Epson Projector PowerLite 4030 User Manual

							

3
 Receiver

4
 Video
cable
 Parent
topic:Projector Connections
 Installing
Batteriesinthe Remote Control
 The
remote controlusesthetwo AAbatteries thatcame withtheprojector.
 Caution:
Useonly thetype ofbatteries specified inthis manual. Donot install batteries ofdifferent types,
 or
mix new andoldbatteries.
 1.
Open thebattery cover.
 31  
						

							

2.
Insert thebatteries withthe+and –ends facing asshown.
 3.
Close thebattery coverandpress itdown untilitclicks intoplace.
 Warning:
Disposeofused batteries according tolocal regulations. Donot expose batteries toheat
 or
flame. Keepbatteries outofthe reach ofchildren; theyarechoking hazards andarevery
 dangerous
ifswallowed.
 Parent
topic:Setting Upthe Projector
 Related
references
 Remote
ControlSpecifications
 32   
						

							

Using
BasicProjector Features
 Follow
theinstructions inthese sections touse your projectors basicfeatures.
 Turning
Onthe Projector
 Turning
Offthe Projector
 Viewing
3DImages
 Selecting
theLanguage forthe Projector Menus
 Adjusting
theImage Height
 Image
Shape
 Resizing
theImage WiththeZoom Ring
 Focusing
theImage UsingtheFocus Ring
 Adjusting
theColor Convergence (PanelAlignment)
 Remote
ControlOperation
 Selecting
anImage Source
 Projection
Modes
 Image
Aspect Ratio
 Color
Mode
 Using
Picture inPicture
 Turning
Onthe Projector
 Turn
onthe computer orvideo equipment youwant touse before youturn onthe projector soitcan
 display
theimage source.
 33 
						

							

1.
Connect thepower cordtothe projectors powerinlet.
 2.
Plug thepower cordintoanelectrical outlet.
 The
projectors powerlightturns blue.Thisindicates thattheprojector isreceiving power.
 Note:
WithDirect Power Onturned on,theprojector turnsonassoon asyou plug itin.
 3.
Press thepower button onthe projector orthe Onbutton onthe remote controltoturn onthe
 projector.

The
shutter opensandtheStatus lightflashes blueasthe projector warmsup.Once theprojector is
 warmed
up,theStatus lightstops flashing andturns blue.
 Warning:
Neverlookintotheprojector lenswhen thelamp ison. This candamage youreyes andis
 especially
dangerous forchildren.
 If
you donot see aprojected imagerightaway, trythe following:
 •
Turn onthe connected computerorvideo device.
 •
Insert aDVD orother video media andpress theplay button, ifnecessary.
 •
Press theSource buttononthe projector todetect thevideo source, orpress asource buttononthe
 remote
control.
 Parent
topic:UsingBasicProjector Features
 Related
references
 Projector
SetupSettings -Extended Menu
 34  
						

							

Turning
Offthe Projector
 Before
turning offthe projector, shutdown anycomputer connected toitso you canseethecomputer
 display
duringshutdown.
 Note:
Turnoffthis product whennotinuse toprolong thelifeofthe projector. Lamplifewill vary
 depending
uponmode selected, environmental conditions,andusage. Brightness decreasesovertime.
 Note:
When usingtheBlank feature, theprojector lampisstill on.Toturn offthe lamp, turnoffthe
 projector.

1.
Press thepower button onthe projector orthe Standby buttononthe remote control.
 The
projector displaysashutdown confirmation screen.
 2.
Press thepower button onthe projector orthe Standby buttononthe remote controlagain.(To
 leave
iton, press anyother button.)
 The
shutter closes, thelamp turns off,and theStatus lightturns off.
 3.
Totransport orstore theprojector, makesuretheStatus lightisoff, then unplug thepower cord.
 35  
						

							

Caution:
Toavoid damaging theprojector orlamp, never unplug thepower cordwhen theStatus
 light
ison orflashing.
 Parent
topic:UsingBasicProjector Features
 Related
tasks
 Shutting
Offthe Picture Temporarily
 Transporting
theProjector
 Viewing
3DImages
 You
canview 3Dimages usingyourprojector. Viewing3Dimages requires a3D-compatible video
 device
andapair ofEpson RF3Dglasses.
 You
canpurchase EpsonRF3Dglasses fromanEpson authorized reseller.Tofind thenearest reseller,
 call
800-GO-EPSON (800-463-7766).Oryou canpurchase onlineatepsonstore.com (U.S.sales) or
 epson.ca
(Canadian sales).
 1.
Connect a3D-compatible videodevice tothe projector usingacompatible HDMIcable.
 2.
Turn onthe video device, thenturnonthe projector.
 3.
Begin playback fromthevideo device.
 Note:
Makesureyousetthe video device toplay content in3D mode.
 4.
Press the2D/3D buttononthe remote controltoactivate 3Dmode, ifnecessary.
 36  
						

							

5.
Slide thepower switch onthe 3Dglasses tothe Onposition.
 6.
Putonthe 3Dglasses. Ifyou donot see a3D image, pairtheglasses withtheprojector.
 Note:
Ifyou change thevideo source oryou arenotwithin range ofyour projector, theglasses enter
 standby
modeandtheindicator lightflashes green.Slidethepower switch onthe glasses tothe Off
 position
andthen back tothe Onposition toresume 3Dviewing.
 Pairing
the3DGlasses withtheProjector
 Charging
the3DGlasses
 3D
Viewing Range
 Parent
topic:UsingBasicProjector Features
 Related
tasks
 Connecting
toan HDMI Video Source
 Connecting
toaComputer forHDMI Video
 Pairing
the3DGlasses withtheProjector
 Pair
theglasses withtheprojector toestablish communication betweenthemfor3D viewing.
 1.
Turn onthe projector.
 2.
Settheimage source toHDMI.
 3.
Project a3D image.
 37  
						

							

4.
Slide thepower switch onthe 3Dglasses tothe Onposition.
 5.
Move theglasses within10feet (3m) ofthe projector, thenholddown thePairing buttononthe
 glasses
foratleast three seconds.
 The
status lightonthe glasses flashesgreenandred. Ifpairing issuccessful, thelight turns green
 for
10seconds andthen turns off.
 Parent
topic:Viewing 3DImages
 Charging
the3DGlasses
 Charge
theglasses whenthestatus lightonthe glasses flashesredtoindicate alow battery.
 38   
						

							

1.
Connect thesmaller endofthe charging cabletothe port onthe bridge ofthe glasses.
 Note:
Makesureyouconnect thecable inthe correct orientation oryou may damage theglasses or
 cable.

2.
Doone ofthe following:
 •
Plug theother endofthe charging cableintoapowered USBportonacomputer orother device.
 •
Plug theother endofthe charging cableintoaUSB-to-AC adapterwiththefollowing
 specifications:

Input:
100-240V, ~0.15A,50-60Hz
 Output:
5V=1A
 The
glasses arefully charged whenthestatus lightonthe glasses staysgreen.
 Parent
topic:Viewing 3DImages
 3D
Viewing Range
 When
youview 3Dimages, makesureyouarepositioned withintheviewing rangeshown here.
 39  
						

							

1
 32
ft(10 m)
 Parent
topic:Viewing 3DImages
 Selecting
theLanguage forthe Projector Menus
 If
you want toview theprojectors menusandmessages inanother language, youcanchange the
 Language
setting.
 1.
Turn onthe projector.
 2.
Press theMenu button.
 40