Epson Projector PowerLite 740HD User Manual

							

Related
references
 Optional
Equipment andReplacement Parts
 Using
Quick Wireless Connection (WindowsOnly)
 You
canusetheQuick Wireless Connection USBkeytoquickly connect yourcomputer tothe projector
 wirelessly.
Thenyoucanproject yourpresentation andremove thekey when youaredone.
 Note:
TheQuick Wireless Connection USBkeyisnot included withyour projector andisoptional.
 Note:
Makesurethewireless LANmodule isinstalled. Thewireless LANmodule isnot included with
 your
projector andisoptional.
 1.
Turn onthe projector.
 2.
Press theLAN button onthe remote control.
 You
seeascreen likethis:
 3.
Verify thatanSSID andIPaddress aredisplayed, thenremove thewireless LANmodule fromthe
 projector.

51 
						

							

4.
Insert theQuick Wireless Connection USBkeyinto thesame portused forthe wireless LANmodule.
 You
seeaprojected messagethatthenetwork information updateiscomplete.
 5.
Remove theUSB key.
 6.
Reinsert thewireless LANmodule intotheprojector.
 7.
Connect theUSB keytoaUSB portonyour computer orlaptop.
 Note:
InWindows Vista,ifyou seetheAutoPlay window,selectRunLaunchQWRD.exe ,then
 select
Allow onthe next screen.
 8.
Follow theon-screen instructions toinstall theQuick Wireless Connection driver.
 Note:
Ifyou seeaWindows Firewallmessage, clickYestodisable thefirewall forthis application.
 After
afew minutes, yourcomputer imageisdisplayed bythe projector. Ifitdoes notappear, press
 the
LAN button onyour remote controlorrestart yourcomputer.
 9.
Run your presentation asnecessary.
 10.
When youfinish projecting wirelessly, selecttheSafely Remove Hardware optioninthe Windows
 taskbar,
thenremove theUSB keyfrom yourcomputer.
 Note:
Youmay need torestart yourcomputer toreactivate yourwireless LANconnection.
 Parent
topic:Wireless NetworkProjection
 52  
						

							

Related
references
 Optional
Equipment andReplacement Parts
 Selecting
WirelessNetworkSettingsManually
 Before
youcanproject fromyourwireless network, youmust select thenetwork settingsforthe projector
 using
itsmenu system.
 1.
Turn onthe projector.
 2.
Press theMenu button.
 3.
Select theNetwork menuandpress Enter.
 4.
Make suretheWireless Modeoption isset toWireless LANOn.
 5.
Select Network Configuration andpress Enter.
 53 
						

							

6.
Select theBasic menuandpress Enter.
 7.
Select thefollowing basicoptions asnecessary:
 •
Projector Nameletsyou enter aname upto16 alphanumeric characterslongtoidentify the
 projector
overthenetwork.
 •
Web Control Password letsyou enter apassword upto8alphanumeric characterslongfor
 accessing
theprojector overtheweb. (Default username isEPSONWEB ;default password is
 admin
.)
 •
Projector Keywordletsyou turn onasecurity password toprevent accesstothe projector by
 anyone
notinthe room withit.The projector displaysarandom keyword thatyoumust enter from
 a
computer usingtheEasyMP NetworkProjection softwareoran iOS orAndroid deviceusing
 iProjection.

•
Display LANInfoletsyou select howtheprojector displaysnetworkinformation. Youcanselect
 an
option todisplay aQR code thatletsyou quickly connect youriOSorAndroid devicesusingthe
 Epson
iProjection app.
 Note:
Usethedisplayed keyboardtoenter thename, passwords andkeyword. Pressthearrow
 buttons
onthe remote controltohighlight characters andpress Enter toselect them.
 54 
						

							

8.
Select theWireless LANmenu andpress Enter.
 9.
Select thesettings onthe Wireless LANmenu asnecessary foryour network.
 10.
When youfinish selecting settings,selectComplete andfollow theon-screen instructions tosave
 your
settings andexitthemenus.
 After
youcomplete thewireless settingsforyour projector, youneed toselect thewireless networkon
 your
computer ,or iOS orAndroid device.
 Wireless
LANMenu Settings
 Parent
topic:Wireless NetworkProjection
 Wireless
LANMenu Settings
 Setting
 Options
 Description

Connection
Mode
 Quick
 Selects
thetype ofwireless
 connection:

Advanced

Quick
:lets you quickly connect
 to
one computer oruse the
 optional
QuickWireless
 Connection
USBkeytoconnect
 Advanced
:lets you connect to
 multiple
computers viaawireless
 network
accesspoint
 55 
						

							

Setting
 Options
 Description

Channel
 1ch
 In
Quick connection mode,
 selects
thefrequency band
 6ch

(channel)
usedbythe wireless
 11ch

LAN

SSID
 Up
32alphanumeric characters
 Sets
theSSID (network name)of
 the
wireless LANsystem the
 projector
isconnecting to
 Search
Access Point
 —
 Lets
yousearch foravailable
 wireless
networkaccesspointsin
 Advanced
connection mode
 IP
Settings
 DHCP
 In
Advanced connection mode,
 select
DHCP ifyour network
 IP
Address
 assigns
addresses automatically,
 Subnet
Mask
 or
manually enterthenetworks
 IP
Address ,Subnet Mask,and
 Gateway
Address
 Gateway
Address
 SSID
Display
 On
 Selects
whether todisplay the
 SSID
onthe network standby
 Off

screen

IP
Address Display
 On
 Selects
whether todisplay theIP
 address
onthe network standby
 Off

screen

Parent
topic:Selecting WirelessNetworkSettingsManually
 Using
aQR Code toConnect aMobile Device
 After
youselect thewireless networksettingsforyour projector, youcandisplay aQR code onthe
 screen
anduseitto connect amobile deviceusingtheEpson iProjection app.
 Note:
Makesureyouhave installed thelatest version ofEpson iProjection onyour device. Visit
 epson.com/projectorapp
(U.S.)orepson.ca/projectorapp (Canada)formore information.
 1.
Press theMenu button.
 56 
						

							

2.
Select theNetwork menuandpress Enter.
 3.
Select Network Configuration andpress Enter.
 4.
Select theBasic menuandpress Enter.
 5.
SettheDisplay LANInfosetting toText &QR Code .
 6.
Select Complete andfollow theon-screen instructions tosave yoursettings andexitthemenus.
 57 
						

							

7.
Press theLAN button onthe remote controlorselect Display theQRCode inthe projectors
 Network
menu.
 Your
projector displaystheQR code onthe projection surface.
 Note:
Ifyou donot see theQR code afterpressing theLAN button, pressEnter todisplay it.
 8.
Start Epson iProjection onyour mobile device.
 9.
Use theQR code reader feature toread theQR code andconnect yourdevice tothe projector. Visit
 epson.com/projectorapp
(U.S.)orepson.ca/projectorapp (Canada)forinstructions.
 Parent
topic:Wireless NetworkProjection
 Selecting
WirelessNetworkSettingsinWindows
 Before
connecting tothe projector, selectthecorrect wireless networkonyour computer.
 1.
Toaccess yourwireless utilitysoftware, accesstheDesktop anddouble-click thenetwork iconon
 the
Windows taskbar.
 2.
Doone ofthe following:
 •
Ifyour projector isset uponanexisting network (Advanced mode),selectthenetwork name
 (SSID).

•
Ifyour projector isconfigured forQuick mode, selecttheprojectors SSID.
 3.
Click Connect .
 Parent
topic:Wireless NetworkProjection
 Selecting
WirelessNetworkSettingsinOS X
 Before
connecting tothe projector, selectthecorrect wireless networkinOS X.
 1.
Click theAirPort icononthe menu baratthe topofthe screen.
 2.
Make sureAirPort isturned on,then doone ofthe following:
 •
Ifyour projector isset uponanexisting network (Advanced mode),selectthenetwork name
 (SSID).

•
Ifyour projector isconfigured forQuick mode, selecttheprojectors SSID.
 Parent
topic:Wireless NetworkProjection
 58 
						

							

Setting
UpWireless NetworkSecurity
 You
cansetupsecurity foryour projector touse onthe wireless network. Setupone ofthe following
 security
optionstomatch thesettings usedonyour network:
 •
WPA/WPA2-PSK security(Advanced connection mode)
 •
WPA2-PSK security(Quickconnection mode)
 Check
withyour network administrator forguidance onentering thecorrect information.
 1.
Press theMenu button.
 2.
Select theNetwork menuandpress Enter.
 3.
Select Network Configuration andpress Enter.
 4.
Select theSecurity menuandpress Enter.
 5.
Select thesecurity settingsforyour network.
 Note:
TKIPandAES encryption aresupported. WPAauthentication viaanauthentication serveris
 not
supported.
 6.
When youfinish selecting settings,selectComplete andfollow theon-screen instructions tosave
 your
settings andexitthemenus.
 Wireless
SecurityMenuSettings
 Parent
topic:Wireless NetworkProjection
 59 
						

							

Related
tasks
 Selecting
WirelessNetworkSettingsManually
 Wireless
SecurityMenuSettings
 Settings
onthe Security menuletyou select thetype ofsecurity andsecurity settingsthatmatch the
 network
youareconnecting theprojector to.
 Setting
 Options
 Description

Security
 WPA2-PSK
andWPA types
 Selects
thetype ofsecurity used
 available
 on
the wireless network
 Passphrase
 Various
keysfrom8to 32
 Selects
thepre-shared keyused
 characters
 on
the network; passphrases are
 case-sensitive

Parent
topic:Setting UpWireless NetworkSecurity
 Setting
UpProjector NetworkE-MailAlerts
 You
cansetupthe projector tosend youane-mail alertover thenetwork ifthere isaproblem withthe
 projector.

1.
Press theMenu button.
 2.
Select theNetwork menuandpress Enter.
 3.
Select Network Configuration andpress Enter.
 60