Epson Projector PowerLite 92 User Manual

							

3.
Toprevent changes tonetwork settings, selectNetwork Protect,press Enter,select On,press
 Enter
again, andpress Esc(PowerLite 93/95/96W/905/915W/935W/1835).
 You
canattach thePassword Protectstickertothe projector asan additional theftdeterrent.
 Note:
Besure tokeep theremote controlinasafe place; ifyou lose it,you willnot beable toenter the
 password
requiredtouse theprojector.
 Parent
topic:Password SecurityTypes
 Entering
aPassword toUse theProjector
 If
a password isset upand aPower OnProtect password isenabled, youseeaprompt toenter a
 password
whenever youturn onthe projector.
 You
must enter thecorrect password touse theprojector.
 101 
						

							

1.
Hold down theNum button onthe remote controlwhileyouenter thepassword usingthenumeric
 buttons.

The
password screencloses.
 2.
Ifthe password isincorrect, thefollowing mayhappen:
 •
You seeawrong password messageandaprompt totry again. Enterthecorrect password to
 proceed.

•
Ifyou enter anincorrect password severaltimesinsuccession, theprojector displaysarequest
 code
andamessage tocontact EpsonSupport. Whenyoucontact EpsonSupport, providethe
 displayed
requestcodeandproof ofownership forassistance inunlocking theprojector.
 Parent
topic:Password SecurityTypes
 Saving
aUser s Logo Image toDisplay
 You
cantransfer animage tothe projector andthen display itwhenever theprojector turnson.You can
 also
display theimage whentheprojector isnot receiving aninput signal orwhen youtemporarily stop
 projection
(usingtheA/V Mute feature). Thistransferred imageiscalled theUsers Logoscreen.
 The
image youselect asthe Users Logocanbeaphoto, graphic, orcompany logo,which isuseful in
 identifying
theprojectors ownertohelp deter theft.Youcanprevent changes tothe Users Logoby
 setting
uppassword protection forit.
 1.
Display theimage youwant toproject asthe Users Logo.
 2.
Press theMenu button, selecttheExtended menu,andpress Enter.
 PowerLite
92/93
 102  
						

							

PowerLite
95/96W/905/915W/935W/1835
 3.
Select theUsers Logosetting andpress Enter.
 You
seeaprompt askingifyou want touse thedisplayed imageasausers logo.
 4.
Select Yesandpress Enter.
 You
seeaselection boxoverlaying yourimage.
 5.
Use thearrow buttons onthe remote controltosurround theimage areayouwant touse asthe
 Users
Logoandpress Enter.
 103 
						

							

You
seeaprompt askingifyou want toselect thisimage area.
 6.
Select Yesandpress Enter.(If you want tochange theselected area,select No,press Enter,and
 repeat
thelast step.)
 You
seetheUsers Logozoom factor menu.
 7.
Select azoom percentage andpress Enter.
 You
seeaprompt askingifyou want tosave theimage asthe Users Logo.
 8.
Select Yesandpress Enter.
 Note:
Ittakes afew moments forthe projector tosave theimage; donot use theprojector, itsremote
 control,
orany connected equipment untilitis finished.
 You
seeacompletion message.
 9.
Press Esctoexit themessage screen.
 10.
Select theExtended menuandpress Enter.
 11.
Select Display andpress Enter.
 12.
Select whenyouwant todisplay theUsers Logoscreen:
 •
To display itwhenever thereisno input signal, selectDisplay Background andsetitto Logo .
 •
To display itwhenever youturn theprojector on,select Startup Screenandsetitto On .
 •
To display itwhenever youpress theA/V Mute button, selectA/VMute andsetitto Logo .
 To
prevent anyonefromchanging theUsers Logosettings withoutfirstentering apassword, seta
 password
andenable UsersLogosecurity.
 Parent
topic:Password SecurityTypes
 104 
						

							

Locking
theProjector s Buttons
 You
canlock thebuttons onthe projectors controlpaneltoprevent anyonefromusing theprojector. You
 can
lock allthe buttons orall the buttons exceptthepower button.
 1.
Press theMenu button.
 2.
Select theSettings menuandpress Enter.
 PowerLite
92/93
 PowerLite
95/96W/905/915W/935W/1835
 105 
						

							

3.
Select theControl PanelLocksetting andpress Enter.
 4.
Select oneofthese locktypes andpress Enter:
 •
To lock allofthe projectors buttons,selectFullLock .
 •
To lock allbuttons exceptthepower button, selectPartial Lock.
 You
seeaconfirmation prompt.
 5.
Select Yesandpress Enter.
 Unlocking
theProjector s Buttons
 Parent
topic:Projector SecurityFeatures
 Unlocking
theProjector s Buttons
 If
the projectors buttonshavebeen locked, holdtheEnter button onthe projectors controlpanelfor
 seven
seconds tounlock them.
 Parent
topic:Locking theProjector s Buttons
 Installing
aSecurity Cable
 You
caninstall twotypes ofsecurity cablesonthe projector todeter theft.
 •
Use thesecurity slotonthe back ofthe projector toattach aKensington MicrosaverSecuritysystem,
 available
fromEpson.
 •
Use thesecurity cableattachment pointonthe projector toattach awire cable andsecure itto aroom
 fixture
orheavy furniture.
 106  
						

							

Parent
topic:Projector SecurityFeatures
 Creating
aUser Pattern toDisplay
 You
cantransfer animage tothe projector andthen display itas apattern toaid inpresentations when
 you
usethePattern Display feature. Thistransferred imageiscalled theUser Pattern.
 1.
Display theimage youwant toproject asthe User Pattern fromaconnected computerorvideo
 source.

2.
Press theMenu button, selecttheSettings menu,andpress Enter.
 PowerLite
92/93
 PowerLite
95/96W/905/915W/935W/1835
 107 
						

							

3.
Select thePattern settingandpress Enter.
 4.
Select theUser Pattern settingandpress Enter.
 You
seeaprompt askingifyou want touse thedisplayed imageasaUser Pattern.
 5.
Select Yesandpress Enter.
 Note:
Ittakes afew moments forthe projector tosave theimage; donot use theprojector, itsremote
 control,
orany connected equipment untilitis finished.
 You
seeacompletion message.
 6.
Press Esctoexit themessage screen.
 Parent
topic:Adjusting ProjectorFeatures
 Related
references
 Projector
FeatureSettings -Settings Menu
 108 
						

							

Adjusting
theMenu Settings
 Follow
theinstructions inthese sections toaccess theprojector menusystem andchange projector
 settings.

Note:
TheNetwork menudoesnotappear onnon-network projectormodels.
 Using
theProjector s Menus
 Image
Quality Settings -Image Menu
 Input
Signal Settings -Signal Menu
 Projector
FeatureSettings -Settings Menu
 Projector
SetupSettings -Extended Menu
 Projector
NetworkSettings-Network Menu
 Projector
Information Display-Info Menu
 Projector
ResetOptions -Reset Menu
 Using
theProjector s Menus
 You
canusetheprojectors menustoadjust thesettings thatcontrol howyour projector works.The
 projector
displaysthemenus onthe screen.
 1.
Press theMenu button onthe control panelorremote control.
 109  
						

							

You
seethemenu screen displaying theImage menusettings.
 2.
Press theupordown arrow buttons tomove through themenus listedonthe left. The settings for
 each
menu aredisplayed onthe right.
 Note:
Theavailable settingsdependonthe current inputsource.
 3.
Tochange settings inthe displayed menu,pressEnter.
 4.
Press theupordown arrow button tomove through thesettings.
 5.
Change thesettings usingthebuttons listedonthe bottom ofthe menu screens.
 6.
Toreturn allthe menu settings totheir default values, selectReset.
 7.
When youfinish changing settingsonamenu, pressEsc.
 110