Epson Projector PowerLite 570 User Manual

Connecting
toaComputer forUSB Mouse Control
 Connecting
toaComputer forSound
 Parent
topic:Projector Connections
 Connecting
toaComputer forUSB Video andAudio
 If
your computer meetsthesystem requirements, youcansend video andaudio output tothe projector
 through
thecomputers USBport(preferably USB2.0).Connect theprojector toyour computer usinga
 USB
cable.
 1.
Turn onyour computer.
 2.
Connect thecable toyour projectors USB-Bport.
 3.
Connect theother endtoany available USBportonyour computer.
 4....

The
projector displaystheimage fromyourcomputers desktopandoutputs sound,ifyour presentation
 contains
audio.
 Parent
topic:Connecting toComputer Sources
 Connecting
toaComputer forVGA Video
 You
canconnect theprojector toyour computer usingaVGA computer cable.
 Note:
Toconnect aMac thatincludes onlyaMini DisplayPort, Thunderboltport,orMini-DVI portfor
 video
output, youneed toobtain anadapter thatallows youtoconnect tothe projectors VGAvideo port.
 Contact
Appleforcompatible adapteroptions.
 1....

Contact
Appleforcompatible adapteroptions. OlderMaccomputers (2009andearlier) maynotsupport
 audio
through theHDMI port.
 1.
Connect theHDMI cabletoyour computers HDMIoutput port.
 2.
Connect theother endtoone ofthe projectors HDMIports.
 Note:
Theprojector convertsthedigital audiosignal sentfrom yourcomputer intoamono analog signal
 for
the internal speaker orastereo analog signalifyou areconnecting toexternal speakers.
 Parent
topic:Connecting toComputer Sources
 Connecting
toaComputer forUSB Mouse...

2.
Connect theother endtoany available USBportonyour computer.
 3.
Ifnecessary, configureyourcomputer towork withanexternal USBmouse. Seeyour computer
 documentation
fordetails.
 Parent
topic:Connecting toComputer Sources
 Related
references
 Projector
Parts-Remote Control
 Related
tasks
 Using
theRemote ControlasaWireless Mouse
 Connecting
toaComputer forSound
 If
your computer presentation includessoundandyoudidnot connect itto the projectors USB-Boran
 HDMI
port,youcanstillplay sound through...

Connecting
toaComposite VideoSource
 Connecting
toan S-Video VideoSource
 Connecting
toaVideo Source forSound
 Parent
topic:Projector Connections
 Connecting
toan HDMI Video Source
 If
your video source hasanHDMI port,youcanconnect itto the projector usinganoptional HDMIcable.
 The
HDMI connection providesthebest image quality.
 1.
Connect theHDMI cabletoyour video sources HDMIoutput port.
 2.
Connect theother endtoone ofthe projectors HDMIports.
 Note:
Theprojector convertsthedigital audiosignal...

3.
Connect theother endofthe cable tothe projectors HDMI1/MHL port.
 Note:
Theprojector convertsthedigital audiosignal sentfrom yourvideo source intoamono analog
 signal
forthe internal speaker orastereo analog signalifyou areconnecting toexternal speakers.
 Parent
topic:Connecting toVideo Sources
 Connecting
toaComponent-to-VGA VideoSource
 If
your video source hascomponent videoports, youcanconnect itto the projector usinganoptional
 component-to-VGA
videocable. Depending onyour component...

Note:
Ifyou choose theComputer2 port,youmay need tochange theMonitor OutPort setting in
 the
projectors Extendedmenu.
 3.
Tighten thescrews onthe VGA connector.
 If
your image colorsappear incorrect, youmay need tochange theInput Signal settinginthe projectors
 Signal
menu.
 Parent
topic:Connecting toVideo Sources
 Related
references
 Input
Signal Settings -Signal Menu
 Connecting
toaComposite VideoSource
 If
your video source hasacomposite videoport,youcanconnect itto the projector usinganoptional...

2.
Connect theother endtothe projectors S-Videoport.
 Parent
topic:Connecting toVideo Sources
 Connecting
toaVideo Source forSound
 You
canplay sound through theprojectors speakersystemifyour video source hasaudio output ports.
 If
you areprojecting videousingtheVideo ,S-Video ,or aComputer port,connect theprojector tothe
 video
source usinganoptional stereomini-jack audiocable.
 Note:
Ifyou connected yourvideo source tothe projector usinganHDMI cable, theaudio signal is
 transferred
withthevideo...

Connecting
toan External Computer Monitor
 If
you connected theprojector toacomputer usingaComputer port,youcanalso connect anexternal
 monitor
tothe projector. Thisletsyou seeyour presentation onthe external monitorevenwhen the
 projected
imageisnot visible.
 If
you want tooutput images toan external monitorwhentheprojector isturned off,you need toselect
 Communication
Onforthe Standby Modesetting andAlways Onforthe A/V Output settinginthe
 projectors
menusystem.
 Note:
Monitors thatusearefresh...

If
you want tooutput audiofromtheexternal speakers whentheprojector isturned off,you need to
 select
Communication Onforthe Standby Modesetting andAlways Onforthe A/V Output settingin
 the
projectors menusystem.
 Note:
Theprojectors built-inspeaker systemisdisabled whenyouconnect external speakers.
 1.
Make sureyourcomputer orvideo source isconnected tothe projector withboth audio andvideo
 cables
asnecessary.
 2.
Locate theappropriate cabletoconnect yourexternal speakers, suchasastereo...