Epson Projector PowerLite Home Cinema 3000 User Manual

Power
light
 Status
light
 Lamp
light
 Temp
light
 Status
andsolution
 Flashing
blue
 Varies
 Flashing
 Off
 Replace
thelamp soon toavoid
 orange
 damage;
donot continue usingthe
 projector

Off
 Flashing
blue
 Off
 Flashing
 A
fan orsensor hasaproblem; turn
 orange
 the
projector off,unplug it,and
 contact
Epsonforhelp
 Off
 Flashing
blue
 Flashing
 Flashing
 Auto
Iriserror; turntheprojector off,
 orange
 orange
 unplug
it,and contact Epsonforhelp
 Off
 Flashing
blue
 Orange
 Orange
 Power...

Solutions
WhentheImage Contains NoiseorStatic
 Solutions
WhentheImage isFuzzy orBlurry
 Solutions
WhentheImage Brightness orColors areIncorrect
 Solutions
Whena3D Image DoesNotDisplay Correctly
 Solutions
WhenaWirelessHD SourceDoesNotDisplay Correctly
 Solutions
toSound Problems
 Parent
topic:Solving Problems
 Solutions
WhenNoImage Appears
 If
no image appears, trythe following solutions:
 •
Make surethelens capisoff.
 •
Press theA/V Mute button onthe remote controltosee ifthe image wastemporarily...

Solutions
WhenNo Signal Message Appears
 If
the No Signal message appears,trythe following solutions:
 •
Press theSource buttononthe projector repeatedly tocycle through theavailable sources.Waita
 few
seconds foranimage toappear.
 •
Turn onthe connected computerorvideo source, andpress itsplay button tobegin yourpresentation,
 if
necessary.
 •
Check theconnection fromtheprojector toyour video sources.
 •
Ifyou areprojecting fromalaptop computer, makesureitis set uptodisplay onanexternal monitor.
 •...

2.
Click theArrangement tab.
 3.
Select theMirror Displays checkbox.
 Parent
topic:Solutions WhenNo Signal Message Appears
 Solutions
WhenNot Supported Message Appears
 If
the Not Supported messageappears,trythe following solutions:
 •
Make surethecomputers displayresolution doesnotexceed theprojectors resolutionandfrequency
 limit.
Ifnecessary, selectadifferent displayresolution foryour computer. (Seeyourcomputer manual
 for
details.)
 Parent
topic:Solving ImageorSound Problems
 Related
references...

Related
concepts
 Image
Shape
 Related
tasks
 Adjusting
theImage Position UsingLensShift
 Solutions
WhentheImage Contains NoiseorStatic
 If
the projected imageseems tocontain electronic interference (noise)orstatic, trythe following
 solutions:

•
Check thecables connecting yourcomputer orvideo source tothe projector. Theyshould be:
 •
Separated fromthepower cordtoprevent interference
 •
Securely connected atboth ends
 •
Not connected toan extension cable
 •
No longer than10feet (3m) forVGA/computer...

Note:
Toavoid condensation onthe lens after bringing theprojector infrom acold environment, letthe
 projector
warmuptoroom temperature beforeusingit.
 •
Position theprojector closeenough tothe screen.
 •
Adjust theSharpness settingtoimprove imagequality.
 •
Ifany bands oroverall blurriness remain,displayauniformly patterned imageonthe screen and
 manually
adjusttheTracking andSync settings.
 •
Ifyou areprojecting fromacomputer, usealower resolution ortry tomatch theprojectors native
 resolution....

Related
concepts
 Projector
LampMaintenance
 Related
references
 Available
ColorModes
 Image
Quality Settings -Image Menu
 Projection
Distance
 Solutions
Whena3D Image DoesNotDisplay Correctly
 If
a 3D image doesnotdisplay correctly, trythe following solutions:
 •
Press the2D/3D buttononthe remote controltoswitch to3D mode, ifnecessary. Youcanalso
 activate
3Dmode bysetting the3DDisplay settingonthe Signal menutoOn .
 •
Make sureyourvideo device andmedia areboth 3D-compatible. Refertothe documentation...

Related
tasks
 Pairing
the3DGlasses withtheProjector
 Charging
the3DGlasses
 Solutions
WhenaWirelessHD SourceDoesNotDisplay Correctly
 If
a WirelessHD sourcedoesnotdisplay correctly, trythe following solutions:
 •
Make sureWirelessHD isselected asthe image source onthe projector.
 •
Open theWirelessHD receptionmonitorinthe Settings menuandcheck thestrength ofthe
 WirelessHD
signal.Ifthe signal isweak, youmay need tomove thetransmitter closertothe projector
 or
remove anylarge objects located between...

•
Press theA/V Mute button onthe remote controltoresume videoandaudio ifthey were temporarily
 stopped.

•
Press theSource buttononthe projector orasource buttononthe remote controltoswitch tothe
 correct
inputsource, ifnecessary.
 •
Check yourcomputer orvideo source tomake surethevolume isturned upand theaudio output isset
 for
the correct source.
 •
Check theaudio cableconnections betweentheprojector andyour video source.
 •
Ifyou donot hear sound fromanHDMI source, setthe connected devicetoPCM...

•
The power cordmaybedefective. Disconnect thecord andcontact Epson.
 •
Ifthe projectors lampshuts offunexpectedly, itmay have entered standby modeafteraperiod of
 inactivity.
Pressthepower button towake theprojector.
 •
Ifthe projectors lampshuts off,the Status lightisflashing blue,andtheTemp lightisorange, the
 projector
hasoverheated andshut off.Check thesolutions forthis light status.
 •
Ifthe power button onthe remote controldoesnotturn onthe projector, checkitsbatteries andmake
 sure
theRemote...