Epson Projector PowerLite 5030UBe User Manual

							

4.
Slide thepower switch onthe 3Dglasses tothe Onposition.
 5.
Move theglasses within10feet (3m) ofthe projector, thenholddown thePairing buttononthe
 glasses
foratleast three seconds.
 The
status lightonthe glasses flashesgreenandred. Ifpairing issuccessful, thelight turns green
 for
10seconds andthen turns off.
 Parent
topic:Viewing 3DImages
 Charging
the3DGlasses
 Charge
theglasses whenthestatus lightonthe glasses flashesredtoindicate alow battery.
 41   
						

							

1.
Connect thesmaller endofthe charging cabletothe port onthe bridge ofthe glasses.
 Note:
Makesureyouconnect thecable inthe correct orientation oryou may damage theglasses or
 cable.

2.
Doone ofthe following:
 •
Plug theother endofthe charging cableintoapowered USBportonacomputer orother device.
 •
Plug theother endofthe charging cableintoaUSB-to-AC adapterwiththefollowing
 specifications:

Input:
100-240V, ~0.15A,50-60Hz
 Output:
5V=1A
 The
glasses arefully charged whenthestatus lightonthe glasses staysgreen.
 Parent
topic:Viewing 3DImages
 3D
Viewing Range
 When
youview 3Dimages, makesureyouarepositioned withintheviewing rangeshown here.
 42  
						

							

1
 32
ft(10 m)
 Parent
topic:Viewing 3DImages
 Selecting
theLanguage forthe Projector Menus
 If
you want toview theprojectors menusandmessages inanother language, youcanchange the
 Language
setting.
 1.
Turn onthe projector.
 2.
Press theMenu button.
 43  
						

							

3.
Select theExtended menuandpress Enter.
 4.
Select theLanguage settingandpress Enter.
 5.
Select thelanguage youwant touse and press Enter.
 6.
Press Menu orEsc toexit themenus.
 Parent
topic:UsingBasicProjector Features
 Adjusting
theImage Height
 If
you areprojecting fromatable orother flatsurface, andtheimage istoo high orlow, youcanadjust
 the
image heightusingtheprojectors adjustablefeet.
 1.
Turn onthe projector anddisplay animage.
 2.
Ifthe image istilted, rotate thefront feettoadjust theirheight.
 3.
Use thevertical andhorizontal lensshiftdials onthe projector toadjust theposition ofthe projected
 image
asnecessary.
 44  
						

							

If
the projected imageisunevenly rectangular, youneed toadjust theimage shape.
 Adjusting
theImage Position UsingLensShift
 Parent
topic:UsingBasicProjector Features
 Related
concepts
 Image
Shape
 Adjusting
theImage Position UsingLensShift
 If
you cannot installtheprojector directlyinfront ofthe screen, youcanadjust theposition ofthe
 projected
imageusingthelens shiftfeature.
 Note:
Wait30minutes afterturning onthe projector beforesetting thefocus, zoom, andlens shiftfor
 maximum
accuracy.
 1.
Turn onthe projector anddisplay animage.
 2.
Turn thevertical andhorizontal lensshiftdials onthe projector toadjust theposition ofthe projected
 image
asnecessary.
 Note:
Youcannot movetheimage toboth thehorizontal andvertical maximum values.
 45 
						

							

1
 Horizontal
height×47%
 2
 Vertical
height×96%
 Follow
theseguidelines whenusinglensshifttoadjust yourimages:
 •
When adjusting theimage height, position theimage lowerthanwhere youwant itto be and then
 move
itup using thevertical lensshiftdial. This willhelp prevent theimage frommoving downafter
 adjustment.

•
Keeping thevertical andhorizontal lensshiftdials intheir center positions produces theclearest
 picture.

Parent
topic:Adjusting theImage Height
 46  
						

							

Image
Shape
 You
canproject anevenly rectangular imagebyplacing theprojector directlyinfront ofthe center ofthe
 screen
andkeeping itlevel. Ifyou place theprojector atan angle tothe screen, ortilted upordown, oroff
 to
the side, youmay need tocorrect theimage shape forthe best display quality.
 Correcting
ImageShape withtheKeystone Buttons
 Parent
topic:UsingBasicProjector Features
 Correcting
ImageShape withtheKeystone Buttons
 You
canusetheprojectors keystonecorrection buttonstocorrect theshape ofan image thatis
 unevenly
rectangular onthe sides.
 Note:
Toprovide thebest possible imagequality, adjusttheprojectors positiontocorrect theimage
 shape.
Ifthis isnt possible, usethekeystone correction buttonsonthe projector tocorrect theimage
 shape.

1.
Turn onthe projector anddisplay animage.
 Note:
Youcandisplay apattern toaid inadjusting theprojected imageusingtheSettings menu.
 Note:
Youcanalso display thepattern bypressing thePattern buttononthe remote control.
 2.
Press oneofthese keystone buttonsonthe control paneltodisplay theKeystone adjustment
 screen.

47  
						

							

3.
Press akeystone buttononthe projectors controlpaneltoadjust theimage shape.
 After
correction, yourimage isslightly smaller.
 Note:
Ifthe projector isinstalled outofreach, youcanalso correct theimage shape withtheremote
 control
usingtheKeystone settingsinthe projector menus.
 Parent
topic:Image Shape
 Related
references
 Projector
FeatureSettings -Settings Menu
 Resizing
theImage WiththeZoom Ring
 1.
Turn onthe projector anddisplay animage. Wait30minutes afterturning onthe projector before
 setting
thefocus, zoom, andlens shiftformaximum accuracy.
 Note:
Youcandisplay apattern toaid inadjusting theprojected imageusingthePattern buttonon
 the
remote control.
 48  
						

							

2.
Toenlarge orreduce theimage size,rotate theprojectors zoomring.
 Parent
topic:UsingBasicProjector Features
 Focusing
theImage UsingtheFocus Ring
 1.
Turn onthe projector anddisplay animage. Wait30minutes afterturning onthe projector before
 setting
thefocus, zoom, andlens shiftformaximum accuracy.
 Note:
Youcandisplay apattern toaid inadjusting theprojected imageusingthePattern buttonon
 the
remote control.
 2.
Tosharpen theimage focus,rotatetheprojector ’s focus ring.
 49   
						

							

Parent
topic:UsingBasicProjector Features
 Adjusting
theColor Convergence (PanelAlignment)
 You
canusethePanel Alignment featuretomanually adjustthecolor convergence (thealignment ofthe
 red,
green andblue colors) inthe projected image.
 Note:
Allowyourprojector towarm upfor atleast 10to15 minutes andmake suretheimage isin focus
 before
youusethePanel Alignment feature.Theprojected imageshould beaminimum of60 inches
 (152
cm)diagonally andtheprojection surfaceshouldnotbecolored ortextured, otherwise the
 adjustment
gridswillbedifficult toalign.
 1.
Turn onthe projector.
 2.
Press theMenu button.
 3.
Select theExtended menuandpress Enter.
 4.
Select thePanel Alignment settingandpress Enter.
 5.
Select thePanel Alignment settingandpress Enter.
 6.
Select Onand press Enter.
 7.
Select theSelect Colorsetting andchoose oneofthe following:
 •
Rto adjust thered color convergence.
 50