Epson Projector PowerLite 98H User Manual

You see the Users Logo zoom factor menu.
7. Select a zoom percentage and press Enter.
You see a prompt asking if you want to save the image as the Users Logo.
8. Select Yesand press Enter.
You see a completion message.
9. Press Escto exit the message screen.
10. Select the Extendedmenu and press Enter.
11. Select Displayand press Enter.
12. Select when you want to display the Users Logo screen: • To display it whenever there is no input signal, select Display Backgroundand set it toLogo.
• To display it...

Locking the Projectors Buttons
You can lock the buttons on the projectors control panel to prevent anyone from using the projector. You
can lock all the buttons or all the buttons except the power button.
1. Press theMenubutton.
2. Select the Settingsmenu and press Enter.
3. Select the Control Panel Lock setting and pressEnter.
4. Select one of these lock types and press Enter:
• To lock all of the projectors buttons, select Full Lock.
• To lock all buttons except the power button, select Partial Lock....

Installing a Security Cable
You can install two types of security cables on the projector to deter theft.
• Use the security slot on the projector to attach a Kensington lock. See your local computer orelectronics dealer for purchase information.
• Use the security cable attachment point on the projector to attach a wire cable and secure it to a room fixture or heavy furniture.
Note: Do not pass drop-prevention cables through the security cable attachment point when mounting
the projector on a wall or...

2. Press the
Menubutton, select the Settingsmenu, and press Enter.
3. Select the Patternsetting and press Enter.
4. Select the User Patternsetting and press Enter.
You see a prompt asking if you want to use the displayed image as a User Pattern.
5. Select Yesand press Enter.
Note: It takes a few moments for the projector to save the image; do not use the projector, its remote
control, or any connected equipment until it is finished.
You see a completion message.
6. Press Escto exit the message screen....

Caution:
Leave at least 2 feet (60 cm) of space between the projectors to prevent them from
overheating.
Setting the Projector ID
Setting the Remote Control ID
Matching Multiple-Projector Display Quality
Parent topic: Adjusting Projector Features
Setting the Projector ID If you want to control multiple projectors from a remote control, give each projector a unique ID.
1. Press theMenubutton.
2. Select the Extendedmenu and press Enter.
3. Select Projector ID and pressEnter.
4. Use the arrow buttons on the...

Setting the Remote Control ID
The remote controls ID is set to zero by default so it can operate any compatible projector. If you want to
set the remote control to operate only a particular projector, you need to set the remote controls ID to
match the projectors ID.
1. Turn on the projector you want the remote control to operate with exclusively.
2. Make sure you know the projectors ID number as set in the Extended menu Projector IDsetting.
Note: If you have forgotten the projectors ID, aim the remote...

Matching Multiple-Projector Display Quality
You can match the display quality of multiple projectors that will project next to each other.
1. Turn on all the projectors on which you want to match the display quality.
2. Set ID numbers on each projector.
3. Set the remote control ID to match the first projector.
4. Press theMenubutton, select the Imagemenu, and press Enter.
5. Select settings as necessary.
6. Set the remote control ID to match the next projector, then select Image menu adjustments as...

Note:
While you use the split screen feature, other projector features may not be available and some
settings may be automatically applied to both images.
1. Press the Splitbutton on the remote control.
The currently selected input source moves to the left side of the screen.
2. Press the Menubutton.
You see this screen:
3. To select an input source for the other image, select the Sourcesetting, press Enter, select the
input source, select Execute, and press Enter. (You can also change image sources, if...

Note:
Depending on the video input signals, the images may not appear at the same size even if you
choose the Equalsetting.
6. To choose the audio you want to hear, select the Audio Sourcesetting, pressEnter, select an
audio option, press Enter, and pressMenuto exit.
Note: Select Autoto hear audio from the largest screen or the left screen.
7. To exit the split screen feature, press the SplitorEsc button.
Parent topic: Adjusting Projector Features
Copying Menu Settings Between Projectors After you select...

2. Insert the flash drive into the
USB-Aport.
Note: Connect the flash drive directly to the projector. Do not use a hub.
3. Press and hold the Escbutton on the control panel or remote control as you connect the power cord
to the projectors power inlet.
4. When the power, Status, Lamp, and Temp lights turn on, release the Escbutton.
120