Epson Projector PowerLite Home Cinema 3510 User Manual

2.
Connect theother endtoone ofthe projectors HDMIports.
 Note:
Ifyou connected agame console, itmay takeafew seconds foryour image toappear whenyou
 switch
tothe game consoles inputsource. Toreduce thepotential laginresponse timetogame
 commands,
setyour game consoles outputformat toaprogressive signalof480p, 720p,orhigher. See
 your
game console documentation forinstructions.
 You
canalso select theFast setting usingtheFast/Fine buttononthe remote controltoreduce lagtime.
 Note:
When anaudio/video...

3.
Connect theother endofthe cable toprojectors HDMI1/MHL portorthe WirelessHD transmitters
 HDMI
5/MHL (IN)port.
 Parent
topic:Connecting toVideo Sources
 Connecting
toaComponent VideoSource
 If
your video source hascomponent videoports, youcanconnect itto the projector usinganoptional
 component
videocable. Depending onyour component ports,youmay need touse anadapter cable
 along
withacomponent videocable.
 1.
Connect thecomponent connectorstoyour video sources color-coded componentvideooutput...

Note:
Ifyou connected agame console, itmay takeafew seconds foryour image toappear whenyou
 switch
tothe game consoles inputsource. Toreduce thepotential laginresponse timetogame
 commands,
setyour game consoles outputformat toaprogressive signalof480p, 720p,orhigher. See
 your
game console documentation forinstructions.
 You
canalso select theFast Image Processing settingtoreduce lagtime.
 Parent
topic:Connecting toVideo Sources
 Related
references
 Projector
FeatureSettings -Settings Menu
 Related...

Note:
Ifyou connected yourvideo source tothe projector usinganHDMI orMHL cable, theaudio signal
 is
transferred withthevideo signal; youdonot need anadditional cableforsound.
 1.
Connect theaudio cabletoyour video sources audio-out ports.
 2.
Connect theother endofthe cable tothe projectors Audioportorports.
 Note:
Toadd additional sound,connect yourvideo source andspeakers toan audio videoreceiver,
 then
connect thereceiver tothe projector usingoneofthe receivers compatible videooutputs (an
 HDMI...

1.
Ifnecessary, disconnectyourcomputers monitorcable.
 2.
Connect theVGA computer cabletoyour computers monitorport.
 3.
Connect theother endtoaPC port onthe projector.
 4.
Tighten thescrews onthe VGA connector.
 Parent
topic:Connecting toComputer Sources
 Related
tasks
 Connecting
toaComputer forSound
 Connecting
toaComputer forHDMI Video andAudio
 If
your computer hasanHDMI port,youcanconnect itto the projector usinganoptional HDMIcable.
 Note:
Toconnect aMac thatincludes onlyaMini DisplayPort,...

Parent
topic:Connecting toComputer Sources
 Connecting
toaComputer forSound
 If
your computer presentation includessoundandyoudidnot connect itusing theprojectors HDMIport,
 you
canstillplay sound through theprojectors speakersystem(PowerLite HomeCinema
 3500/3510/3600e).
Connectanoptional stereomini-jack adaptercable(withone3.5mm mini-plug and
 two
RCA plugs).
 1.
Connect theaudio cabletoyour laptops headphone oraudio-out jack,oryour desktops speakeror
 audio-out
port.
 2.
Connect theother endtothe...

4.
Connect thestereo mini-jack endofthe cable toyour projectors AudioOutport.
 Parent
topic:Projector Connections
 Connecting
toExternal USBDevices
 Follow
theinstructions inthese sections toconnect external USBdevices tothe projector.
 USB
Device Projection
 Connecting
aUSB Device orCamera tothe Projector
 Selecting
theConnected USBSource
 Disconnecting
aUSB Device orCamera FromtheProjector
 Parent
topic:Projector Connections
 USB
Device Projection
 You
canproject images andother content...

•
Formatted inFAT orFAT32
 •
Self-powered bytheir ownACpower supplies (bus-powered harddrives arenotrecommended)
 •
Avoid usingharddrives withmultiple partitions
 You
canproject slideshows fromimage filesonaconnected USBdevice ormemory cardreader.
 Parent
topic:Connecting toExternal USBDevices
 Related
references
 Supported
SlideshowFileTypes
 Connecting
aUSB Device orCamera tothe Projector
 You
canconnect yourUSB device orcamera tothe projectors USBType Aport anduseitto project
 images
andother...

2.
Press theUSB/LAN buttononthe remote control.
 3.
Press thebutton againtocycle through otherUSBsources, ifavailable.
 Parent
topic:Connecting toExternal USBDevices
 Disconnecting
aUSB Device orCamera FromtheProjector
 When
youfinish presenting withaconnected USBdevice orcamera, youmust prepare todisconnect the
 device
fromtheprojector.
 1.
Ifthe device hasapower button, turnoffand unplug thedevice.
 2.
Disconnect theUSB device orcamera fromtheprojector.
 Parent
topic:Connecting toExternal USBDevices...

2.
Insert thebatteries withthe+and –ends facing asshown.
 3.
Close thebattery coverandpress itdown untilitclicks intoplace.
 Warning:
Disposeofused batteries according tolocal regulations. Donot expose batteries toheat
 or
flame. Keepbatteries outofthe reach ofchildren; theyarechoking hazards andarevery
 dangerous
ifswallowed.
 Parent
topic:Setting Upthe Projector
 40