Epson Projector PowerLite Pro G6550WU User Manual

7.
Use thearrow buttons onthe projector orthe remote controltoselect thearea youwant toadjust.
 Then
press Enter.
 Note:
Toreset yourCurved Surface adjustments, presstheEsc button foratleast 2seconds to
 display
areset screen, thenselect Yes.
 8.
Use thearrow buttons onthe projector toadjust theshape.
 101  

Note:
Ifthe triangle pointing inthe direction youareadjusting theshape turnsgray,youcannot
 adjust
theshape anyfurther inthat direction.
 9.
Press theEsc button toreturn tothe Curved Surface menuscreen.
 10.
Repeat theprevious threesteps asnecessary toadjust anyremaining imageparts.
 If
the image expands orcontracts, continuewiththenext steptoadjust thelinearity.
 11.
Select oneofthe following fromtheCurved Surface menuscreen:
 •
Horizontal Linearity:Adjusts horizontal expansion orcontraction
 •...

Note:
Ifnecessary, youcanfinetune theresults ofyour Curved Surface adjustments usingPoint
 Correction.

Parent
topic:Image Shape
 Related
references
 Projector
FeatureSettings -Settings Menu
 Related
tasks
 Displaying
aTest Pattern
 Correcting
ImageShape withPoint Correction
 Correcting
ImageShape withPoint Correction
 You
canusetheprojectors PointCorrection featuretoadjust theimage viapoints onagrid. Thisis
 useful
toadjust overlapping areasinmultiple projections thatdonot line upcorrectly.
 1.
Press...

5.
Select thePoint Correction settingandpress Enter.
 6.
Select thenumber ofgrid lines todisplay andpress Enter.
 7.
Use thearrow buttons onthe projector orremote controltomove tothe point onthe grid thatyou
 want
toadjust. Thenpress Enter.The boxwillchange fromasingle linetoadouble-lined square.
 8.
Use thearrow buttons tocorrect thedistortion inall necessary directions.
 Note:
Youcanpress Enter toshow orhide theimage andgridtocheck theresults.
 9.
Press Esctoreturn tothe previous screenandselect...

Correcting
ImageShape withCorner Wall
 You
canusetheprojectors CornerWallsetting toadjust theshape ofan image projected onasurface
 with
right angles, suchasarectangular pillarorthe corner ofaroom (PowerLite ProG6800/G6900WU).
 1.
Turn onthe projector anddisplay animage.
 Note:
Youcandisplay apattern toaid inadjusting theprojected imageusingtheSettings menu.
 Note:
Theimage maynotbeevenly focused throughout evenafterperforming thesteps below.
 2.
Press theMenu button.
 3.
Select theSettings...

6.
Select theCorner Typesetting andpress Enter.
 7.
Select oneofthe following:
 •
Horizontal Cornerwhenthesurfaces lineuphorizontally
 •
Vertical Cornerwhenthesurfaces lineupvertically
 8.
Press theEsc button toreturn tothe Corner Wallmenu screen.
 9.
Select theCorrect Shapesettingandpress Enter.
 106   

10.
Adjust theprojectors positionandusethelens shiftoption tocenter theimage overthecorner ofthe
 wall
orthe point where thetwo surface areasmeet.(Therestofthese stepsshows Horizontal
 Corner
asthe selected CornerTypebuttheworkflow isthe same forVertical Corner.)
 Note:
Youcanpress Enter toshow orhide theimage andgridtocheck theresults.
 11.
Use thearrow buttons onthe projector orthe remote controltoselect thearea youwant toadjust.
 Then
press Enter.
 Tip:
When Horizontal Cornerisselected,...

When
Vertical Cornerisselected, adjusttheleftand right areas usingthepoints nearest thecenter
 of
the image asyour reference points.
 Note:
Toreset yourCorner Walladjustments, presstheEsc button foratleast 2seconds todisplay
 a
reset screen, thenselect Yes.
 12.
Use thearrow buttons onthe projector orremote controltoadjust theshape.
 13.
Repeat theprevious twosteps asnecessary toadjust anyremaining imageparts.
 If
the image expands orcontracts, continuewiththenext steptoadjust thelinearity.
 14.
Press...

17.
When youarefinished, pressMenu toexit.
 Note:
Ifnecessary, youcanfinetune theresults ofyour Corner Walladjustments usingPointCorrection.
 Parent
topic:Image Shape
 Related
references
 Projector
FeatureSettings -Settings Menu
 Related
tasks
 Displaying
aTest Pattern
 Correcting
ImageShape withPoint Correction
 Resizing
theImage WiththeZoom Ring
 1.
Turn onthe projector anddisplay animage. Wait30minutes afterturning onthe projector before
 setting
thefocus, zoom, andlens shiftformaximum accuracy....

Parent
topic:UsingBasicProjector Features
 Related
tasks
 Displaying
aTest Pattern
 Focusing
theImage UsingtheFocus Ring
 1.
Turn onthe projector anddisplay animage. Wait30minutes afterturning onthe projector before
 setting
thefocus, zoom, andlens shiftformaximum accuracy.
 Note:
Youcandisplay apattern toaid inadjusting theprojected imageusingtheSettings menu.
 2.
Tosharpen theimage focus,rotatetheprojector ’s focus ring.
 Focusing
theImage withtheOptional ShortThrow Lens
 Parent...