Epson Projector PowerLite 5040UB User Manual

71
1.
Turn onthe projector anddisplay animage.
 2.
Press theMenu button.
 3.
Select theExtended menuandpress Enter.
 4.
Select theProjection settingandpress Enter.
 5.
Select aprojection modeandpress Enter.
 6.
Press Menu orEsc toexit themenus.
 Parent
topic:Projection Modes
 Related
concepts
 Projector
Placement
 Image
Aspect Ratio
 The
projector candisplay images indifferent width-to-height ratioscalled aspect ratios.Normally the
 input
signal fromyourvideo source determines theimages...

72
Changing
theImage Aspect Ratio
 You
canchange theaspect ratioofthe displayed imagetoresize it.
 Note:
ForHDMI sources, theinput signal determines theimages aspectratio.
 1.
Turn onthe projector andswitch tothe image source youwant touse.
 2.
Press theAspect buttononthe remote control.
 A
list ofthe available aspectratiosappears.
 3.
Tocycle through theavailable aspectratiosforyour input signal, presstheupordown arrow button.
 4.
Press Entertoselect theaspect ratio.
 Parent
topic:Image Aspect Ratio...

73
Aspect
ratiosetting
 Description

Full
 Displays
imagesusingthefullwidth ofthe projection area,butdoes
 not
maintain theaspect ratio.
 Note:
When projecting a4K signal, youcanselect onlyNormal asthe aspect ratiosetting.
 Parent
topic:Image Aspect Ratio
 Color
Mode
 The
projector offersdifferent ColorModes toprovide optimum brightness, contrast,andcolor fora
 variety
ofviewing environments andimage types.Youcanselect amode designed tomatch yourimage
 and
environment, orexperiment withtheavailable...

74
4.
Tocycle through allthe available ColorModes foryour input signal, presstheupordown arrow
 button.

5.
Press Entertoselect aColor Mode.
 Parent
topic:ColorMode
 Available
ColorModes
 You
cansetthe projector touse these ColorModes, depending onthe input source youareusing:
 2D
Images
 Color
Mode
 Description

Dynamic
 Best
forprojecting inabright room
 Natural
 Best
forprojecting inadark room
 Bright
Cinema
 Best
forprojecting inaroom withclosed curtains
 Cinema
 Best
forprojecting colormovies...

75
3.
Select theImage menuandpress Enter.
 4.
Select theAuto Irissetting andchoose oneofthe following:
 •
High Speed toadjust brightness assoon asthe scene changes.
 •
Normal forstandard brightness adjustment.
 Note:
YoucansetAuto Irisforeach Color Mode thatsupports thefeature.
 5.
Press Menu orEsc toexit themenus.
 Parent
topic:ColorMode 

76
Adjusting
ProjectorFeatures
 Follow
theinstructions inthese sections touse your projectors featureadjustments.
 Shutting
Offthe Picture Temporarily
 Using
Picture inPicture
 Adjusting
theColor Convergence (PanelAlignment)
 Adjusting
theColor Tone(Color Uniformity)
 Projector
SecurityFeatures
 Saving
Settings toMemory andUsing Saved Settings
 Saving
theLens Position andUsing Saved LensPositions
 Shutting
Offthe Picture Temporarily
 You
cantemporarily turnoffthe projected pictureifyou want toredirect...

77
1.
Turn onthe projector andswitch tothe HDMI orWirelessHD imagesource youwant touse.
 2.
Press theP-in-P buttononthe remote control.
 The
second HDMIvideosource appears asasub-screen inthe corner ofthe image.
 Note:
WhilePicture inPicture modeisactive, presstheMenu button onthe remote controltoadjust
 the
size andposition ofthe sub-screen.
 3.
Toswap themain screen andsub-screen videosources, pressandhold theP-in-P buttonforat
 least
three seconds.
 4.
Press theP-in-P buttonagaintoclose...

78
Adjusting
theColor Convergence (PanelAlignment)
 You
canusethePanel Alignment featuretomanually adjustthecolor convergence (thealignment ofthe
 red,
green andblue colors) inthe projected image.
 Note:
Allowyourprojector towarm upfor atleast 10to15 minutes andmake suretheimage isin focus
 before
youusethePanel Alignment feature.Theprojected imageshould beaminimum of60 inches
 (152
cm)diagonally andtheprojection surfaceshouldnotbecolored ortextured, otherwise the
 adjustment
gridswillbedifficult...

79
•
Bto adjust theblue color convergence.
 Note:
Youcanonly adjust thered orblue color convergence. Greenisthe standard colorpanel and
 cannot
beadjusted.
 8.
Select thePattern Colorsetting andpress Enter.
 9.
Select thepattern youwant touse and press Enter.
 10.
Select StartAdjustments andpress Enter.
 You
seethisscreen:
 11.
Press Enter.
 You
seeascreen likethis: 

80
12.
Use thearrow buttons onthe remote controltoadjust thecolor alignment ofthe color youselected
 for
the Select Colorsetting.
 Note:
Youradjustments affectthegridlines inthe entire screen. Youcanfine-tune youradjustments
 by
continuing withthenext steps.
 13.
When youarefinished adjusting thescreen, pressEnter.
 You
seethisscreen:
 14.
Select Adjust thefour corners andpress Enter.
 15.
Use thearrow buttons onthe remote controltoadjust thecolor alignment inthe corner ofthe screen
 highlighted
bythe...