Epson Projector PowerLite 4030 User Manual

6.
Liftupthe lamp handle andgently pullthelamp outofthe projector.
 Note:
Thelamp(s) inthis product containmercury. Pleaseconsult yourstate andlocal
 regulations
regardingdisposalorrecycling. Donot putinthe trash.
 7.
Gently insertthenew lamp intotheprojector. Ifitdoes notfiteasily, makesureitis facing theright
 way.
Press thehandle downuntilitlocks intoplace.
 Caution:
Donot touch anyglass onthe lamp assembly toavoid premature lampfailure.
 91    

8.
Push inthe lamp firmly andtighten thescrews tosecure it.
 9.
Replace thelamp cover andtighten thescrew tosecure it.
 Note:
Besure thelamp cover issecurely installedorthe lamp willnot come on.
 Reset
thelamp timer tozero tokeep trackofthe new lamp ’s usage.
 Parent
topic:Projector LampMaintenance
 Related
tasks
 Resetting
theLamp Timer
 92   

Resetting
theLamp Timer
 You
must reset thelamp timer afterreplacing theprojectors lamptoclear thelamp replacement
 message
andtokeep trackoflamp usage correctly.
 Note:
Donot reset thelamp timer ifyou have notreplaced thelamp toavoid inaccurate lampusage
 information.

1.
Turn onthe projector.
 2.
Press theMenu button.
 3.
Select theReset menuandpress Enter.
 4.
Select ResetLampHours andpress Enter.
 You
seeaprompt askingifyou want toreset thelamp hours.
 5.
Select Yesandpress Enter.
 6.
Press Menu...

Caution:
Useonly thetype ofbatteries specified inthis manual. Donot install batteries ofdifferent types,
 or
mix new andoldbatteries.
 1.
Open thebattery coverasshown.
 2.
Remove theoldbatteries.
 Warning:
Ifthe battery fluidhasleaked, wipeitaway withasoft cloth andavoid getting thefluid on
 your
hands. Ifitgets onyour hands, washthemimmediately toavoid injury.
 3.
Insert thebatteries withthe+and –ends facing asshown.
 94   

4.
Close thebattery coverandpress itdown untilitclicks intoplace.
 Warning:
Disposeofused batteries according tolocal regulations. Donot expose batteries toheat
 or
flame. Keepbatteries outofthe reach ofchildren; theyarechoking hazards andarevery
 dangerous
ifswallowed.
 Parent
topic:Projector Maintenance
 Related
references
 Remote
ControlSpecifications
 Transporting
theProjector
 The
projector containsprecision parts,someofwhich areglass. Follow theseguidelines totransport or
 ship
theprojector...

Solving
Problems
 Check
thesolutions inthese sections ifyou have anyproblems usingtheprojector.
 Projection
ProblemTips
 Projector
LightStatus
 Solving
ImageProblems
 Solving
Projector orRemote ControlOperation Problems
 Where
toGet Help
 Projection
ProblemTips
 If
the projector isnot working properly, tryturning itoff and unplugging it.Then plugitback inand turn it
 on.

If
this does notsolve theproblem, checkthefollowing:
 •
The lights onthe projector mayindicate whattheproblem is.
 •
The solutions...

1
 Status
light
 2
 Lamp
light
 3
 Temp
light
 4
 Power
light
 Power
light
 Status
light
 Lamp
light
 Temp
light
 Status
andsolution
 Blue
 Blue
 Off
 Off
 Normal
operation
 Blue
 Flashing
blue
 Off
 Off
 Warming
up;wait foranimage to
 appear

Off
 Off
 Off
 Off
 Standby
orsleep mode
 97  

Power
light
 Status
light
 Lamp
light
 Temp
light
 Status
andsolution
 Blue
 Flashing
blue
 Off
 Off
 Shutting
down;whentheStatus light
 stops
flashing, youcanunplug the
 projector

Flashing
blue
 Varies
 Off
 Flashing
 Projector
istoo hot
 orange

•
Make surethatthevents andair
 filter
arenotclogged withdust or
 obstructed
bynearby objects
 •
Clean orreplace theairfilter
 •
Make suretheenvironmental
 temperature
isnot toohot
 Off
 Flashing
blue
 Off
 Orange
 Projector
hasoverheated andturned
 off;...

Power
light
 Status
light
 Lamp
light
 Temp
light
 Status
andsolution
 Off
 Flashing
blue
 Orange
 Off
 Lamp
hasaproblem
 •
Check tosee ifthe lamp isburned
 out,
broken, orinstalled incorrectly;
 reseat
orreplace thelamp as
 necessary

•
Clean orreplace theairfilter
 •
Ifoperating theprojector athigh
 altitude,
turnonHigh Altitude
 Mode

•
Ifthe problem persists, unplugthe
 projector
andcontact Epsonfor
 help

Flashing
blue
 Varies
 Flashing
 Off
 Replace
thelamp soon toavoid
 orange
 damage;
donot...

Related
tasks
 Cleaning
theAirFilter
 Replacing
theLamp
 Replacing
theAirFilter
 Solving
ImageProblems
 Check
thesolutions inthese sections ifyou have anyproblems withprojected images.
 Solutions
WhenNoImage Appears
 Solutions
WhenNo Signal Message Appears
 Solutions
WhenNot Supported Message Appears
 Solutions
WhenOnlyaPartial ImageAppears
 Solutions
WhentheImage isNot Rectangular
 Solutions
WhentheImage Contains NoiseorStatic
 Solutions
WhentheImage isFuzzy orBlurry
 Solutions
WhentheImage Brightness...