Epson Projector PowerLite 525W User Manual

6.
Press Menu orEsc toexit themenus.
 Parent
topic:Projector LampMaintenance
 Related
references
 Projector
ResetOptions -Reset Menu
 Related
tasks
 Replacing
theLamp
 Replacing
theRemote ControlBatteries
 The
remote controlusestwoAAmanganese oralkaline batteries. Replacethebatteries assoon asthey
 run
out.
 Caution:
Useonly thetype ofbatteries specified inthis manual. Donot install batteries ofdifferent types,
 or
mix new andoldbatteries.
 1.
Remove thebattery coverasshown.
 2.
Remove...

3.
Insert thebatteries withthe+and –ends facing asshown.
 4.
Replace thebattery coverandpress itdown untilitclicks intoplace.
 Warning:
Disposeofused batteries according tolocal regulations. Donot expose batteries toheat
 or
flame. Keepbatteries outofthe reach ofchildren; theyarechoking hazards andarevery
 dangerous
ifswallowed.
 Parent
topic:Projector Maintenance
 Transporting
theProjector
 The
projector containsprecision parts,someofwhich areglass. Follow theseguidelines totransport,
 ship,
orstore...

•
When transporting theprojector along distance oras checked luggage, packitin afirm boxwith
 cushioning
arounditand mark thebox Fragile.
 •
When shipping theprojector forrepairs, placeitin its original packing materials, ifpossible, oruse
 equivalent
materialswithcushioning aroundtheprojector. Markthebox Fragile.
 Note:
Epson shallnotbeliable forany damages incurredduringtransportation.
 Parent
topic:Maintaining andTransporting theProjector
 143 

Solving
Problems
 Check
thesolutions inthese sections ifyou have anyproblems usingtheprojector.
 Projection
ProblemTips
 Projector
LightStatus
 Using
theProjector HelpDisplays
 Solving
ImageorSound Problems
 Solving
Projector orRemote ControlOperation Problems
 Solving
Network Problems
 Where
toGet Help
 Projection
ProblemTips
 If
the projector isnot working properly, tryturning itoff and unplugging it.Then plugitback inand turn it
 on.

If
this does notsolve theproblem, checkthefollowing:
 •
The...

Projector
LightStatus
 The
lights onthe projector indicatetheprojector statusandletyou know when aproblem occurs.Check
 the
status andcolor ofthe lights andlook forasolution inthe table here.
 1
 Power
light
 2
 Status
light
 3
 Lamp
light
 4
 Temp
(temperature) light
 Power
light
 Status
light
 Lamp
light
 Temp
light
 Status
andsolution
 Blue
 Blue
 Off
 Off
 Normal
operation.
 Blue
 Flashing
blue
 Off
 Off
 Warming
up.Wait foranimage to
 appear.

Blue
 Off
 Off
 Off
 Standby
orsleep mode.
 Blue...

Power
light
 Status
light
 Lamp
light
 Temp
light
 Status
andsolution
 Blue
 Varies
 Off
 Flashing
 Projector
istoo hot.
 orange

•
Make surethatthevents andair
 filter
arenotclogged withdust or
 obstructed
bynearby objects.
 •
Clean orreplace theairfilter.
 •
Make suretheenvironmental
 temperature
isnot toohot.
 Off
 Flashing
blue
 Off
 Orange
 Projector
hasoverheated andturned
 off.
Leave itturned offtocool down.
 After
about fiveminutes, dothe
 following:

•
Make surethatthevents andair
 filter...

Power
light
 Status
light
 Lamp
light
 Temp
light
 Status
andsolution
 Flashing
blue
 Varies
 Flashing
 Varies
 Replace
thelamp soon toavoid
 orange
 damage.
Donot continue usingthe
 projector.

Off
 Flashing
blue
 Off
 Flashing
 A
fan orsensor hasaproblem. Turn
 orange
 the
projector off,unplug it,and
 contact
Epsonforhelp.
 Off
 Flashing
blue
 Flashing
 Flashing
 Auto
Iriserror. Turntheprojector off,
 orange
 orange
 unplug
it,and contact Epsonforhelp.
 Off
 Flashing
blue
 Orange
 Orange
 Power...

5.
When youarefinished, doone ofthe following:
 •
To select another problem tosolve, pressEsc.
 •
To exit thehelp system, pressHelp.
 Parent
topic:Solving Problems
 Solving
ImageorSound Problems
 Check
thesolutions inthese sections ifyou have anyproblems withprojected imagesorsound.
 Solutions
WhenNoImage Appears
 Solutions
WhenImage isIncorrect UsingtheUSB Display Function
 Solutions
WhenNo Signal Message Appears
 Solutions
WhenNot Supported Message Appears
 Solutions
WhenOnlyaPartial ImageAppears...

•
Ifthe projector doesnotrespond whenyoupress thecontrol panelbuttons, thebuttons maybe
 locked.
Unlockthebuttons.
 •
Ifthe projector doesnotrespond whenyoupress buttons onthe remote control, makesuretheremote
 receivers
areturned on.
 •
For images projected withWindows MediaCenter, reducethescreen sizefrom fullscreen mode.
 •
For images projected fromapplications usingWindows DirectX,turnoffDirectX functions.
 Parent
topic:Solving ImageorSound Problems
 Related
references
 Projector
SetupSettings...

Solutions
WhenNo Signal Message Appears
 If
the No Signal message appears,trythe following solutions:
 •
Press theSource Searchbuttonandwait afew seconds foranimage toappear.
 •
Turn onthe connected computerorvideo source, andpress itsplay button tobegin yourpresentation,
 if
necessary.
 •
Check theconnection fromtheprojector toyour video sources.
 •
Ifyou areprojecting fromalaptop computer, makesureitis set uptodisplay onanexternal monitor.
 •
Ifnecessary, turntheprojector andtheconnected...