Epson Projector PowerLite 4650 User Manual

Parent
topic:Wireless NetworkProjection
 Setting
UpWireless NetworkSecurity
 You
cansetupsecurity foryour projector touse onthe wireless network. Setupone ofthe following
 security
optionstomatch thesettings usedonyour network:
 •
WEP encryption
 •
WPA security
 Note:
Check withyour network administrator forguidance onentering thecorrect information.
 1.
Press theMenu button.
 2.
Select theNetwork menuandpress Enter.
 3.
Select Network Configuration andpress Enter.
 4.
Select theSecurity menuandpress...

Parent
topic:Wireless NetworkProjection
 Wireless
SecurityMenuSettings
 Settings
onthe Security menuletyou select thetype ofsecurity andsecurity settingsthatmatch the
 network
youareconnecting theprojector to.
 Setting
 Options
 Description

Security
 WEP
andWPA types available
 Selects
thetype ofsecurity used
 on
the wireless network
 WEP
Encryption
 128Bit
 For
WEP security, selectsthe
 type
ofencryption coding
 64Bit

Format
 ASCII
 For
WEP security, selectsthe
 encryption
inputmethod:
 HEX

ASCII...

Parent
topic:Setting UpWireless NetworkSecurity
 Setting
UpProjector NetworkE-MailAlerts
 You
cansetupthe projector tosend youane-mail alertover thenetwork ifthere isaproblem withthe
 projector.

1.
Press theMenu button.
 2.
Select theNetwork menuandpress Enter.
 3.
Select Network Configuration andpress Enter.
 4.
Select theMail menu andpress Enter.
 5.
Turn onMail Notification .
 6.
Enter theIPaddress forthe SMTP Server option.
 Note:
Toenter theIPaddress usingthenumeric keysonthe remote control,...

8.
Choose anAddress field,enter thee-mail address, andselect thealerts youwant toreceive there.
 Repeat
foruptothree addresses.
 Note:
Youre-mail address canbeupto32 alphanumeric characterslong.
 9.
When youfinish selecting settings,selectComplete andfollow theon-screen instructions tosave
 your
settings andexitthemenus.
 Note:
Ifa critical problem causesaprojector toshut down, youmay notreceive ane-mail alert.
 Network
Projector E-mailAlertMessages
 Parent
topic:UsingtheProjector onaNetwork
 Network...

4.
Select theOthers menuandpress Enter.
 5.
Enter uptotwo IPaddresses toreceive SNMPnotifications, using0to 255 foreach address field.
 Note:
Toenter theIPaddress usingthenumeric keysonthe remote control, pressandhold the
 Num
button. Donot use these addresses: 127.x.x.xor224.0.0.0 through255.255.255.255 (wherex
 is
anumber from0to 255).
 6.
Ifavailable, selectthePriority Gateway settingforyour network.
 7.
Ifyour network environment usesanAMX controller, turnonthe AMX Device Discovery settingto...

11.
When youfinish selecting settings,selectComplete andfollow theon-screen instructions tosave
 your
settings andexitthemenus.
 Parent
topic:UsingtheProjector onaNetwork
 Controlling
aNetworked ProjectorUsingaWeb Browser
 Once
youhave connected yourprojector toyour network, youcanselect projector settingsandcontrol
 projection
usingacompatible webbrowser. Thisletsyou access theprojector remotely.
 Note:
Theweb setup andcontrol features supportMicrosoft InternetExplorer 6.0orlater, andSafari on...

1
 Power
onbutton control
 2
 Input
source selection controls
 3
 Freeze
buttoncontrol
 4
 A/V
Mute button control
 5
 Page
Upand Page Down button controls
 6
 Closed
caption control
 7
 Volume
buttoncontrols
 8
 Source
searchcontrol
 9
 Power
offbutton control
 6.
Select theicon corresponding tothe projector functionyouwant tocontrol.
 Parent
topic:UsingtheProjector onaNetwork
 Related
references
 Projector
SetupSettings -Extended Menu
 67  

Crestron
RoomView Support
 If
you areusing theCrestron RoomView networkmonitoring andcontrol system, youcansetupyour
 projector
foruse onthe system. Crestron RoomView letsyou control andmonitor yourprojector usinga
 web
browser.
 Note:
Youcannot usetheEpson WebControl featureorthe Message Broadcasting plug-inforEasyMP
 Monitor
whenyouuseCrestron RoomView.
 For
additional information onCrestron RoomView, contactCrestron.
 Setting
UpCrestron RoomView Support
 Controlling
aNetworked ProjectorUsingCrestron...

4.
Select theOthers menuandpress Enter.
 5.
SettheCrestron RoomView settingtoOn toallow theprojector tobe detected.
 Note:
Enabling CrestronRoomView disablestheEpson Message Broadcast featureinthe EMP
 monitor
software.
 6.
When youfinish selecting settings,selectComplete andfollow theon-screen instructions tosave
 your
settings andexitthemenus.
 7.
Turn offthe projector, thenturniton again toenable thesetting.
 Parent
topic:Crestron RoomView Support
 Controlling
aNetworked ProjectorUsingCrestron...

3.
Select theinput source thatyouwant tocontrol inthe Sources Listbox. Youcanscroll through
 available
sourcesusingtheupand down arrows inthe box.
 4.
Tocontrol projection remotely,clicktheon-screen buttonsthatcorrespond tothe projectors remote
 control
buttons. Youcanscroll through buttonoptions atthe bottom ofthe screen.
 Note:
These on-screen buttonsdonot directly correspond tothe projectors remotecontrolbuttons:
 •
OK acts asthe Enter button
 •
Menu displays theprojectors menu
 5.
Toview...