Epson Projector PowerLite 3900 User Manual

51
Using
BasicProjector Features
 Follow
theinstructions inthese sections touse your projectors basicfeatures.
 Turning
Onthe Projector
 Turning
Offthe Projector
 Viewing
3DImages
 Selecting
theLanguage forthe Projector Menus
 Adjusting
theImage Height
 Adjusting
theImage Position UsingLensShift
 Image
Shape
 Resizing
theImage withtheZoom Ring
 Focusing
theImage UsingtheFocus Ring
 Remote
ControlOperation
 Selecting
anImage Source
 Projection
Modes
 Image
Aspect Ratio
 Color
Mode
 Turning
Onthe...

52
2.
Connect thepower cordtothe projectors powerinlet.
 3.
Plug thepower cordintoanelectrical outlet.
 Note:
WithDirect Power Onturned on,theprojector turnsonassoon asyou plug itin.
 4.
Press thepower button onthe projector orthe Onbutton onthe remote controltoturn onthe
 projector.

The
status lightflashes blueasthe projector warmsup.Once theprojector iswarmed up,thestatus
 light
stops flashing andturns blue.
 Warning:
Neverlookintotheprojector lenswhen thelamp ison. This candamage youreyes andis...

53
Using
theHome Screen
 You
canselect inputsources andother frequently usedoptions fromtheHome screen.
 1.
Todisplay theHome screen, doone ofthe following:
 •
Press theHome button onthe remote control.
 •
Turn onthe projector withtheHome Screen AutoDispsetting enabled.
 •
Turn onthe projector whennosignal isreceived fromtheselected inputsource.
 2.
Press thearrow buttons onthe remote controlorcontrol paneltonavigate thescreen, andpress
 Enter
toselect anoption.
 1
 Select
thevideo source youwant...

54
3.
Press theHome button tohide theHome screen.
 Parent
topic:Turning Onthe Projector
 Related
references
 Projector
SetupSettings -Extended Menu
 Turning
Offthe Projector
 Before
turning offthe projector, shutdown anycomputer connected toitso you canseethecomputer
 display
duringshutdown.
 Note:
Turnoffthis product whennotinuse toprolong thelifeofthe projector. Lamplifewill vary
 depending
uponmode selected, environmental conditions,andusage. Brightness decreasesovertime.
 Note:
When usingtheA/V...

55
3.
Totransport orstore theprojector, makesurethestatus lightisoff, then unplug thepower cord.
 Caution:
Toavoid damaging theprojector orlamp, never unplug thepower cordwhen thestatus
 light
ison orflashing.
 4.
Replace theprojectors lenscover.
 Parent
topic:UsingBasicProjector Features
 Related
tasks
 Shutting
Offthe Picture andSound Temporarily
 Transporting
theProjector   

56
Viewing
3DImages
 You
canview 3Dimages usingyourprojector. Viewing3Dimages requires a3D-compatible video
 device,
acompatible HDMIcable, andapair ofEpson RF3Dglasses (notincluded withyour projector).
 You
canalso convert 2Dimages to3D using the2D-to-3D Conversion settinginyour projectors
 Signal
>3D Setup menu.
 You
canpurchase EpsonRF3Dglasses fromanEpson authorized reseller.Tofind thenearest reseller,
 call
800-GO-EPSON (800-463-7766).Oryou canpurchase onlineatepsonstore.com (U.S.sales) or...

57
6.
Putonthe 3Dglasses. Ifyou donot see a3D image, pairtheglasses withtheprojector.
 Note:
Ifyou change thevideo source oryou arenotwithin range ofyour projector, theglasses enter
 standby
modeandthestatus lightflashes green.Slidethepower switch onthe glasses tothe Off
 position
andthen back tothe Onposition toresume 3Dviewing.
 Pairing
the3DGlasses withtheProjector
 Charging
the3DGlasses
 3D
Viewing Range
 Parent
topic:UsingBasicProjector Features
 Related
references
 Input
Signal Settings -Signal...

58
5.
Move theglasses within10feet (3m) ofthe projector andhold down thePairing buttonforatleast
 three
seconds.
 The
status lightonthe glasses flashesgreenandred. Ifpairing issuccessful, thelight turns green
 for
10seconds andthen turns off.
 Parent
topic:Viewing 3DImages
 Charging
the3DGlasses
 When
thestatus lightonthe glasses flashesredtoindicate alow battery, itis time tocharge theglasses.
 1.
Connect thesmaller endofthe charging cabletothe port onthe bridge ofthe glasses.
 Note:...

59
•
Plug theother endofthe charging cableintoaUSB-to-AC adapterwiththefollowing
 specifications:

Input:
100-240V, ~0.15A,50-60Hz
 Output:
5V=1A
 The
glasses arefully charged whenthestatus lightonthe glasses staysgreen.
 Parent
topic:Viewing 3DImages
 3D
Viewing Range
 When
youview 3Dimages, makesureyouarepositioned withintheviewing rangeshown here.
 1
 32
ft(10 m)
 Parent
topic:Viewing 3DImages
 Selecting
theLanguage forthe Projector Menus
 If
you want toview theprojectors menusandmessages inanother...

60
1.
Turn onthe projector.
 2.
Press theMenu button.
 3.
Select theExtended menuandpress Enter.
 4.
Select theLanguage settingandpress Enter.
 5.
Select thelanguage youwant touse and press Enter.
 6.
Press Menu orEsc toexit themenus.
 Parent
topic:UsingBasicProjector Features
 Adjusting
theImage Height
 If
you areprojecting fromatable orother flatsurface, andtheimage istoo high orlow, youcanadjust
 the
image heightusingtheprojectors adjustablefeet.
 1.
Turn onthe projector anddisplay animage.