Epson Projector PowerLite 1950 User Manual

Parent
topic:UsingBasicProjector Features
 Automatically
CorrectingImageShape WithScreen Fit
 You
canusetheprojectors ScreenFitfeature toautomatically correcttheshape andposition ofimages
 to
fiton your screen (PowerLite 1945W/1955/1965).
 The
projectors sensorcandetect thescreen sizeandshape inthese conditions:
 •
Projector isnot mounted onthe ceiling
 •
Screen sizeis100 inches (254cm)orless
 •
Projection distanceisabout 3feet (1m) to11.5 feet(3.5 m)
 •
Projection angleisabout 20ºright orleft, or30ºup...

5.
Fine-tune theimage shape asnecessary usingthearrow buttons onthe control panel.
 6.
When youarefinished, pressEsc.
 Now,
ifnecessary, youcancorrect theimage corners individually usingQuick Corner bypressing the
 arrow
buttons onthe control panel.
 Parent
topic:Image Shape
 Related
tasks
 Correcting
ImageShape withQuick Corner
 Correcting
ImageShape withtheHorizontal KeystoneSlider
 You
canusetheprojectors horizontalkeystoneslider(PowerLite 1940W/1950/1960) tocorrect the
 shape
ofan image...

Related
references
 Projector
FeatureSettings -Settings Menu
 Correcting
ImageShape withtheKeystone Buttons
 You
canusetheprojectors keystonecorrection buttonstocorrect theshape ofan image thatis
 unevenly
rectangular onthe sides.
 1.
Turn onthe projector anddisplay animage.
 Note:
Youcandisplay apattern toaid inadjusting theprojected imageusingtheSettings menu.
 2.
Press oneofthese keystone buttonsonthe control paneltodisplay theKeystone adjustment
 screen.

3.
Press akeystone buttononthe projectors...

After
correction, yourimage isslightly smaller.
 Note:
Ifthe projector isinstalled outofreach, youcanalso correct theimage shape usingthe
 Keystone
settingsinthe projector menus.
 Parent
topic:Image Shape
 Related
references
 Projector
FeatureSettings -Settings Menu
 Correcting
ImageShape withQuick Corner
 You
canusetheprojectors QuickCorner settingtocorrect theshape andsize ofan image thatis
 unevenly
rectangular onallsides.
 1.
Turn onthe projector anddisplay animage.
 Note:
Youcandisplay apattern...

3.
Select theSettings menuandpress Enter.
 4.
Select theKeystone settingandpress Enter.
 5.
Select theQuick Corner settingandpress Enter.Then press Enter again.
 You
seetheQuick Corner adjustment screen.
 6.
Use thearrow buttons onthe projector orthe remote controltoselect thecorner ofthe image you
 want
toadjust. Thenpress Enter.
 85 

7.
Press thearrow buttons toadjust theimage shape asnecessary.
 8.
When youarefinished, pressEsc.
 Parent
topic:Image Shape
 Related
references
 Projector
FeatureSettings -Settings Menu
 Resizing
theImage WiththeZoom Ring
 1.
Turn onthe projector anddisplay animage.
 2.
Toenlarge orreduce theimage size,rotate theprojectors zoomring.
 Parent
topic:UsingBasicProjector Features
 Focusing
theImage UsingtheFocus Ring
 1.
Turn onthe projector anddisplay animage.
 Note:
Youcandisplay apattern toaid...

Parent
topic:UsingBasicProjector Features
 Remote
ControlOperation
 The
remote controlletsyou control theprojector fromalmost anywhere inthe room, upto26 feet (8m)
 away.
Youcanpoint itat the screen, orthe front orback ofthe projector.
 Make
surethatyouaimtheremote controlatthe projectors receiverswithintheangles listedhere.
 1
 26
feet (8m)
 2
 45
º
 3
 30
º
 4
 15
º
 Note:
Avoidusingtheremote controlinconditions withbright fluorescent lightsorindirect sunlight, or
 the
projector maynotrespond...

Using
theRemote ControlasaPresentation Pointer
 Parent
topic:UsingBasicProjector Features
 Related
tasks
 Replacing
theRemote ControlBatteries
 Using
theRemote ControlasaWireless Mouse
 You
canusetheprojectors remotecontrolasawireless mousesoyou cancontrol yourcomputer
 presentation
fromadistance.
 1.
Connect theprojector toacomputer usingtheprojectors USB-B,Computer ,DisplayPort ,or HDMI
 port
todisplay video.
 2.
Ifyou connected yourcomputer tothe Computer ,DisplayPort ,or HDMI port,alsoconnect aUSB...

Parent
topic:Remote ControlOperation
 Related
references
 Projector
SetupSettings -Extended Menu
 Using
theRemote ControlasaPresentation Pointer
 You
canusetheprojectors remotecontrolasapointer tohelp youcalloutimportant information during
 a
presentation. Thedefault pointer shapeisan arrow, butyou canselect analternative shapeusingthe
 Settings
menu.
 1.
Press thePointer buttononthe remote control.
 2.
Use thearrow buttons onthe remote controltomove thepointer onthe screen.
 3.
Press Esctoclear...

Selecting
anImage Source
 If
you connected multipleimagesources tothe projector, suchasacomputer andDVD player, youmay
 want
toswitch fromoneimage source tothe other.
 1.
Make suretheconnected imagesource youwant touse isturned on.
 2.
Forvideo image sources, insertaDVD orother video media andpress itsplay button (ifnecessary).
 3.
Doone ofthe following:
 •
Press theSource Searchbuttononthe projector orremote controluntilyouseetheimage from
 the
source youwant.
 •
Press thebutton forthe source youwant...