Epson Projector PowerLite 98H User Manual

3. Connect the other end to a
Computerport on the projector.
4. Tighten the screws on the VGA connector.
Parent topic: Connecting to Computer Sources
Related tasks
Connecting to a Computer for Sound
Connecting to a Computer for HDMI Video and Audio If your computer has an HDMI port, you can connect it to the projector using an optional HDMI cable.
Note:To connect a Mac that includes only a Mini DisplayPort, Thunderbolt port, or Mini-DVI port for
video output, you need to obtain an adapter that allows you...

Connecting to a Computer for USB Mouse Control
If you connected your computer to a Computer,USB-B, orHDMIport on the projector, you can set up
the remote control to act as a wireless mouse. This lets you control projection at a distance from your
computer. To do this, connect the projector to your computer using a USB cable, if it is not connected
already.
1. Connect the USB cable to your projectors USB-Bport.
2. Connect the other end to any available USB port on your computer.
3. If necessary, configure...

Parent topic:
Connecting to Computer Sources
Connecting to Video Sources Follow the instructions in these sections to connect video devices to the projector.
Connecting to an HDMI Video Source
Connecting to an MHL-Compatible Device
Connecting to a Component-to-VGA Video Source
Connecting to a Composite Video Source
Connecting to an S-Video Video Source
Connecting to a Video Source for Sound
Parent topic:Projector Connections
Connecting to an HDMI Video Source If your video source has an HDMI port, you...

1. Connect the MHL cable or adapter to your devices Micro-USB port.
2. If you are using an MHL adapter, connect it to an MHL-compatible HDMI cable.
3. Connect the other end of the cable to the projectors
HDMI2/MHLport.
Note: The projector converts the digital audio signal sent from your video source into a mono analog
signal for the internal speaker or a stereo analog signal if you are connecting to external speakers.
Parent topic: Connecting to Video Sources
Connecting to a Component-to-VGA Video Source...

Parent topic:
Connecting to Video Sources
Related references
Input Signal Settings - Signal Menu
Related tasks
Connecting to a Video Source for Sound
Connecting to a Composite Video Source If your video source has a composite video port, you can connect it to the projector using an optional
RCA-style video or A/V cable.
1. Connect the cable with the yellow connector to your video sources yellow video output port.
2. Connect the other end to the projectors Videoport.
Parent topic: Connecting to Video...

Parent topic:
Connecting to Video Sources
Related tasks
Connecting to a Video Source for Sound
Connecting to a Video Source for Sound You can play sound through the projectors speaker system if your video source has audio output ports.
If you are projecting video using a Computerport, connect the projector to the video source using an
optional stereo mini-jack audio cable.
If you are projecting video using the VideoorS-Video port, connect the projector to the video source
using an RCA audio cable.
Note:...

If you want to output images to an external monitor when the projector is turned off, you need to select
Communication On
as theStandby Mode setting andAlways On as theA/V Output setting in the
projectors menu system.
Note: Monitors that use a refresh rate less than 60 Hz may not be able to display images correctly.
1. Make sure your computer is connected to the projectors Computerport.
2. Connect the external monitors cable to your projectors Monitor Outport.
Parent topic: Projector Connections
Related...

3. Connect one end of the cable to your external speakers as necessary.
4. Connect the stereo mini-jack end of the cable to your projectors
Audio Outport.
Parent topic: Projector Connections
Related references
Projector Setup Settings - Extended Menu
Projector Setup Settings - ECO Menu
Connecting a Microphone You can connect a microphone to the projectors Micport to provide audio support during presentations
(PowerLite 97H/98H/99WH/955WH/965H).
Note: If you connect a condenser microphone with plug-in...

Related references
Projector Setup Settings - Extended Menu
Projector Setup Settings - ECO Menu
Connecting to External USB Devices Follow the instructions in these sections to connect external USB devices to the projector.
USB Device Projection
Connecting a USB Device or Camera to the Projector
Selecting the Connected USB Source
Disconnecting a USB Device or Camera From the Projector
Parent topic:Projector Connections
USB Device Projection You can project images and other content without using a computer...

Related topics
Projecting a PC Free Presentation
Connecting a USB Device or Camera to the Projector You can connect your USB device or camera to the projectors USB-Aport and use it to project images
and other content.
1. If your USB device came with a power adapter, plug the device into an electrical outlet.
2. Connect the USB cable (or USB flash drive or USB memory card reader) to the projectors USB-A
port.
Note: Do not connect a USB hub or a USB cable longer than 10 feet (3 m), or the device may not...