Epson Projector PowerLite 2040 User Manual

2.
Connect theother endtoone ofthe projectors HDMIports.
 Note:
Theprojector convertsthedigital audiosignal sentfrom yourcomputer intoamono analog signal
 for
the internal speaker orastereo analog signalifyou areconnecting toexternal speakers.
 Parent
topic:Connecting toComputer Sources
 Related
tasks
 Connecting
toExternal Speakers
 Connecting
toaComputer forSound
 If
your computer presentation includessoundandyoudidnot connect itusing theprojectors HDMIport,
 you
canstillplay sound through...

You
canalso connect theprojector toan amplifier withspeakers.
 Note:
Theprojectors built-inspeaker systemisdisabled whenyouconnect external speakers.
 1.
Make sureyourcomputer orvideo source isconnected tothe projector withboth audio andvideo
 cables
asnecessary.
 2.
Locate theappropriate cabletoconnect yourexternal speakers, suchasastereo mini-jack-to-pin-
 jack
cable, oranother typeofcable oradapter.
 3.
Connect oneendofthe cable toyour external speakers asnecessary.
 4.
Connect thestereo mini-jack...

•
Multimedia storageviewer
 •
USB memory cardreader
 Note:
Digital cameras orsmartphones mustbeUSB-mounted devices,notTWAIN-compliant devices,
 and
must beUSB Mass Storage Class-compliant.
 Note:
USBharddrives mustmeet these requirements:
 •
USB Mass Storage Class-compliant (notallUSB Mass Storage Classdevices aresupported)
 •
Formatted inFAT orFAT32
 •
Self-powered bytheir ownACpower supplies (bus-powered harddrives arenotrecommended)
 •
Does nothave multiple partitions
 You
canproject slideshows...

3.
Connect theother endofthe cable (ifapplicable) toyour device.
 Parent
topic:Connecting toExternal USBDevices
 Related
topics
 Projecting
aSlide Show
 Selecting
theConnected USBSource
 You
canswitch theprojectors displaytothe source youconnected tothe USB Type Aport.
 1.
Make suretheconnected USBsource isturned on,ifnecessary.
 2.
Press theSlideshow buttononthe remote control.
 3.
Press thebutton againtocycle through otherUSBsources, ifavailable.
 Parent
topic:Connecting toExternal USBDevices...

1.
Remove thebattery cover.
 2.
Insert thebatteries withthe+and –ends facing asshown.
 35   

3.
Replace thebattery coverandpress itdown untilitclicks intoplace.
 Warning:
Disposeofused batteries according tolocal regulations. Donot expose batteries toheat
 or
flame. Keepbatteries outofthe reach ofchildren; theyarechoking hazards andarevery
 dangerous
ifswallowed.
 Parent
topic:Setting Upthe Projector
 Opening
theLens Cover
 To
open theprojectors lenscover, slidetheA/V Mute slidelever untilitclicks intotheopen position.
 36  

Parent
topic:Setting Upthe Projector
 37  

Wireless
NetworkProjection
 You
cansend images toyour projector throughawireless network(PowerLite HomeCinema 2045).You
 can
connect theprojector toyour wireless networkbyconfiguring theconnection manuallyusingthe
 projectors
Networkmenus.
 After
setting upthe projector, installthenetwork software. Youcandownload thelatest software and
 documentation
fromtheEpson website.
 Use
thefollowing softwareanddocumentation toset up, control, andmonitor wireless projection:
 •
EasyMP NetworkProjection...

3.
Select theNetwork menuandpress Enter.
 4.
Make suretheWireless LANPower optionisset toOn .
 5.
Select Network Configuration andpress Enter.
 6.
Select theBasic menuandpress Enter.
 39 

7.
Select thefollowing basicoptions asnecessary:
 •
Projector Nameletsyou enter aname upto16 alphanumeric characterslongtoidentify the
 projector
overthenetwork.
 •
Remote Password letsyou enter apassword upto8alphanumeric characterslongforaccessing
 the
projector overtheweb. (Default username isEPSONWEB ;default password isadmin .)
 •
Display LANInfoletsyou select howtheprojector displaysnetworkinformation. Youcanselect
 an
option todisplay aQR code thatletsyou quickly connect youriOSorAndroid...