
 •
On/Off :Enable ordisable theselected event.
 •
Edit :Edit thesettings forthe selected event.
 •
Clear :Delete theselected event.
 •
Add New:Add anew scheduled event.
 7.
When youarefinished, selectReturn andpress Enter.
 8.
Select Setup...

Adjusting
theMenu Settings
 Follow
theinstructions inthese sections toaccess theprojector menusystem andchange projector
 settings.

Using
theProjector s Menus
 Image
Quality Settings -Image Menu
 Input
Signal Settings -Signal Menu
 Projector
FeatureSettings -Settings Menu
 Projector
SetupSettings -Extended Menu
 Projector
NetworkSettings-Network Menu
 Projector
Information Display-Info Menu
 Projector
ResetOptions -Reset Menu
 Using
theProjector s Menus
 You
canusetheprojectors menustoadjust...

You
seethemenu screen displaying theImage menusettings.
 2.
Press theupordown arrow button tomove through themenus listedonthe left. The settings for
 each
menu aredisplayed onthe right.
 Note:
Theavailable settingsdependonthe current inputsource.
 3.
Tochange settings inthe displayed menu,pressEnter.
 4.
Press theupordown arrow button tomove through thesettings.
 5.
Change thesettings usingthebuttons listedonthe bottom ofthe menu screens.
 6.
Toreturn allthe menu settings totheir default values,...

Image
Quality Settings -Image Menu
 Settings
onthe Image menuletyou adjust thequality ofyour image forthe input source youarecurrently
 using.
Theavailable settingsdependonthe currently selectedinputsource.
 To
change settings foraninput source, makesurethesource isconnected andselect thatsource.
 Setting
 Options
 Description

Color
Mode
 See
thelistofavailable Color
 Adjusts
thevividness ofimage
 Modes
 colors
forvarious imagetypes
 and
environments
 Brightness
 Varying
levelsavailable
 Lightens...

Setting
 Options
 Description

Sharpness
 Varying
levelsavailable
 Adjusts
thesharpness or
 softness
ofimage details
 Color
Temp.
 3200,
5000,or10000 ºK (Kelvin),
 Sets
thecolor tonebased on
 or
–3 to 6
 color
temperature
 Advanced
 Various
optionsavailable
 Adjusts
thegamma levelsand
 intensity
ofindividual huesinthe
 image

Auto
Iris
 Off
 Adjusts
theprojected luminance
 based
onthe image brightness
 Normal

when
certain ColorModes are
 High
Speed
 selected

Note:
TheBrightness settingdoesnotaffect...