Epson Projector PowerLite 97H User Manual

7. Press the
LANbutton on the remote control or select Display the QR Codein the projectors
Network menu.
Your projector displays the QR code on the projection surface.
Note: If you do not see the QR code after pressing the LANbutton, press Enterto display it.
8. Start Epson iProjection on your mobile device.
9. Use the QR code reader feature to read the QR code and connect your device to the projector. Visit epson.com/projectorapp (U.S.) orepson.ca/projectorapp (Canada) for instructions.
Parent topic:...

Setting Up Wireless Network Security
You can set up security for your projector to use on the wireless network. Set up one of the following
security options to match the settings used on your network:
• WEP encryption
• WPA security
Note:Check with your network administrator for guidance on entering the correct information.
1. Press the Menubutton.
2. Select the Networkmenu and press Enter.
3. Select Network Configuration and pressEnter.
4. Select the Securitymenu and press Enter.
5. Select the security...

Wireless Security Menu Settings
Settings on the Security menu let you select the type of security and security settings that match the
network you are connecting the projector to.
Setting OptionsDescription
Security WPA2-PSKandWPA types Selects the type of security used
available on the wireless network
Passphrase Various keys from 8 to 32 Selects the pre-shared key used
characterson the network; passphrases are
case-sensitive
Parent topic: Setting Up Wireless Network Security
Setting Up Projector...

5. Turn on
Mail Notification.
6. Enter the IP address for the SMTP Serveroption.
Note: To enter the IP address using the numeric keys on the remote control, press and hold the
Num button. Do not use these addresses: 127.x.x.x or 224.0.0.0 through 255.255.255.255 (where x
is a number from 0 to 255).
7. Select a number for the SMTP server Port Number, from 1 to 65535 (default is 25).
8. Choose an Addressfield, enter the e-mail address, and select the alerts you want to receive there.
Repeat for up to three...

Setting Up Monitoring Using SNMP
Network administrators can install SNMP (Simple Network Management Protocol) software on network
computers so they can monitor projectors. If your network uses this software, you can set up the
projector for SNMP monitoring.
1. Press theMenubutton.
2. Select the Networkmenu and press Enter.
3. Select Network Configuration and pressEnter.
4. Select the Othersmenu and press Enter.
5. Enter up to two IP addresses to receive SNMP notifications, using 0 to 255 for each address...

Note:
Enabling Crestron RoomView disables the Epson Message Broadcast feature in the EasyMP
Monitor software.
9. If your network environment uses a Control4 or Control4 SDDP controller, turn on the Control4
SDDP setting to allow the projector to be detected.
10. If you are connecting to a network using Bonjour, turn on the Bonjoursetting.
11. If you want this projector to receive broadcasted messages over the network, turn on the Message
Broadcasting setting. Administrators can broadcast messages over...

Note:
If you connect from a web browser on a smartphone or tablet, a screen with two options is
displayed. Select remoteto display the Web Remote page, or select configto display the Web
Control page.
4. To select projector menu settings, select the name of the menu and follow the on-screen instructions.
5. To control projection remotely, select the Web Remoteoption.
You see a screen like this:
1 Power button control
2 Selects the Computerport source
67  

3 Selects
Video,S-Video, and HDMI/MHLport sources
4 Freeze button control
5 A/V Mute button control
6 Page Up andPage Down button controls
7 Searches for sources
8 Selects the network source
9 Selects the USB Display or USB device source
10 Volume button controls
11 Closed Caption control
12 Displays a QR code for connecting with iOS or Android devices using the Epson iProjection app
6. Select the icon corresponding to the projector function you want to control.
Parent topic: Using the Projector on a...

Setting Up Crestron RoomView Support
To set up your projector for monitoring and control using a Crestron RoomView system, make sure your
computer and projector are connected to the network. If you are connecting wirelessly, set up the
projector using the Advanced network connection mode.
Note:If you want to use the Crestron RoomView system when the projector is turned off, you need to
adjust the Standby Mode settings in the ECO menu.
1. Press the Menubutton.
2. Select the Networkmenu and press Enter.
3....

Parent topic:
Crestron RoomView Support
Controlling a Networked Projector Using Crestron RoomView Once you have set up your projector to use Crestron RoomView, you can control and monitor projection
using a compatible web browser.
1. Start your web browser on a computer connected to the network.
2. Type the projectors IP address into the browsers address box and press the computers Enterkey.
You see this screen:
3. Select the input source that you want to control in the Sources List box. You can scroll...