Epson Projector PowerLite 1980WU User Manual

Setting
 Options
 Description

IP
Settings
 DHCP
 Select
DHCP ifyour network
 assigns
addresses automatically,
 IP
Address
 or
manually enterthenetworks
 Subnet
Mask
 IP
Address ,Subnet Mask,and
 Gateway
Address
 Gateway
Address
 SSID
Display
 On
 Selects
whether todisplay the
 SSID
onthe network standby
 Off

screen

IP
Address Display
 On
 Selects
whether todisplay theIP
 address
onthe network standby
 Off

screen

Parent
topic:Selecting WirelessNetworkSettingsManually
 Searching
foraWireless...

4.
Select Network Configuration andpress Enter.
 5.
Select theWireless LANmenu andpress Enter.
 6.
Select Advanced asthe Connection Modesetting andpress Enter.
 7.
Select Search Access Pointandpress Enter.
 8.
Select thename ofthe wireless networkyouwant toconnect toand press Enter.
 9.
Ifthe network hassecurity enabled, enterthewireless password.
 52 

You
seeascreen likethis:
 10.
Select thesettings onthe security menuasnecessary foryour network.
 11.
When youfinish selecting settings,selectComplete andfollow theon-screen instructions tosave
 your
settings andexitthemenus.
 Parent
topic:Wireless NetworkProjection
 Selecting
WirelessNetworkSettingsinWindows
 Before
connecting tothe projector, selectthecorrect wireless networkonyour computer.
 1.
Toaccess yourwireless utilitysoftware, double-click thenetwork icononthe Windows taskbar.
 2.
Doone ofthe...

2.
Make sureAirPort isturned on,then doone ofthe following:
 •
Ifyour projector isset uponanexisting network (Advanced mode),selectthenetwork name
 (SSID).

•
Ifyour projector isconfigured forQuick mode, selecttheprojectors SSID.
 Parent
topic:Wireless NetworkProjection
 Setting
UpWireless NetworkSecurity
 You
cansetupsecurity foryour projector touse onthe wireless network. Setupone ofthe following
 security
optionstomatch thesettings usedonyour network:
 •
WPA/WPA2-PSK security(Advanced connection...

5.
Select thesecurity settingsforyour network.
 Note:
WPAauthentication viaanauthentication serverisnot supported.
 6.
When youfinish selecting settings,selectComplete andfollow theon-screen instructions tosave
 your
settings andexitthemenus.
 Wireless
SecurityMenuSettings
 Parent
topic:Wireless NetworkProjection
 Wireless
SecurityMenuSettings
 Settings
onthe Security menuletyou select thetype ofsecurity andsecurity settingsthatmatch the
 network
youareconnecting theprojector to.
 Setting
 Options...

Screen
Mirroring Restrictions
 Note
thefollowing whenusingScreen Mirroring features:
 •
You cannot playaudio withmore than3channels.
 •
You cannot projectimages witharesolution above1920×1080 andaframe rateabove 50fps.
 •
You cannot play3Dvideo.
 •
Extended MiracastfeaturesonWindows 8.1are notsupported.
 •
The extended IntelWiDi version 4features arenotsupported.
 •
You may notbeable toview contents withcopyright protection withaMiracast connection.
 Parent
topic:Wireless NetworkProjection fromaMobile...

•
Wireless LANSys. letsyou select thetype ofwireless LANsystem theprojector isconnected to.
 •
Adjust ImageQuality letsyou adjust thescreen mirroring speed/quality. Selectasmall number
 to
improve thequality andselect alarge number toincrease thespeed.
 •
Connection Modeletsyou select thetype ofWPS (Wi-Fi Protected Setup)youareusing.
 •
PIN Code Notice letsyou select whether thePIN code isdisplayed onthe projected imagewhile
 projecting
fromsources otherthantheScreen Mirroring source.
 6.
When...

8.
Select yourprojector fromthelist.
 9.
Ifyou seethePIN entry screen onyour computer ormobile device, enterthePIN code displayed on
 the
Screen Mirroring standbyscreenoratthe bottom rightofthe projected imageandclick Next.
 The
projector displaystheimage fromyourcomputer ormobile device.
 Note:
Itmay some timetoestablish theconnection. Donot disconnect theprojectors powercord
 while
itis connecting toyour device. Thismay cause yourdevice tofreeze ormalfunction.
 Parent
topic:Wireless NetworkProjection...

Note:
Itmay some timetoestablish theWiDi connection. Donot disconnect theprojectors power
 cord
while itis connecting toyour device. Thismay cause yourdevice tofreeze ormalfunction.
 Parent
topic:Wireless NetworkProjection fromaMobile Device (Screen Mirroring)
 Connecting
forScreen Mirroring withMiracast
 If
your mobile devicesupports Miracast, youcanconnect itto the projector wirelessly andproject images
 and
sound.
 1.
Select theScreen Mirroring Settingsonyour projector asnecessary.
 2.
Press theLAN...

3.
Select Network Configuration andpress Enter.
 4.
Select theMail menu andpress Enter.
 5.
Turn onMail Notification .
 6.
Enter theIPaddress forthe SMTP Server option.
 Note:
Donot use these addresses: 127.x.x.xor224.0.0.0 through255.255.255.255 (wherexis a
 number
from0to 255).
 7.
Select anumber forthe SMTP server PortNumber ,from 1to 65535 (default is25).
 8.
Choose anAddress field,enter thee-mail address, andselect thealerts youwant toreceive there.
 Repeat
foruptothree addresses.
 Note:...