Epson Projector PowerLite Home Cinema 600 User Manual

Setting Up Wireless Network Security
Parent topic:
Using the Projector on a Network
Related references
Optional Equipment and Replacement Parts
Wireless Network Security Guidelines A wireless network allows the exchange of information using radio signals, so you can easily connect to
the network if you are within range of the radio signals. However, within a certain range, the signals can
reach unintended recipients.
Security experts recommend password protected wireless networks. Check with your...

Insert the wireless LAN module into the
USB-Aport.
The light on the wireless LAN module turns on when the module is installed and operating. The light
flashes when the module is communicating over the network.
Parent topic: Wireless Network Projection
Related references
Optional Equipment and Replacement Parts
Using Quick Wireless Connection (Windows Only) You can use the Quick Wireless Connection USB key to quickly connect your computer to the projector
wirelessly. Then you can project your presentation...

You see a screen like this:
3. Verify that an SSID and IP address are displayed, then remove the wireless LAN module from the projector.
4. Insert the Quick Wireless Connection USB key into the same port used for the wireless LAN module.
You see a projected message that the network information update is complete.
5. Remove the USB key.
6. Reinsert the wireless LAN module into the projector.
43  

7. Connect the USB key to a USB port on your computer or laptop.
Note: In Windows Vista, if you see the AutoPlay window, select Run LaunchQWRD.exe, then
select Allow on the next screen.
8. Follow the on-screen instructions to install the Quick Wireless Connection driver. Note: If you see a Windows Firewall message, click Yesto disable the firewall for this application.
After a few minutes, your computer image is displayed by the projector. If it does not appear, press
the LAN button on your remote...

3. Select the
Networkmenu and press Enter.
4. Select Network Configuration and pressEnter.
5. Select the Basicmenu and press Enter.
6. Select the following basic options as necessary: •Projector Name lets you enter a name up to 16 alphanumeric characters long to identify the
projector over the network.
45 

•
Web Control Password lets you enter a password up to 8 alphanumeric characters long for
accessing the projector over the web. (Default user name is EPSONWEB; default password is
admin.)
• Projector Keyword lets you turn on a security password to prevent access to the projector by
anyone not in the room with it. The projector displays a random keyword that you must enter from
a computer using the EasyMP Network Projection software or an iOS or Android device using
iProjection.
Note: Use the displayed...

Wireless LAN Menu Settings
Setting OptionsDescription
Wireless LAN Power OnTurns on wireless LAN support
Off
Connection Mode QuickSelects the type of wireless
connection:
Advanced
Quick: lets you quickly connect
to one computer or use the
optional Quick Wireless
Connection USB Key to connect
Advanced: lets you connect to
multiple computers via a wireless
network access point
Channel 1chInQuick connection mode,
selects the frequency band
6ch
(channel) used by the wireless
11ch LAN
Wireless LAN Sys....

Setting
OptionsDescription
IP Settings DHCP(On orOff) InAdvanced connection mode,
select DHCP if your network
IP Address
assigns addresses automatically,
Subnet Mask or turns off DHCP so you can
enter the networks IP address,
Gateway Address
subnet mask, and gateway
address as needed
SSID Display OnSelects whether to display the
SSID on the network standby
Off
screen
IP Address Display OnSelects whether to display the IP
address on the network standby
Off
screen
Parent topic: Selecting Wireless Network...

2. Make sure AirPort is turned on, then do one of the following:
• If your projector is set up on an existing network (Advanced mode), select the network name(SSID).
• If your projector is configured for Quick mode, select the projectors SSID.
Parent topic: Wireless Network Projection
Setting Up Wireless Network Security You can set up security for your projector to use on the wireless network. Set up one of the following
security options to match the settings used on your network:
• WEP encryption
• WPA...

6. When you finish selecting settings, select
Completeand follow the on-screen instructions to save
your settings and exit the menus.
Wireless Security Menu Settings
Parent topic: Wireless Network Projection
Wireless Security Menu Settings Settings on the Security menu let you select the type of security and security settings that match the
network you are connecting the projector to.
Setting OptionsDescription
Security WEPandWPA types available Selects the type of security used
on the wireless network...