Epson Projector Powerlite 1770w User Manual

4.
Slide thelamp cover outand liftitoff.
 5.
Liftupthe metal barsecuring thelamp.
 131   

6.
Liftupthe lamp handle andgently pullthelamp outofthe projector.
 Caution:
Liftthe lamp handle carefully toavoid damaging thehandle asyou pulloutthelamp.
 Note:
Thelamp(s) inthis product containmercury. Pleaseconsult yourstate andlocal
 regulations
regardingdisposalorrecycling. Donot putinthe trash.
 132   

7.
Gently insertthenew lamp intotheprojector. Ifitdoes notfiteasily, makesureitis facing theright
 way.
Press downonthe area shown tosecure thelamp inplace.
 Caution:
Donot touch anyglass onthe lamp assembly toavoid premature lampfailure.
 8.
Press themetal bardown overthelamp untilitclicks intoplace onboth sides.
 133   

9.
Replace thelamp cover andtighten thescrew tosecure it.
 Note:
Besure thelamp cover issecurely installedorthe lamp willnot come on.
 Reset
thelamp timer tozero tokeep trackofthe new lamp ’s usage.
 Parent
topic:Projector LampMaintenance
 Related
tasks
 Resetting
theLamp Timer
 Resetting
theLamp Timer
 You
must reset thelamp timer afterreplacing theprojectors lamptoclear thelamp replacement
 message
andtokeep trackoflamp usage correctly.
 Note:
Donot reset thelamp timer ifyou have notreplaced thelamp...

3.
Select theReset menuandpress Enter.
 4.
Select ResetLampHours andpress Enter.
 You
seeaprompt askingifyou want toreset thelamp hours.
 5.
Select Yesandpress Enter.
 Parent
topic:Projector LampMaintenance
 Related
tasks
 Replacing
theLamp
 Replacing
theRemote ControlBatteries
 The
remote controlusesthetwo AAmanganese oralkaline batteries. Replacethebatteries assoon as
 they
runout.
 Caution:
Useonly thetype ofbatteries specified inthis manual. Donot install batteries ofdifferent types,
 or
mix new...

1.
Open thebattery coverasshown.
 2.
Remove theoldbatteries.
 Warning:
Ifthe battery fluidhasleaked, wipeitaway withasoft cloth andavoid getting thefluid on
 your
hands. Ifitgets onyour hands, washthemimmediately toavoid injury.
 3.
Insert thebatteries withthe+and –ends facing asshown.
 136   

4.
Close thebattery coverandpress itdown untilitclicks intoplace.
 Warning:
Disposeofused batteries according tolocal regulations. Donot expose batteries toheat
 or
flame. Keepbatteries outofthe reach ofchildren; theyarechoking hazards andarevery
 dangerous
ifswallowed.
 Parent
topic:Projector Maintenance
 Related
references
 Remote
ControlOperation
 Transporting
theProjector
 The
projector containsprecision parts,someofwhich areglass. Follow theseguidelines totransport or
 ship
theprojector safely:...

Note:
Epson shallnotbeliable forany damages incurredduringtransportation.
 Parent
topic:Maintaining andTransporting theProjector
 138 

Solving
Problems
 Check
thesolutions inthese sections ifyou have anyproblems usingtheprojector.
 Projection
ProblemTips
 Projector
LightStatus
 Using
theProjector HelpDisplays
 Solving
ImageorSound Problems
 Solving
Projector orRemote ControlOperation Problems
 Solutions
WhenNetwork AlertE-Mails areNot Received
 Where
toGet Help
 Projection
ProblemTips
 If
the projector isnot working properly, tryturning itoff and unplugging it.Then plugitback inand turn it
 on.

If
this does notsolve theproblem,...

1
 Power
light
 2
 Lamp
light
 3
 Temperature
light
 Power
light
 Lamp
light
 Temperature
 Status
andsolution
 light

Green
 Off
 Off
 Normal
operation.
 Flashing
green
 Off
 Off
 Warming
up.Wait foranimage toappear.
 Orange
 Off
 Off
 Standby
orsleep mode.
 Flashing
orange
 Off
 Off
 Preparing
networkmonitoring orshutting down.
 (Wait
forthe light toremain orange before
 unplugging
theprojector.)
 Flashing
red
 Off
 Flashing
orange
 Projector
istoo hot.
 •
Make surethatthevents andairfilter arenot...