Epson Projector Powerlite 1750 User Manual

Note:
Thelamp usage timerdoesnotregister anyhours untilyouhave usedthelamp foratleast 10
 hours.
Available settingsdependonthe current inputsource.
 Information
item
 Description

Lamp
Hours
 Displays
thenumber ofhours (H )the lamp hasbeen usedin
 Normal
andECO Power Consumption modes;ifthe information is
 displayed
inyellow, obtainagenuine Epsonreplacement lamp
 soon

Source
 Displays
thename ofthe port towhich thecurrent inputsource is
 connected

Input
Signal
 Displays
theinput signal setting ofthe...

Information
item
 Description

Event
ID
 Displays
theEvent IDnumber corresponding toaspecific projector
 problem;
seethelistofEvent IDcodes
 (PowerLite

1760W/1770W/1775W)

Event
IDCode List
 Parent
topic:Adjusting theMenu Settings
 Related
references
 Optional
Equipment andReplacement Parts
 Projector
LampSpecifications
 Event
IDCode List
 If
the Event IDoption onthe Info menu displays acode number, checkthislistofEvent IDcodes forthe
 solution
tothe projector problemassociated withthecode (PowerLite...

Event
IDcode
 Cause
andsolution
 0891
 Cannot
findanaccess pointwiththesame SSID. Setyour computer, accesspoint,
 and
projector tothe same SSID.
 0892
 The
WPA/WPA2 authentication typedoes notmatch. Makesurethewireless
 network
securitysettingsarecorrect.
 0893
 The
WEP/TKIP/AES encryptiontypedoes notmatch. Makesurethewireless
 network
securitysettingsarecorrect.
 0894
 Communication
withunauthorized accesspointwasdisconnected. Contactyour
 network
administrator.
 0898
 Failed
toacquire...

You
cannot resetthefollowing settingsusingtheReset Alloption:
 •
Input Signal
 •
Users Logo
 •
Language
 •
Network menuitems
 •
Lamp Hours
 •
Password
 •
User Button
 •
Multi-screen
 Parent
topic:Adjusting theMenu Settings
 124 

Maintaining
andTransporting theProjector
 Follow
theinstructions inthese sections tomaintain yourprojector andtransport itfrom place toplace.
 Projector
Maintenance
 Transporting
theProjector
 Projector
Maintenance
 Your
projector needslittlemaintenance tokeep working atits best.
 You
may need toclean thelens periodically, andclean theairfilter andairvents toprevent theprojector
 from
overheating duetoblocked ventilation.
 The
only parts youshould replace arethelamp, airfilter, andremote...

•
To remove stubborn smudges, moistenasoft, lint-free clothwithlens cleaner andgently wipethe
 lens.

Warning:
Donot use alens cleaner thatcontains flammable gas.Thehigh heat generated bythe
 projector
lampmaycause afire.
 Caution:
Donot use glass cleaner toclean thelens, oryou may damage it.Avoid touching thelens
 with
your bare hands toprevent fingerprints onordamage tothe lens surface.
 Parent
topic:Projector Maintenance
 Cleaning
theProjector Case
 Before
cleaning theprojector case,turnoffthe...

2.
Gently remove thedust using asmall vacuum designed forcomputers oravery softbrush (suchas
 a
paintbrush).
 Note:
Youcanremove theairfilter soyou canclean bothsides ofit.Do not rinse theairfilter in
 water,
oruse anydetergent orsolvent toclean it.
 3.
Ifdust isdifficult toremove orthe airfilter isdamaged, replacetheairfilter.
 Parent
topic:AirFilter andVent Maintenance
 Replacing
theAirFilter
 You
need toreplace theairfilter inthe following situations:
 •
After cleaning theairfilter, youseeamessage...

2.
Grasp thetabatthe center ofthe airfilter andpullitout ofthe projector.
 Note:
Airfilters contain polycarbonate, ABSresin, andpolyurethane foam.Dispose ofused airfilters
 according
tolocal regulations.
 128  

3.
Place thenew airfilter inthe projector asshown andpush gently untilitclicks intoplace.
 Parent
topic:AirFilter andVent Maintenance
 Projector
LampMaintenance
 The
projector keepstrackofthe number ofhours thelamp isused anddisplays thisinformation inthe
 projectors
menusystem.
 Replace
thelamp assoon aspossible whenthefollowing occurs:
 •
The projected imagegetsdarker orstarts todeteriorate
 •
Amessage appearswhenyouturn onthe projector tellingyoutoreplace thelamp
 •
The projectors...

Projector
LampSpecifications
 Optional
Equipment andReplacement Parts
 Replacing
theLamp
 Before
youreplace thelamp, letthe projector cooldown foratleast onehour sothe lamp willnot behot.
 Warning:
Letthelamp fullycool before replacing itto avoid injury.
 You
canreplace thelamp while theprojector ismounted tothe ceiling, ifnecessary.
 1.
Turn offthe projector andunplug thepower cord.
 2.
Allow theprojector lamptocool down foratleast onehour.
 3.
Use thescrewdriver includedwiththereplacement...